You are here: Forums SUVs GMC Yukon GMC Yukon and Yukon Denali Problems

GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV

Messages Page 64 of 79 1 ... 61 62 63 64 65 66 67 ... 79 Prev Next Last

Go To Msg # Search This Discussion

#627 of 779 Popping in steering column by ma2sk Apr 16, 2008 (11:57 am)
I have a 2004 Yukon and for a couple of years now there has been a loud popping somewhere in the steering column. It has became louder and worse over the past couple of years. Of course this problem didn't pop up until my warranty expired. I took it to a local mechanic who couldn't figure out what the problem was. Has anyone else had this problem? If so, did they find out what was causing and how to fix it? I sure could use all the help I can get.   I am also having problems with the air conditioner. For no reason at all it will start blowing hot hot air. It will be working fine one moment and then poof the hot air comes. I live in Texas so we use our air conditioners a lot! Replies to this message: rsht (Apr 16, 2008 1:57 pm) capnjak (Apr 26, 2008 6:03 am) roughd1 (Aug 08, 2009 2:11 pm)
#628 of 779 Re: Popping in steering column [ma2sk] by rsht Apr 16, 2008 (1:57 pm)
Replying to: ma2sk (Apr 16, 2008 11:57 am) I think the loud popping sound has to do with the Intermediate Shaft (or I-Shaft), it can be heard as well as felt (if I am not mistaken) in the steering wheel and/or the steering column area. Hope I am still on track to what you have experienced so far. If yes, you may verify and consider the possibility of replacing the Upper I-Shaft Assembly (Bulletin #00-02-35-003M), where I recall quite a few GM vehicles were affected in addition to those I can recall below: 2000-2006 GMC Yukon, Yukon XL Models 2003-2006 HUMMER H2 The replacement I-Shaft Part Number is: 19153614   Make sure that is indeed the problem, and Good Luck!
#630 of 779 Re: Popping in steering column [ma2sk] by capnjak Apr 26, 2008 (6:03 am)
Replying to: ma2sk (Apr 16, 2008 11:57 am) Hello all. This is my first post to this site, so hopefully it will be helpful. I own a 2001 yukon xl denali that I bought in feb of 08. Everything worked except a/c. I was told it was too cold to check but it did work. Last week with the warmer weather I tried a/c. Just blows warm air. Checked everything( even all the answers in this site. ) Tried disconnecting battery, all fuses etc. My mechanic checked freon - full. no leaks. He figured it must be compressor. Anyway,long story short, it wasn't the compressor, it was the belt and tensioner. Seams that the tensioner got stuck and wouldn't engage the compressor. My $1400 repair turned into $200. Maybe this isn't your issue, but have a look at the a/c tensioner and belt.
#631 of 779 Re: 2007 Yukon Keyless Entry [andrewv] by kendog2 May 14, 2008 (10:57 am)
Replying to: andrewv (Nov 02, 2006 9:03 am) Yes I have I recently purchased the 2007 yukon denali 6.2liter and the keyless sometimes unlocks the rear doors and most of the time it dont. I cant figure it out. It will always unlock the front two but sometimes not the rear ones. ????? If you do please let me know. Replies to this message: rsht (May 15, 2008 3:57 am) tharealest (Jul 06, 2008 8:34 pm) aramco (Jul 14, 2008 1:50 am)
#632 of 779 Re: 2007 Yukon Keyless Entry [kendog2] by rsht May 15, 2008 (3:57 am)
Replying to: kendog2 (May 14, 2008 10:57 am) Checkout Message #499 from "greggboston" in this discussion, if you have not already.. Not sure what is "doc 1861180" though... perhaps take that information to your dealership for help.
#633 of 779 2005 Yukon Denali XL Lift Gate Problem by domsdenali May 17, 2008 (10:29 am)
Has anyone had this problem with their liftgates. I can lock the doors with the remote or from the inside of the truck but the Lift Gate and the Lift Window will not lock. Can anyone help. Replies to this message: kmbaron (Mar 24, 2009 6:17 pm)
#634 of 779 Re: 01 Denali XL Loud Knocking when Turning [thatworks] by harleyg Jun 26, 2008 (6:23 pm)
Replying to: thatworks (Apr 15, 2008 10:41 am) Have you found out what your problem is with the popping and knocking on the frontend of the Denali XL? I have an 02 with the same problem, have replaced both cv axles and wheel bearings, all differental fluids transfercase fluids still knocks and pops when turning right or left after 5-10 miles. Replies to this message: 67gtgirl (Jul 14, 2009 1:56 pm)
#635 of 779 2003 Yukon Denali Rear Brakes Keep Dying after 4-5 months by umoms Jun 28, 2008 (9:58 am)
I have a 2003 GMC Yukon Denali with 95k miles and for the past 2-3 years I have had to replace the rear pads and rotors several times, they last 4-5 months each time.... The front ones are fine... I tried several different aftermarket. What could be causing them to go bad so quick all the time? Replies to this message: rsht (Jun 28, 2008 2:04 pm)
#636 of 779 Weak brakes on 2008 Yukon XL Denali by skytop1 Jun 28, 2008 (2:03 pm)
Anyone have any good advice for better brake pads for my 2008 Yukon XL Denali? Braking can be best described as weak. I will be towing a 3000# boat in about 3 weeks on vacation and I want to upgrade to better pads with better grip so I can stop this sloppy driving SUV before plowing into the car in front of me. Thanks.

Messages Page 64 of 79 1 ... 61 62 63 64 65 66 67 ... 79 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon and Yukon Denali Problems