You are here: Forums Sedans Nissan Maxima Nissan Maxima Accessories and Modifications

Nissan Maxima Accessories and Modifications

51 messages,  Last post on Nov 08, 2008 at 3:55 PM

You are in the Nissan Maxima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Maxima, Sedan

Messages Page 3 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

#12 of 51 Re: 1998 NISSAN MAXIMA BRAKE QUESTION.. [execute007] by 99maximase Oct 22, 2005 (7:16 pm)
Replying to: execute007 (May 03, 2005 7:41 am) I had a similiar problem with my 99 maxima se. Inside the brake calipers there are a few little clips that put pressure on the brake pads. What happened is that they wore away and now the pads are ratling in the caliper. I went to AutoZone and got the coreect clip kit (ONLY 5.00) and that took care of problem.   Hope that helped.
#13 of 51 satellite radio by gtgray Nov 19, 2005 (2:15 pm)
I have a 2005 SL, but it did not have satellite radio from the factory (Bose radio has sat controls already built in). Has anyone added satellite radio from Nissan dealership? If so, how much did it cost?   thanks
#14 of 51 windshield replacement by maxim04 Dec 29, 2005 (11:29 am)
My 04 Max has a cracked windshield that will have to be replaced. I checked with the local dealer who quoted $ 500 for orig. windshield and labor. I also came across a company called PPG glass that makes OEM(for GM,BMW, Honda, Toyota ) as well as replacement glass for Nissan(they say it meets the specs). One can get it installed at their authorised places for $250. Has anyone got a PPG glass or other replacement on their Maxima? PPG seems to be a reputable company but i dont know if i should use it or go to the nissan dealer. Here are the links to PPG. http://corporateportal.ppg.com/NA/OEMGlass/Information/Vehicles/ http://www.ppgprostars.com   Any advice/suggestion is welcome. Replies to this message: poodog13 (Jan 03, 2006 5:56 am) prene (Apr 13, 2007 4:55 pm)
#15 of 51 Re: windshield replacement [maxim04] by poodog13 Jan 03, 2006 (5:56 am)
Replying to: maxim04 (Dec 29, 2005 11:29 am) Has anyone got a PPG glass or other replacement on their Maxima?   I haven't had a PPG replacement on a Maxima, but know the company quite well and know several people who work for their auto glass division (I live in Pittsburgh where the company is headquartered). I would have absolutely no worries about the glass itself, just make sure the installer is reputable and stands behind their work because if you do have problems, it will be more due to install problems than glass fitment.
#16 of 51 my horn doesn't honk when i arm the alarm by tgregg91 Apr 11, 2006 (5:06 pm)
i would like to know if some1 could tell me how to program my factory alarm so my horn will honk when i arm the alarm and my horn does work. Replies to this message: jwt001 (Dec 04, 2006 12:26 pm) alexlloyd (Nov 08, 2008 3:45 pm)
#17 of 51 SR Performance Rotors by gregorym May 13, 2006 (4:41 pm)
I am looking to get performance rotors for my 2000 Nissan Maxima SE. I looked around and found SR Performance Rotors at ebay. They are coming from canada and are cross drilled. Has anyone heard of these rotors or have suggestions as to the ones that work best. I was going to replace all four at once. The cost of the rotors will be around $230 with shipping.
#18 of 51 aftermarket shiftknob by o2bavw May 17, 2006 (1:18 pm)
I need a little bit of help, I just bought a 2002 maxima 6-speed se, and the car is in great shape but the leather on the shift knob is kinda worn out, so i went out and bought an aftermarket shift knob, and it wont work because of the piece you have to pull up on to get it into reverse that goes into the bottom of the factory one. i cant be the first person that has run into this problem, so if anyone has an answer for me i would greatly appreciate it. Replies to this message: perna (May 18, 2006 9:19 am)
#19 of 51 Re: aftermarket shiftknob [o2bavw] by perna May 18, 2006 (9:19 am)
Replying to: o2bavw (May 17, 2006 1:18 pm) I need a little bit of help, I just bought a 2002 maxima 6-speed se, and the car is in great shape but the leather on the shift knob is kinda worn out, so i went out and bought an aftermarket shift knob, and it wont work because of the piece you have to pull up on to get it into reverse that goes into the bottom of the factory one. i cant be the first person that has run into this problem, so if anyone has an answer for me i would greatly appreciate it.   www.maxima.org   Your answer lies there. 100% guaranteed, or your 2c back.   (sorry, I have an AT)
#21 of 51 Cross Drilled Rotors by gregorym May 21, 2006 (8:45 am)
Anyone recommend a high performance brand for a 2000 Nissan Maxima SE. I am purchasing Hawk break pads front and rear and looking into high performance rotors. Does anyone have them on their Maxima and recommend a brand? If so, where did you buy them and around how much were they? I am going to replace front and rear at the same time. Thanks.

Messages Page 3 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Nissan Maxima Nissan Maxima Accessories and Modifications