Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Toyota 4Runner Toyota 4Runner Maintenance and Repair
2501 messages, Last post on Nov 23, 2009 at 12:44 PM
You are in the Toyota 4Runner Forum. Your Hosts are steve_ & tidester
|
Replying to: boxtype (Mar 24, 2005 2:20 pm) turn on when the low beam headlight is on, or something to that extend. |
|
|
Replying to: luke20 (Mar 16, 2005 11:09 am) I have a brand new 4runner and happens to me also. I guess the engine is powerful and kinda shakes when you crank it. Once started however, there are no problem. |
|
|
Replying to: boxtype (Mar 24, 2005 2:20 pm)
|
|
|
Replying to: rajr (Mar 24, 2005 6:21 pm) DRL - daytime running lights. RTFM.
|
|
|
|
|
Replying to: tcpoob (Mar 24, 2005 8:10 pm) P.S. It only works in low-beam mode.
|
|
|
PLEASE HELP ME..... WOULD APPRECIATE ANY ADVICE OR COMMENTS ON THIS PROBLEM I have a problem with starting a 95 4 runner.. I changed the engine from a 1990 engine to a 1995 engine by taking everthing from the 95 engine to the 90 engine. Everything matched up except for the wire coming out from around the injectors. The wire coming from the 90 model had a single wire with a ground wire wrapped around it (like a coax). I cut the plug off of the 95 and plugged it into the 95 loom, then cut the plug off of the 90 and plugged it into the wire coming out of the manifold. Stripped the wire on the ends and wired the two together. After doing all this the engine run excellent, except the engine light was on. I was trying to get the engine light to go off so I went back to those wires and switched some of them because I was thinking they were the ground wires and figuring that it was the cause of the engine light to stay on. After doing this the car still runs fine but the engine light is still on. So then I took the battery cables off and touched them together(advice from someone else to get the engine light to go off). I can now get the engine to start but will not stay running. A mechanic suggested that it may be the security system. I am not sure wether this is a factory or add on system. He told me to lock the car up and come back later. I did this and went back to start it and it still is doing the same thing. Is there a way to disable the security system to get it running again or could it be something else. I am stumped here.... PLEASE HELP ME..... WOULD APPRECIATE ANY ADVICE OR COMMENTS ON THIS PROBLEM
|
|
|
I recently bought a 2004 4 runner and the doors would automatically lock and unlock when I started out and stopped and put it into park. All of a suddent the unlocking stopped working. I looked through the owners manual and it said to reset, put into park and hold the unlock down for 5 seconds with the shifter in park. I tried this a bunch of times and still does not work. Has anyone else had problems with this option and do they know of any fixes other than taking it back to the dealer to look at thanks
|
|
|
Replying to: jerry14 (Mar 26, 2005 7:01 am) tidester, host |
|
|
|
|
I went to open the hood and nothing happened. The hood lock release lever {next to the fuel door lever} fell into my hand. I tried to pull on the cable from there and still no luck. Could someone PLEASE tell me how to get the hood open and fix the release lever???? Thanks for any and all help anyone can assist me with...HAPPY EASTER ALL! |
|
|
Replying to: jfb931 (Dec 31, 2004 12:19 pm) |
|
You are here:
Forums
SUVs Toyota 4Runner Toyota 4Runner Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Toyota 4Runner
Browse by Board
Browse by Topic
Today's Chats
