Sign In Join 



Mercedes-Benz E-Class Maintenance and Repair

1094 messages,  Last post on Oct 21, 2009 at 5:02 PM

You are in the Mercedes-Benz E-Class Forum. Your Hosts are pat & karens

What is this discussion about? Mercedes-Benz E-Class, Sedan, Wagon


Messages Page 94 of 110
1
...
91
92
93
94
95
96
97
...
110
Prev
Next
Last
Go To Msg #
Search This Discussion

#930 of 1094
2001 E430: Replacing fog light bulb by jodar96
Mar 12, 2007 (2:49 pm)
Reply
There is nothing in the owners manual about how to replace the front fog light bulbs. My guess is that I have to drive the car on ramps, remove both underbody plastic panels, and reach the back of the fog light assembly.
 
Is this correct or the inner fender plastic piece removal will give me access to the bulbs?
 
Thanks,
Joe
#931 of 1094
Speaking of bulbs.... by microrepair
Mar 26, 2007 (1:48 pm)
Reply
One of the front side marker bulbs has burned out on my 2001 E320. The manual says very simply to just reach inside the fender and press on the tab to release the lamp assy and pull it away from the car and change bulbs.. Right ! OK, so how do I press some tab that isn't there, or maybe I just can't find it.. Any hints on how this works??
 
All I can see/feel is a triangular indented hole in the fender inner liner and one finger can make it through that hole and all I feel inside the hole is just some molded plastic ribs. Should there be a tab right inside the hole or sticking through the hole or what?
#932 of 1094
2001 E-320 brakes by steve3226
Mar 26, 2007 (5:48 pm)
Reply
My mechanic says he always has to replace the front rotors on E-320s but not on other makes. Why is this. My wife Lexus RX brake replacement was much cheaper than on the E-320. Why isn't there a warning light to tell when the brakes are worn to the extent of pad replacement?
 
For 6 years I've enjoyed driving the E-320 and had relatively few problems, however, my wife's RX has had zero problems in the 3 years we've had it. After reading the posts here, I think I'll go for a Lexus ES or GS next time even though I prefer the E-320. Reliability/quality build trumps a slight advantage in handling.
#933 of 1094
Re: 2001 E-320 brakes [steve3226] by Mr_Shiftright HOST
Mar 26, 2007 (6:15 pm)
Reply

Replying to: steve3226 (Mar 26, 2007 5:48 pm)

Most modern Mercedes (and many other cars) require throwing away the rotors if they have any marking or warping.
#934 of 1094
Re: 2001 E-320 brakes [steve3226] by microrepair
Mar 30, 2007 (7:46 am)
Reply

Replying to: steve3226 (Mar 26, 2007 5:48 pm)

One of the reasons that the brakes on MB's are so good is that both the pads and rotors are intentionally a little softer than on other makes. This allows the pads and rotors to wear a little more and keeps the rotor temperature (under severe use) from getting so hot that it warps the rotors. The extra wear on the rotors leaves them too thin to be lathe turned for re-use. That is why almost all MB's with OEM pads and rotors have lots of brake dust on the wheels.
 
I switched to PBM pads and rotors over a year ago, on my 2001 E320, and not only do they work as well in non-racing situations or on non-mountainous roads, they generate almost NO brake dust. I only have to clean the wheels every 3-4 months, not days as with the OEM parts. Another benefit is that the pads and rotors cost about 40% less than the OEM parts.
#935 of 1094
2003 E320 by zeen
Apr 12, 2007 (5:14 am)
Reply
Just bought a pre-owned 2003 E320 (out of warranty) and I have a bunch of questions as I fix up this vehicle. It's in good shape but little things need to be fixed.
My first issue is the switch for the moonroof. It works fine but the gray plastic switch cover is missing. I have to use the black plastic skeleton to move the roof. I was told the switch cover cannot be purchased separately and that the entire roof unit needs to be replaced for about $350. All this for a 50 cent plastic switch cover about 1.5" square.
Any suggestions on obtaining just the switch cover.
Also, I heard there is a TSB for some front bolts that may need tightening. Anyone have any info on that.
I will have more questions as I go along and appreciate your help.
Thanks
#936 of 1094
buying a MB factory buyback by dandg
Apr 13, 2007 (1:11 pm)
Reply
Looking at BMW 5 series,GS and the MB E series for a used,under 40k miles 02-04 car.Wife has a RX330 and although not perfect wants to keep it so I would prefer to by something with a different badge then Lexus and like the look of the MB the best si I sense I am ready to roll the dice.
Question is,after reading all three manufactures threads on here the MB E class seems to have most complaints.While on Ebay surfing( there is one guy in Phoenix who seems to have several) I see several MB factory Buybacks that have been repaired by factory for everything from Battery(?) to SRS,Brake and various Eletric problems.Has anyone ever gone that route and with all I have read here would you think there is even mre risk of a lemon.
thanks in advance
#937 of 1094
Re: 2003 E320 [zeen] by bottomsupp
Apr 13, 2007 (10:35 pm)
Reply

Replying to: zeen (Apr 12, 2007 5:14 am)

Telephone:
 
Aurora Auto Wrecking Inc
 
9217 Aurora Ave N
Seattle, WA 98103
(206) 524-8700
 
They are the number one place in NW to get parts. Cost are very good.Not like east coast... but very good. Would help if you had some type of part number... if not they will still help you. GOOD LUCK!
#938 of 1094
Re: 2003 E320 [bottomsupp] by zeen
Apr 14, 2007 (12:28 pm)
Reply

Replying to: bottomsupp (Apr 13, 2007 10:35 pm)

Bottomsup
I assume you were responding to my message about the switch. I will give them a try. I am in the Northeast but perhaps they would mail the part to me.
Thanks
#939 of 1094
2003 E320 Headlights/Radio by zeen
Apr 24, 2007 (3:25 am)
Reply
Is there a way to remove the headlight cover (or to access the interior of the headlight assembly) to clean the lenses? I noticed the lenses have spots on them either from leakage or condensation.
Also, I too have a radio issue. It starts getting static and it gets louder until the radio cuts out and I get a message "Error cannot establish audio connection". It happens sporadically. Any advice is appreciated.

Messages Page 94 of 110
1
...
91
92
93
94
95
96
97
...
110
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement