You are here:
Forums
SUVs
Toyota 4Runner
Toyota 4Runner Maintenance and Repair

2501 messages, Last post on Nov 23, 2009 at 12:44 PM
You are in the Toyota 4Runner Forum. Your Hosts are steve_ & tidester
| Took my '03 Sport in for the same issue. Dealer ordered me a new seat. Still waiting for its' arrival as they are backordered. Seems to indicate a common problem. | |
|
hello,i just bought a 4runner limited with the push button 4WD system and either iam doing something wrong or its not working. under the visor there is instructions on how to use 4WD but when i do as it says nothing happens iam not getting the 4WDlight on the cluster or anything if i put in 4wheel low it does kinda jumps up when i put it back in drive but for some reason the front wheels are not ingaging i tryed putting it in 4wd and driving to maybe lock it in but still nothing does this seem like a eletronic problem or what ...PLEASE HELP thanks |
|
|
I recently bought an '05 SR5 with 3rd row seats. I cannot figure out how to turn the fog lights on? or is there any?seems like ther is a fog lamp installed..no switch is found. your reply will save my trip to the dealer. thanks, Black 4runner
|
|
|
Replying to: boxtype (Mar 24, 2005 2:20 pm) turn on when the low beam headlight is on, or something to that extend. |
|
|
Replying to: luke20 (Mar 16, 2005 11:09 am) I have a brand new 4runner and happens to me also. I guess the engine is powerful and kinda shakes when you crank it. Once started however, there are no problem. |
|
|
Replying to: boxtype (Mar 24, 2005 2:20 pm)
|
|
|
Replying to: rajr (Mar 24, 2005 6:21 pm) DRL - daytime running lights. RTFM.
|
|
|
|
|
Replying to: tcpoob (Mar 24, 2005 8:10 pm) P.S. It only works in low-beam mode.
|
|
|
PLEASE HELP ME..... WOULD APPRECIATE ANY ADVICE OR COMMENTS ON THIS PROBLEM I have a problem with starting a 95 4 runner.. I changed the engine from a 1990 engine to a 1995 engine by taking everthing from the 95 engine to the 90 engine. Everything matched up except for the wire coming out from around the injectors. The wire coming from the 90 model had a single wire with a ground wire wrapped around it (like a coax). I cut the plug off of the 95 and plugged it into the 95 loom, then cut the plug off of the 90 and plugged it into the wire coming out of the manifold. Stripped the wire on the ends and wired the two together. After doing all this the engine run excellent, except the engine light was on. I was trying to get the engine light to go off so I went back to those wires and switched some of them because I was thinking they were the ground wires and figuring that it was the cause of the engine light to stay on. After doing this the car still runs fine but the engine light is still on. So then I took the battery cables off and touched them together(advice from someone else to get the engine light to go off). I can now get the engine to start but will not stay running. A mechanic suggested that it may be the security system. I am not sure wether this is a factory or add on system. He told me to lock the car up and come back later. I did this and went back to start it and it still is doing the same thing. Is there a way to disable the security system to get it running again or could it be something else. I am stumped here.... PLEASE HELP ME..... WOULD APPRECIATE ANY ADVICE OR COMMENTS ON THIS PROBLEM
|
|
|
I recently bought a 2004 4 runner and the doors would automatically lock and unlock when I started out and stopped and put it into park. All of a suddent the unlocking stopped working. I looked through the owners manual and it said to reset, put into park and hold the unlock down for 5 seconds with the shifter in park. I tried this a bunch of times and still does not work. Has anyone else had problems with this option and do they know of any fixes other than taking it back to the dealer to look at thanks
|
|
You are here:
Forums
SUVs
Toyota 4Runner
Toyota 4Runner Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Toyota 4Runner



Browse by Board
Browse by Topic
Today's Chats