You are here: Forums Pickups Nissan Titan Nissan Pickup Owners Hangout

Nissan Pickup Owners Hangout

644 messages,  Last post on Dec 01, 2009 at 10:43 AM

You are in the Nissan Titan Forum. Your Host is kcram

What is this discussion about? Nissan Pickup, Nissan Frontier, Nissan King Cab, Nissan Titan, Truck

Messages Page 63 of 65 1 ... 59 60 61 62 63 64 65 Prev Next Last

Go To Msg # Search This Discussion

#620 of 644 Re: Loud ticking noise from my V6 [driller6] by colohunter Jun 04, 2009 (6:11 am)
Replying to: driller6 (Jun 03, 2009 3:12 pm) The V6 has hydrolic lifters! I think the 4 Cylinder does also. Best to try a can of BG 44K and a crankcase flush with one of those chemicals that's supposed to free stuck lifters. Good luck.   Do you know anything about changing the timing belt on a V6?
#621 of 644 Cold air iontake for 2009 Friontier LE by choochoojohn Jun 04, 2009 (10:45 am)
I'm expecting delivery on a new Frontier LE in early July and would like to add a cold air intake but not sure which one. The dealer is offering to install the Nismo unit , which he said would not affect the warranty since they are installing it but, what I see/read in the forums is usually the K & N or Volant. Is there that much difference in them and will the warranty automatically be voided if they are installed on a new truck?
#622 of 644 Cold air intake for 2009 Friontier LE by choochoojohn Jun 04, 2009 (10:46 am)
I'm expecting delivery on a new Frontier LE in early July and would like to add a cold air intake but not sure which one. The dealer is offering to install the Nismo unit , which he said would not affect the warranty since they are installing it but, what I see/read in the forums is usually the K & N or Volant. Is there that much difference in them and will the warranty automatically be voided if they are installed on a new truck? Replies to this message: obyone (Jun 04, 2009 2:28 pm) choochoojohn (Jun 10, 2009 3:44 pm)
#623 of 644 Re: Cold air intake for 2009 Friontier LE [choochoojohn] by obyone Jun 04, 2009 (2:28 pm)
Replying to: choochoojohn (Jun 04, 2009 10:46 am) Under the Moss Magnuson Act, the dealer or manufacturer cannot deny warranty except on the part being replaced unless they can prove that damages requiring warranty services is directly attributable to that part. While the act protects the consumer against being denied warranty services it still doesn't help when the dealer denies you warranty service regardless of the part being changed.   Despite advertising claims, Truck Trend had done a test using a K&N FIPK system. As K&N is an advertiser in their mag, the test results showed a 2 HP gain +- 2HP.   One of the things that a lot of K&N owners talk about is the oil in the filter being transferred to the MAF. While I owned one this never happened. I guess depending on what you're looking for any of the systems you list will work. That is an increase in the intake suction noise with little gain if any in the HP and MPG. Replies to this message: choochoojohn (Jun 10, 2009 3:44 pm)
#624 of 644 Headlight/electrical by 97se140k Jun 10, 2009 (1:51 pm)
I have a 97 SE. The headlights stopped working this morning(both sides). Went out, turned the knob and they did not come on. I removed any corrosion around the terminal, and still nothing. All other light systems are working( rear breaks, interior,dash, radio, rear turn signalsand runing lights) just the front headlights/turn/running are out. Anyone have suggestions or past experiene with this problem? Thanks for your help.
#625 of 644 Re: Cold air intake for 2009 Friontier LE [obyone] by choochoojohn Jun 10, 2009 (3:44 pm)
Replying to: obyone (Jun 04, 2009 2:28 pm) Thanks for the info. I figured if you increase the air intake the computer is going to increase the fuel also, not wanting to run lean, so you may gain power but you're losing MPG. I'm not a hot rodder nor racer from traffic llights so I think I'll just pass on the cold air intake and put the money to better use.
#626 of 644 Frontiers Future by reddevil4 Jun 11, 2009 (6:55 pm)
I read somewhere a couple of months ago that Nissan was going to discontinue making the Titans after 2010. So I was wondering does anybody know the future of the Frontier Pickups. I would think that Nissan would stay with the smaller pickup and the reason for dropping the Titan was Nissan trying to merge with Chrysler Dodge for the bigger size pickup and technology. Replies to this message: asa (Jun 12, 2009 4:03 pm)
#627 of 644 Re: Frontiers Future [reddevil4] by asa Jun 12, 2009 (4:03 pm)
Replying to: reddevil4 (Jun 11, 2009 6:55 pm) Perhaps a year ago it was announced that Nissan would co-produce a full size truck with Chrysler and it was widely expected that the Titan would then become a Dodge Ram clone. This wasn't a merger, but was a plan to save on production costs. Following Fiat's buyout of Chrysler, no update on this plan has been announced.   I've read nothing that casts Frontier's future in doubt. Some dealer salespeople have been quoted with some whacky tales of Titan, Xterra or Frontier demise, but none of these have ever been supported by fact. It's clear that sales of these are in the doghouse, but I'd think that Nissan would want to maintain a practically-sized truck like Frontier in their line.
#628 of 644 Re: 1996 Hardbody - Oil pressure sensor? [cttoaz] by cttoaz Jun 12, 2009 (4:58 pm)
Replying to: cttoaz (May 30, 2009 11:42 am) I discovered my own answer on the way to changing my timing belt. Next to where the oil filter screws on and towards the front of the engine, their is an oil pressure sensor. I will use a 'T' fitting to add my gauge's sendor tube while maintaining the OEM sensor output.
#629 of 644 Funny Noise by restin84 Jun 15, 2009 (12:45 pm)
Got a thumping/clicking noise when the steering wheel is locked going in reverse. Any thoughts on what it may be? Replies to this message: juumpmaster (Jul 02, 2009 4:40 pm)

Messages Page 63 of 65 1 ... 59 60 61 62 63 64 65 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Nissan Titan Nissan Pickup Owners Hangout