You are here:
Forums
Coupes & Convertibles
Honda S2000
Honda S2000

604 messages, Last post on Mar 24, 2009 at 3:21 PM
You are in the Honda S2000 Forum. Your Host is claires
|
I will be taking delivery of a new 2006 and noticed that it had a large number of 'bumps' on the dash. Inspecting other S2000's on the lot showed that two of them had none and another had a couple. I know of another person on this forum who had a similar issue and had to go through some pain to resolve it. Wonder if this is a common problem and if this has eventually has gotten worse over time? Regards Mike
|
|
|
|
|
Hi everyone , I am sadly selling my S2K.... 05' silverstone metallic with red/black leather interior. Clean title. Clean car. It has 24,500 miles on it. Warranty is good until 36,000 miles. I got a new job so I require a bigger car. I am located in Glendale, CA. I am posting the selling price at $25,000 obo. If interested please respond to my e-mail at hamovdjhotmail.com Thanks.
|
|
|
Replying to: craterus (Nov 01, 2006 3:46 pm) Cheers!! --njexpress |
|
|
|
|
Replying to: ralpsars (Mar 10, 2007 5:25 pm) I tried to undo my trade only one day later but the San Antonio Honda Dealorship wouldn't let me. |
|
|
Replying to: arostamian (Mar 18, 2007 10:53 am) But at least it still cost you a fraction of what a loaded Z4 or Boxster would have. Good luck. |
|
|
Replying to: mprasad (Mar 17, 2007 12:14 pm) |
|
|
Hi, Just wanted to post my experiences on "Dent Removal with Dry Ice". Some good samaritan had opened a door on my S2K's passenger side door that left a deepish dent a few months ago. Being a detail Nazi high on Zaino's results, this annoyed me to no end until I decided to try out the dry ice technique. I initially heated the surface of the dent with a hair dryer for about a minute and applied dry ice over it for a minute. I kept repeating this at least seven times and I am not even ready to imagine if it did anything to the dent. Is this because dry ice does not do the trick or Is the gauge of the sheet metal too thick? I honestly can't say. I decided it is not even worth a try on my M Class considering the sheet metal can only be just as thick if not thicker. I was initially upset but, all it took me for another spin on a twisty road and my smile returned - Heck! Dent on door panel or not - An S2K is still what it is!! My take on this thing: Do not bother applying dry ice if there is a dent on your S2K door - Just shop around for a body shop or a PDR location. Cheers!! --njexpress
|
|
|
|
|
Replying to: njexpress (Jun 15, 2007 5:48 am) |
|
|
Replying to: njexpress (Jun 15, 2007 5:48 am) But, in any event, you should be able to find a paintless dent removal service that will restore your S2000 to original condition.
|
|
|
Replying to: habitat1 (Jun 15, 2007 9:35 am) Thanks for the response. It was not even on the crease. In fact, it was an inch above the crease line. Members in S2KI have reported sucess but, Just my luck! I had to park this one time, next to cars - Normally, I park a mile away from the rest of the cars but just the day before, I had a shopping cart right next to my car in an otherwise deserted area of the lot - It looked like I was being sent a message, almost Anyways, the one PDR technician within a 50 mile radius is only available 7 Am thru 10 AM, Monday thru Friday and I would already be at work at that time - Guess I have to take time off to do that - The more I think about it, it only makes me madder that people have no consideration for other's prized posessions - Oh Well - Nobody can be flawless, I guess... Not even my S2000.... Cheers!! --njexpress |
|
You are here:
Forums
Coupes & Convertibles
Honda S2000
Honda S2000
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Honda S2000



Browse by Board
Browse by Topic
Today's Chats