Sign In Join 



Mazda B Series

747 messages,  Last post on Oct 23, 2009 at 10:23 PM

You are in the Mazda B-Series Forum. Your Host is kcram

What is this discussion about? Mazda B-Series Pickup, Mazda B-Series Truck, Truck


Messages Page 69 of 75
1
...
66
67
68
69
70
71
72
...
75
Prev
Next
Last
Go To Msg #
Search This Discussion

#681 of 747
Re: Hello: [jrosasmc] by timc
Apr 15, 2006 (10:32 pm)
Reply

Replying to: jrosasmc (Feb 18, 2006 7:45 pm)

I THINK 06 or 07 will be it. Mazda only sold a few thousand last year. I have had 3. An 87 2WD, and 89 4x4 and the one I have now...a 93 4x4 Cabplus. Awesome truck. I go from Eastern oregon to the Idaho Rockies every other weekend(studs all the way around) to teach skiing. Have 160,000 miles and it has NEVER left me on the road. Have done all my own maintenance and STILL on original clutch,rearend and motor, of course which does not burn ANY oil. I change the oil every 3k and put Energy Release in it. But I have just recently began that...about 10k ago. The 93 was the last truck made in Japan. I am sure the quality was better. I see quite a few pre-93s still out there. I JUST WISH MAZDA WOULD COME UP WITH ANOTHER JAPANESE MADE TRUCK OR IT WILL BE THE "TOY" FOR MY NEXT ONE!! Still waiting!!
#682 of 747
Mazda B-series speedometer... by rross1
Apr 16, 2006 (1:21 pm)
Reply
I recently bought a 99 B2500 SE cabplus. The speedometer isn't working below 30mph. Above 30mph it works fine.The odometer doesn't work below 30mph either. Anybody have that experience? Was it the instrument cluster, sensor or speedo cable that was the problem? Thanks for any input.
#683 of 747
Mazda B3000 Transmission Problem by jps9
Apr 19, 2006 (4:07 pm)
Reply
My 2001 B3000 started having automatic transmission shifting problems at 31,000 miles, as you can tell I hardly drive it. It started with a harsh 1-2 shift and then a trouble transmission light. After 3 trips to the dealer and a cost of $900 they resolved the problem by installing a kit that consisted of a updated seperator plate and EPC blowoff valve. The new plate had hole #50 removed, this is where I was losing line pressure. This must be a common problem with these model trucks and the Ford Rangers which are the same. My question is why did it take 31,000 miles to happen and why this is not a recall. I haved emailed Mazda and asked that question. Comments?
#684 of 747
Re: Mazda B2200 Upper Radiator hose [dalano73] by jps9
Apr 19, 2006 (4:16 pm)
Reply

Replying to: dalano73 (Nov 15, 2005 12:16 pm)

You have probably fixed it by now by installing a new hose. I have experienced the same problem and that fixed it
#685 of 747
Re: Mazda B-series speedometer... [rross1] by rross1
Apr 19, 2006 (8:09 pm)
Reply

Replying to: rross1 (Apr 16, 2006 1:21 pm)

Never mind...I fixed it. The ABS light was also on. There is a speed/ABS sensor located on the rear differential. I changed that sensor (about $32.00 at the Ford dealer) and the speedometer works perfectly at all speeds plus the ABS light is no longer on. Yippee!
#686 of 747
Re: Mazda B3000 Transmission Problem [jps9] by barrieau
Apr 21, 2006 (5:17 pm)
Reply

Replying to: jps9 (Apr 19, 2006 4:07 pm)

I had the some problem I had my transmission filter changed and the fluid changed. My truck works great now, mine started at 80,000km.
#687 of 747
Need Help / B2500 Mazda Pick Up Truck by j2me
Apr 29, 2006 (11:52 am)
Reply
Hello,
 
Having a problem with my 1999 pu truck. When I turn left/right the truck quivers/shakes.
 
I checked the power steering fluid which is 3/4 full. Any ideas?
 
Please forward comments to j2me_2000yahoo.com
 
Thanks in advance for your help.
 
jt
#688 of 747
Reminder... by kcram HOST
Apr 29, 2006 (4:22 pm)
Reply
As stated in the post box, please do not post your email address in your messages. Answers shared in the forum instead of email benefit all of us.
 
kcram - Pickups Host
#689 of 747
1986 B2200 Engine Problems by smazda1
Apr 30, 2006 (8:15 pm)
Reply
I have a B2200 and am having engine problems. I was thinking about going to a junk yard to replace it and was wondering if someone knows what other pickup has the same engine? Can I replace a Nissan engine for this one? Any suggestions are appreciated. Thanks
#690 of 747
1997 2300 engine ping by troy43
May 03, 2006 (6:01 pm)
Reply
The engine pings badly with regular gas, and even some with high test. Anyone know how to change the timing, reset the computer, etc. or anything that will allow the engine to run on regular gas without the ping, otherwise, I really can't complain about it, has 166k on it.

Messages Page 69 of 75
1
...
66
67
68
69
70
71
72
...
75
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement