You are here:
Forums
SUVs
GMC Yukon
GMC Yukon and Yukon Denali Problems

779 messages, Last post on Oct 31, 2009 at 6:36 AM
You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester
|
Replying to: siennac70 (May 02, 2004 12:58 pm) |
|
| Hi! Love my truck but just ran into a problem today. I have electric running boards. I left the lights on this afternoon and drained the battery. When I got things going again, the running boards do not operate. (In fact the the passenger side runnig board is stuck in the extended position and the driver's side running board is in the retracted position). The fuse is okay yet the button on the center consloe doesn't do anything. Any ideas?? | |
Have a new 2008 Denali w/the 20 inch wheels. As soon I got on the highway noticed a vibration in the steering wheel starting at 55 and getting worse as speed increased. Especially annoying after 65mph. Steering wheel shakes and passengers can feel it. Had 2 front wheels balanced but did not fix the issue. Then had all 4 tires balanced an again did not fix the issue. Now have 2000 miles and am ready to take to dealer but am not looking forward to it. Any idea what may be causing this? Bad rotors, bad shocks, suspension, etc. Is it a known problem that others are having? Any info would help me so when I do take it to dealer I can speak intelligently!
|
|
Have a new 2008 Denali with 20 inch rims. On the door jam, it says to inflate tires to 32 psi for this size. On tires it says 40psi. Which is correct. I was told 40 psi so the tires wouldn't cup. Am confused. Wondering if over inflating by 8 psi per tire can cause tire vibration.
|
|
|
|
|
Replying to: jallard (Jul 09, 2008 7:16 pm) |
|
|
Replying to: jallard (Jul 09, 2008 7:16 pm) |
|
|
Replying to: kendog2 (May 14, 2008 10:57 am) |
|
|
Replying to: 3babies (Oct 02, 2006 4:29 pm)
|
|
|
My Denali is a 1999 with a 5.7 liter, and 120,000 miles. The intake manifold gasket (LOWER) I check oil level 3 times a week, but it does not show level increasing. The GM dealer has provide a quote to fix lower intake gasket, but also mentioned valve cover gaskets, in checking with GM parts department, they show bolts to intake manifold can be reached without taking off valve covers. My questions are: Can intake manifold be taken of without removing valve covers? Should I have any concerns due to age 10 years, that other parts, will be broken or damaged, with this service job. There sure is a lot of hoses and tubes, in the way of intake access. Thanks in advance for all replys. The Denali is due to go in for this service on Monday Aug 11/08, so a quick reply would ba appriecated |
|
|
Replying to: jallard (Jul 09, 2008 7:16 pm) |
|
You are here:
Forums
SUVs
GMC Yukon
GMC Yukon and Yukon Denali Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2000 GMC Yukon Denali



Browse by Board
Browse by Topic
Today's Chats