You are here: Forums Pickups Mazda B-Series Mazda B Series

Mazda B Series

747 messages,  Last post on Oct 23, 2009 at 10:23 PM

You are in the Mazda B-Series Forum. Your Host is kcram

What is this discussion about? Mazda B-Series Pickup, Mazda B-Series Truck, Truck

Messages Page 74 of 75 1 ... 69 70 71 72 73 74 75 Prev Next Last

Go To Msg # Search This Discussion

#730 of 747 Re: Mazda B3000 FFV [ron03] by truckdriftin Jun 27, 2008 (9:16 pm)
Replying to: ron03 (Jun 17, 2008 5:59 am) As far as i know all vehicles that run off of ethanol have a tree leaf emblem on the front fenders. Also if you call a parts store and ask them for a fuel filter and they would be able to tell you which VIN digit tells you if it does. I hope this works for you GOOD LUCK TRUCKDRIFTER
#731 of 747 Re: Mazda B3000 FFV [ron03] by nvbanker Jun 29, 2008 (9:17 am)
Replying to: ron03 (Jun 17, 2008 5:59 am) If the Gas Flap says you can, you can. That is exactly where they put the minimum octane requirement information for you. Fill with confidence and put that corn oil in there!
#732 of 747 Pick up parts? by par6 Aug 02, 2008 (1:19 pm)
I have a 2000...B2500...pickup....short bed...   I'm looking for some tailgate hardware..EX:...support cable..latches and latch bolts, etc;   Is there a web site where I can go too?...much appreciated if anyone can help.   Thanks....Ken
#733 of 747 Diesel wiring diagram anyone? by pnotech Aug 18, 2008 (8:47 am)
I have an '82 Mazda diesel pickup and need a wiring diagram for the engine, or a picture of the wiring around the starter. I replaced the starter, and must not have labeled the wires I removed very well because now I don't seem to be getting any fuel to the injectors. These have an electric fuel cutoff, right? The only manual I can find is a book-sized Chilton, and they haven't been very helpful in the past. Any input would be appreciated!
#734 of 747 Will there be a future B-Series? by boyce Sep 05, 2008 (5:29 pm)
Since Ford is canceling the Ranger, does that mean that Mazda will no longer sell a pickup in the US?
#735 of 747 Uncanceled by moparbad Sep 06, 2008 (8:48 am)
Ford extended the Ranger to 2011. New Ranger will be introduced at that time. It will the global design Ranger and not unique to US/Canada. Mazda has no plans at this time to sell the new version. The compact truck market will have to significantly improve for Mazda to consider a truck offering. Replies to this message: boyce (Sep 06, 2008 1:48 pm)
#736 of 747 Re: Uncanceled [moparbad] by boyce Sep 06, 2008 (1:48 pm)
Replying to: moparbad (Sep 06, 2008 8:48 am) Thanks for your reply. Sorry to hear there will be no Mazda version. Have a good relationship with local Mazda dealer but not so good with the 2 local Ford dealers. Thanks again, Bud
#737 of 747 2008 Ford Ranger Built by Mazda in Thailand by loneranger2 Oct 01, 2008 (4:29 pm)
Have new 2008 Ford Ranger 4cyl Turbo Diesel, 4x4, four door Crew Cab. Was built in Thailand at the Ford/Mazda Plant. Was told it was built on the Mazda B 4000 truck frame. I'm trying to find a Bull Bar to fit the front. IT is a Ford Ranger on a Mazda Frame. Not Soled in the U.S. Con anyone help me out? The Lone Ranger 2
#738 of 747 Global Design Ranger? I HAVE IT!!! by loneranger2 Oct 01, 2008 (4:48 pm)
My 2008 Ford Ranger may just be that NEW 2011 Design. 4cyl TURbo DIESEL!! Four Door Crew Cab with slightly longer bed. Ya'll can look it up on Ford/MazdaThailand 2008 The lone Ranger 2
#739 of 747 1992 mazda 2200 b-series questions? by miket10 Oct 03, 2008 (7:15 am)
I bought this truck cause really it was a steal.500.00 with tons of new parts and brand new panther rims with sales reciept(1380.00 not including the new rubber).Theproblem is with the transmission.They replaced the clutch and evidently while doing so they let the gear oil drain and,didn't bother refilling it.Yeah,it only has 5th and a very very weak reverse.What I was wondering is,are their any other trannys that will bolt up to this.The engine is of course 2.2 but,I'm sure if it's a 92 engine cause it is fuel injected and every book I have found says that is impossible,they didn't make them till a year or two later.Even the owners manual shows a carb.And when I pulled the tranny out it did seem to be about an 1-1 1/2 shorther than it should of been.I say this because you can claerly see where the carrier bearing bracket was at one time and thats how far off it is now.So if you can make any sense out of my ramblin can you give me some advise?I would greatly appreciate it.

Messages Page 74 of 75 1 ... 69 70 71 72 73 74 75 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Mazda B-Series Mazda B Series