Sign In Join 



Mercedes-Benz E-Class Maintenance and Repair

1094 messages,  Last post on Oct 21, 2009 at 5:02 PM

You are in the Mercedes-Benz E-Class Forum. Your Hosts are pat & karens

What is this discussion about? Mercedes-Benz E-Class, Sedan, Wagon


Messages Page 91 of 111
1
...
88
89
90
91
92
93
94
...
111
Prev
Next
Last
Go To Msg #
Search This Discussion

#892 of 1094
Re: 2001 E430 Bad Catalytic Convertor?? [jodar96] by microrepair
Dec 27, 2006 (5:05 pm)
Reply

Replying to: jodar96 (Dec 05, 2006 6:51 pm)

I had the same rattle on my 2001 E320 a few weeks back and drove to the dealer as soon as I could get there. I was afraid something was about to fall off or otherwise self destruct. As soon as the service manager walked up the car, he smiled and said it was a converter. They checked it out with some fancy gizmo a few days later and said the other converter was alright but the right hand one had gone bad and would not pass inspection unless replaced. They quoted $970 and I screamed in pain.. I too thought that all emissions parts were covered under federal law to 100K miles. So I went to my local mechanic who replaced it for about $830 even though he had to pay the MB price for the converter itself.
 
I had searched the internet for cheaper converters and asked my mechanic about them. His advice is to stay away from them because the 3rd party ones don't have the full load of precious metals needed to last for a reasonable time. He did a cheap one for a customer last year and in 3 months it had gone bad and then the customer had to pay for the OEM part anyway.
 
I had forgotten that the left side converter was replaced by the dealer under warranty at around 65K miles. My 96 had never needed a converter when I finally sold it at 140K miles. Converters are just one more item that MB has chosen to cheapen up...!
#893 of 1094
Re: 2001 E430 Bad Catalytic Convertor?? [microrepair] by jodar96
Dec 28, 2006 (9:15 am)
Reply

Replying to: microrepair (Dec 27, 2006 5:05 pm)

How many miles do you have on your 01 E320? After looking at the catalytic converter assembly..I call it assembly since there are two converters one undeneath and one by firewall, I would only use OEM part. I don't care how much they charge. Aftermarket is good for oil filters, bulbs, but not this item.
 
The service manager said that just because one was bad that does not mean the other one will go bad....Oh well, both of yours went bad. I am glad they replaced mine under warranty.
 
I need to start saving my money for the time when the other one goes bad!! I doubt MB cheapened the part. The part supplier could have had raw material/processing issues.
 
Joe
#894 of 1094
Re: 2001 E430 Bad Catalytic Convertor?? [jodar96] by microrepair
Jan 05, 2007 (2:43 pm)
Reply

Replying to: jodar96 (Dec 28, 2006 9:15 am)

Yes, the converter is an assy of two converters and connecting pipes. My 01 E320 had approx. 84K miles when the second assy had to be replaced.
 
You mention aftermarket bulbs; I just discovered yesterday that NAPA dealers carry a lot of the weird bulbs for MB's. You can save enough for 2 cups of coffee on each bulb..
#895 of 1094
Re: Safety news/ Headgasket [ray_h1] by ccmbduong1
Jan 06, 2007 (1:45 pm)
Reply

Replying to: ray_h1 (Dec 23, 2006 10:18 am)

Thanks Ray h1... I checked and saw no oil floating on surface of coolant, oil level seems unchanged for months, I also checked trans oil dip stick and observed no change... So where is oil leak coming from... Any suggestion? Maybe I should take it to my indy master mechanic to check it out. Thanks
#896 of 1094
Re: 2001 E430 Bad Catalytic Convertor?? [microrepair] by blckislandguy
Jan 07, 2007 (7:43 am)
Reply

Replying to: microrepair (Jan 05, 2007 2:43 pm)

Micro, you've mentioned in the past the good luck you've had with your Boston-area MB dealer. I'd appreciate it if you would let us know who it is. What town is your indy master mechanic in?
#897 of 1094
Re: Safety news/ Headgasket [ccmbduong1] by ray_h1
Jan 08, 2007 (8:54 pm)
Reply

Replying to: ccmbduong1 (Jan 06, 2007 1:45 pm)

)) "So where is oil leak coming from" ((
 
Having a trusted mechanic check it out for you is likely your best bet. My own guess is that you've got a relatively minor gasket leak somewhere. Nuisance stuff - maybe even somewhat involved* to get to and fix, but nothing catastrophic.
 
*Hey, it's a Benz - if there's a more complicated way to do something simple, Daimler-Benz will eventually discover and implement it...
#898 of 1094
Good riddens 2002 E320 by mukhtar
Jan 12, 2007 (6:39 pm)
Reply
I have now sold my 2002 E320. So relieved. It has been nothing but trouble that car. I kept taking it back to the dealer for repairs and replacement of parts. Luckily I hadn't needed to pay a cent as repairs were covered under warranty. But the inconvenience of taking it there so often, on average once or more every 2 months, the receptionist learnt my first name for seeing me too often. I will never ever buy a Mercedes .
#899 of 1094
Re: Update on smoking E 350 [engineer1] by engineer1
Jan 15, 2007 (10:12 am)
Reply

Replying to: engineer1 (Nov 28, 2006 4:56 pm)

latest on smoking E-350. since software update was installed on oil pressure monitor, no sign of smoke. admittedly haven't driven the car that much lately, but looks promising. again the software folks bite; seems to be the story of my life.
#900 of 1094
Re: Safety news/ Headgasket [ray_h1] by ccmbduong1
Jan 17, 2007 (2:16 pm)
Reply

Replying to: ray_h1 (Jan 08, 2007 8:54 pm)

Confirmed by my mechanic that's a head gasket problem (normal for '96 E320 at around 80-120K miles)... Mine is only 77K. Two dealers want $2000-2200... My MB mechanic quoted $1500-$1800 , but he does not know the final $$$ until he opens the engine. Have my car scheduled for next Tuesday with my MB indy, he told me that it probably takes 3 days... and this guy is very good, he also has a machine shop just in case that he needs to planarize the head... Will let you guys know when it's done
#901 of 1094
'07 E-350 Rolling forward when in reverse by stockerup
Jan 24, 2007 (6:46 pm)
Reply
I almost had a wreck this past weekend. I was trying to turn around on an incline. I put the car in reverse and when I took my foot off the break to give it gas, the car started rolling forward. Has anyone else had this problem?
  
I have 07 E350. Now my wife is affraid to drive the car.
  
Any comments would be appreciated.
  
Thanks
  
Stockerup

Messages Page 91 of 111
1
...
88
89
90
91
92
93
94
...
111
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement