You are here:
Forums
Pickups
Mazda B-Series
Mazda B Series

747 messages, Last post on Oct 23, 2009 at 10:23 PM
You are in the Mazda B-Series Forum. Your Host is kcram
I posted last week concerning the instruments acting up on my 1999 Mazda B4000 and have yet received a response. Let me try this. Does anyone know how the instrument is grounded. I think this is the problem, but can't be sure. If anyone know where and how the panel is grounded this would help in fixing the problem.
|
|
|
Replying to: gentjohn (May 31, 2005 6:44 am) kcram - Pickups Host |
|
I heard that you can stuff a small block under the hood of a b series. has any one done this and have any Idea of what I would need to adjust and change to get this to work?
|
|
|
|
|
Replying to: jorge3 (May 27, 2005 5:25 am) I have the same slippage problem, only during the cold months though . this has been happening to me for a couple of years, now that it is warm I have no problems. I have had my transmission serviced by a nationally know shop and they said they saw nothing wrong other than my fluid being dirty, it had never been changed! I also have a check engine light on, I just drive the darn thing like it is since that is the only problem I have had with the truck, please let me know if you get to the bottom of this mystery. |
|
I recently bought a '94 B-3000 cab plus with 85,000 miles. Since day two the truck won't start most of the time. The first time I thought the battery was completely dead until I turned it a few times and it fired up. I'm wondering if it has someting to do with the clutch needing to be fully engaged to start or if there's a loose connection? Anyone have an idea?
|
|
|
Replying to: gary121 (Dec 18, 2001 5:58 pm) Have a 99 B3000 xtra cab with 4dr, 2 wd V6 w/5spd man transmission. Bought it one year old with 8K miles and now have 90K. Have had "NO" trouble....tuned up once....satisfied. |
|
|
I've lost one of my ignition keys for my B-3000 Mazda pickup...and have heard that dealers charge between $80 to $100 to make duplicates. Is there a way to program a cut key from a locksmith. It's a 2WD xtra cab 4 dr V6 5 spd manual.
|
|
|
When I stop at an instersection or light, the RPMs pulse. The needle literally jumps. What do you think the problem is? ECM? |
|
| Correction. the year is 2002. The whole truck jumps. | |
You are here:
Forums
Pickups
Mazda B-Series
Mazda B Series
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2000 Mazda B-Series Pickup
2009 Mazda B-Series Truck



Browse by Board
Browse by Topic
Today's Chats