You are here: Forums SUVs GMC Yukon GMC Yukon and Yukon Denali Problems

GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV

Messages Page 78 of 78 1 ... 72 73 74 75 76 77 78 Prev Next Last

Go To Msg # Search This Discussion

#770 of 779 Re: transmission clunking [antifreeeez] by rsht Oct 01, 2009 (8:57 am)
Replying to: antifreeeez (Sep 29, 2009 2:47 pm) If you have the OEM Auto-leveling System, then you 1st would probably have a hard time finding those after market air-shocks (i.e. from Monroe and etc.) for the application. Although, I have seen some past post about Bilstein may have something that's close, but your on- board computer will display some sort of "Ride Control" message all the time, which can be a pain... I would suggest to checkout the place called Arnott, their price is much more reasonable than of a GM Dealership... Hope that helps. Good Luck! http://www.arnottindustries.com/part_GMC_Air_Suspension_Parts_yid15_pid95.html
#771 of 779 Re: wtf? [jzdziarski] by marymc73 Oct 03, 2009 (10:44 pm)
Replying to: jzdziarski (Jun 07, 2005 11:06 am) yes they do i have gotten very useful information,but you can always go to the dealer and see what they say.
#772 of 779 2000 yukon xl electrical problem by prostreet Oct 06, 2009 (11:35 am)
i'm having a problem with the electronic portion of the gauge cluster,,where the gear shift indicator showing the gear and milage of the car seems to flicker on and off and the computer service center seems to do the same,,,what could it be
#773 of 779 Re: 2007 Yukon Denali XL [texasaggie97] by roughd1 Oct 07, 2009 (3:22 pm)
Replying to: texasaggie97 (Aug 26, 2009 12:50 pm) Smart move having the extended warranty. My 04 Denali is in the shop right now having the front and rear "actuators" replaced along with the intermediate shaft and steering gear. My wallet says "ouch". Does this sound right to anyone out there. I don't mind having the vehicle serviced because it has been great the last 5 years and 115,000 miles just don't want to get screwed.
#774 of 779 someone help pls!!! by cyntone Oct 28, 2009 (5:23 am)
i have an 03 yukon denali. it looks sweet and i love it and usually drives great.... but.. lately it has been in the shop numerous times. the engine light comes on then shortly after that i get a reading that says ENGINE POWER REDUCED then it will only do 35 at the most. i have took it in to get looked at and they can't seem to isolate the problem... someone anyone pls help!! Replies to this message: tsutter (Oct 28, 2009 3:40 pm) smallridge (Oct 30, 2009 1:46 pm)
#775 of 779 Re: GMC Yukon Denali Problems [greenhead] by smallridge Oct 28, 2009 (6:06 am)
Replying to: greenhead (Mar 25, 2009 1:00 pm) Did you ever straighten out the aout leveling issue. If so ours contin ues to kick on and off for no apparent reason. We would appreciate your learning curve help Replies to this message: rsht (Oct 29, 2009 3:01 pm)
#776 of 779 Re: someone help pls!!! [cyntone] by tsutter Oct 28, 2009 (3:40 pm)
Replying to: cyntone (Oct 28, 2009 5:23 am) we had the same problem with our 2007 yukon and i put a scanner on it and it said something was wrong with the accelerator sensor. I unplugged the wiring harness that is hooked to the accelerator pedal and blew some air in it an plugged it back in and never had a problem with it AGAIN..... Shop was going to charge me no less 200.00 and i did it for nothing..... GOOD LUCK and let me know if this pans out.... Replies to this message: smallridge (Oct 30, 2009 1:46 pm)
#777 of 779 Re: GMC Yukon Denali Problems [smallridge] by rsht Oct 29, 2009 (3:01 pm)
Replying to: smallridge (Oct 28, 2009 6:06 am) If your Auto-leveling system (compressor) continues to turn ON and OFF without any change to the carrying load in the vehicle, then its likely that your system is experiencing a small leak (one of the shocks or line/hose); one of the places I would first check is the hose connection at each shock (perhaps use some soapy water... ??), then move each hose (for any crease) back track to the compressor... Its a long shot, but there is a potential for a bad level sensor switch... but not very likely in my opinion. Good Luck !
#778 of 779 Re: someone help pls!!! [tsutter] by smallridge Oct 30, 2009 (1:46 pm)
Replying to: tsutter (Oct 28, 2009 3:40 pm) Thanks I will try it
#779 of 779 front end noise by roughd1 Oct 31, 2009 (6:36 am)
Hello out there. I recently had the steering gear replaced on my 04 Denali by the dealership service dept. Vehicle rides great except when on rough or uneven pavement there is a loud vibration/rattling sound coming from the front left side. Took it back to them 4 times already and get all kinds of BS like "we can't make the vehicle replicate the symptom" or "that's your anti-lock brake motor engaging". I asked, why would it engage when I'm not braking? and the vehicle didn't have this problem before you all serviced it, reply "we don't know" but they made no attempt to diagnose the problem. Does anyone have a suggestion or idea of what's wrong? I'm writing a complaint letter to the dealership owner, management and GM. Thanks. sorry for the long post

Messages Page 78 of 78 1 ... 72 73 74 75 76 77 78 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon and Yukon Denali Problems