Sign In Join 



GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV


Messages Page 72 of 79
1
...
69
70
71
72
73
74
75
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion

#707 of 779
The cyl 3 random misfire 2002 yukon Denali by 02gmcyukon
May 19, 2009 (2:43 pm)
Reply
Well well well I have a Random Misfire
so far I have done tune up wires
fuel injector cleaning,throttle body
and intake.Once you drive above 50 MPH
and stay above that for about 10 Min check engine flashes
then stays on scan it and the same code What am I missing hear.
#708 of 779
Re: Steering Wheel Vibration [jallard] by leetho
May 21, 2009 (4:25 am)
Reply

Replying to: jallard (Jul 09, 2008 7:10 pm)

I have a similar problem with my 2004 Denali, vibration in the steering wheel between 1500 - 2000 rpm and 50-55 mph. Had the vehicle at the dealership twice and they still cannot figure out the problem. Just changed the rims to 22 inch, still the same problem. They were hoping this would have solved the problem. Now I'm in a battle with them because they have not clue what to do.
 
HELP!
#709 of 779
Re: Steering Wheel Vibration [leetho] by rsht
May 21, 2009 (8:56 am)
Reply

Replying to: leetho (May 21, 2009 4:25 am)

Some times bad wheel bearing can be one of the cause to wheel vibration; but, in this case have you checked the steering/ball joints first to see if any is worn (have the joints been regularly lubricated)? One other possibility is the wheel alignment, assuming your wheels are balanced, and all joints are solid...
#710 of 779
Re: NAV /DVD [rotti92201] by cann1
May 24, 2009 (1:01 pm)
Reply

Replying to: rotti92201 (Oct 27, 2006 5:11 pm)

I just purchased a '02 Denali XL & it has this noise in the front drivers side that sounds like a rearend bearing noise! Has anyone had this problem with the Denali XL & what was done to fix it??
#711 of 779
Rear AC problem by xander71
May 25, 2009 (5:23 am)
Reply
I have a 2004 Yukon XL Denali. The front air works great as I just had it fixed. The rear still blows warm air with rear ac on high. Not operator error. Checked and double checked settings. Wondered if maybe vent door not opening or something. Any help would be appreciated. Thanks in advance.
#712 of 779
Re: NAV /DVD [cann1] by bandaidgooz
May 25, 2009 (6:07 pm)
Reply

Replying to: cann1 (May 24, 2009 1:01 pm)

The noise you're hearing is probably from the front differential. I drove mine about 50,000 miles before I got worried it would finally break at about 100,000 miles. The repair was expensive. I think they said it was the pinion gears.
#713 of 779
Re: [fitterswife] by farmerjim
May 26, 2009 (12:56 pm)
Reply

Replying to: fitterswife (Oct 10, 2008 8:12 am)

i have the same problem and was wondering if you had ever figured it out
#714 of 779
re: GMC Denali Traction Active problem [jdlsierra] by alanddrake
Jun 09, 2009 (10:31 pm)
Reply

Replying to: jdlsierra (Mar 25, 2009 12:30 pm)

I JUST FOUND YOUR MESSAGE - WILL TAKE BACK & ASK DEALER TOMORROW - WENT YESTERDAY & THEY TOLD ME IT WAS STEERING SENSOR - $250 LATER - ASKED WIFE HOW IT DROVE ON WAY HOME ? SHE SAID IT DID THE SAME THING - WHAT THE HECK ! WILL GET BACK & LET YOU KNOW OUTCOME - THANKS !
#715 of 779
roughd1 by roughd1
Jun 20, 2009 (8:43 am)
Reply
I have a 2004 Denali XL with 110,000 miles. The vehicle is a beast, I towed my 2nd vehicle a 1999 Town and Country from the mid-west to the east coast thru the mountains with absolutely no problems at all(the 6.0L is a monster). The following is what I had to have repaired while it was still under warranty, the driver seat motor(replaced), DVD player(replaced), steering gear(replaced) at about 20,000 miles and now once again when making left turns the steering gear squeals and there is a vibration in the steering wheel. Overall I am happy with the truck, but need advice on the steering gear. The thing is a 04 and is still turning heads around town.
#716 of 779
Yukon wet front floor. by narmer2000
Jun 30, 2009 (10:47 am)
Reply
Went to vacuum carpet in Yukon last night and found drivers side floor soaking wet. I lifted up the carpet to dry out and seen a plug missing from floor so Im hoping this is the culprit. Read somewhere there are drain holes that plug up. Does anyone know where they are?

Messages Page 72 of 79
1
...
69
70
71
72
73
74
75
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement