Sign In Join 



Toyota 4Runner Maintenance and Repair

2501 messages,  Last post on Nov 23, 2009 at 12:44 PM

You are in the Toyota 4Runner Forum. Your Hosts are steve_ & tidester

What is this discussion about? Toyota 4Runner, SUV


Messages Page 251 of 251
1
...
245
246
247
248
249
250
251
Prev
Next
Last
Go To Msg #
Search This Discussion

#2495 of 2501
Power door locks unlock but won't lock by ramhemi03
Nov 03, 2009 (10:33 am)
Reply
I am experiencing the exact same problem with a 1999 4runner limited as I have read many others have with power locks. I just bought this truck and the dealer had already replaced the actuator. When I got the truck it would unlock every time and would only lock the doors occasionally. Now it does not lock at all, except manually and still unlocks with the door button or remote. I found on toyotanation.com a reply that sounds feasible, but I have not tried it yet. This person said to replace a fuse block that is under the steering column. Supposedly he did it himself and it fixed the problem. He mentioned that there are about 12 harnesses that have to be unplugged to get to the fuse block and also that there are 2 large fuses that would need to be replaced. It was mentioned that the part was approx $238 and the dealer wanted $260 to install it but he did it himself in about 1-1.5 hours. Does this sound right and can the average Joe do this?
#2496 of 2501
2000 V6 4Runner Limited by svaladez
Nov 09, 2009 (4:46 pm)
Reply
While driving home today, I opened the sunroof and it would tilt but not open all the way. I eventually opened it, without any weird sounds that I recall. Now that I'm home, the sunroof is midway and will not close. I tried holding the button for 10-15 seconds as some advised, and it opened all the way instead. I tried manually pulling the sunroof shut, but have not had any luck. Please help me!
#2497 of 2501
2006 4Runner VSC light comes on by hulk3
Nov 12, 2009 (7:57 am)
Reply
Have a 2006 4Runner. Cranked veh and Check Engine light came on along with the VSC lights (VSC Off light, VSC Track light, and Veh icon light). Lights remain on while driving...2 days now. Veh runs fine. Have switched from 2wd to 4wd and back. No problems. I also checked all fluid levels due to Check Engine light coming on...all is well. Does anyone have any suggestions or opinions ? Thanks
#2498 of 2501
Re: 2006 4Runner VSC light comes on [hulk3] by jpp5862
Nov 13, 2009 (6:56 am)
Reply

Replying to: hulk3 (Nov 12, 2009 7:57 am)

I had this happen on my 2006. Since all the VSC lights were on I assumed it was some kind of fault, so I took it to the dealer. They told me it was because I hadn't put the gas cap on tight enough and charged me $50. I've always known that not tightening the gas cap would turn on the check engine light, but found it suspect it would also turn on ALL the VSC lights, but they were insistent that it would. I'm still not sure that was the problem, but it's never happened again since.
#2499 of 2501
Re: Oil Changes and Tires [chuck1919] by ramhemi03
Nov 13, 2009 (7:36 am)
Reply

Replying to: chuck1919 (Aug 30, 2009 12:06 pm)

5k mile oil changes with highway use is more than sufficient. I would recommend the BFGoodrich radial Long Trail if 2WD or the Rugged Trail if 4WD if used off road at all.
#2500 of 2501
Power door locks unlock but won't lock by ramhemi03
Nov 23, 2009 (11:39 am)
Reply
For all of the 4 Runner owners that are having problems with the power locks that will unlock but not lock electronically. I found one person that actually sounded like he knew the fix, so I checked with a couple service techs and then bought the part and installed it myself and everything is working great. I do not know that it is the same part for all years but the 99 4runner part # is 8273035260. Toyota list is $259.95, I bought mine on line from Toyota of Richardson in Richardson, TX for $203 including S&H. I took about 45 minutes to an hour to install. The part is the tan colored fuse block at driver's left knee. Take panel off and 2 bolts hold fuse block in. There are 14 or 15 wiring harnesses plugged into the block. I numbered each one with a sharpie as I took them loose and numbered the new block accordingly. If I can do it, you can too.
#2501 of 2501
Re: Power door locks unlock but won't lock [ramhemi03] by ramhemi03
Nov 23, 2009 (12:44 pm)
Reply

Replying to: ramhemi03 (Nov 23, 2009 11:39 am)

Don't forget to disconnect the battery while you are working on the fuse block.

Messages Page 251 of 251
1
...
245
246
247
248
249
250
251
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement