Sign In Join 



GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV


Messages Page 64 of 79
1
...
61
62
63
64
65
66
67
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion

#623 of 779
Re: engine problems? [jj_hanebuth] by jasonmace
Apr 10, 2008 (1:02 pm)
Reply

Replying to: jj_hanebuth (Jan 26, 2008 4:51 pm)

I had the same problem on my 2005 yukon denali. It turned out to be the seal between the transmission and transfer case. I didn't notice a leak either but every time I get a oil change I have them top of the fluids.
#624 of 779
Re: GMC headache [gmclady] by fastdog1
Apr 11, 2008 (5:14 am)
Reply

Replying to: gmclady (Nov 30, 2007 6:35 am)

As far as your mirrors go, they probably disconnected the battery while working on it and you need to go into the driver information center and reselect the mirror tilt-down option.
#625 of 779
Re: 01 Denali XL Loud Knocking when Turning [havanajoe] by thatworks
Apr 15, 2008 (10:41 am)
Reply

Replying to: havanajoe (May 02, 2007 9:49 am)

Did you ever figure out what the knocking noise was? Mine does the exact same thing. after about 20-30 minutes of driving it sounds like it is binding up when I turn and loud knocking with a funky grabbing then letting go feeling. HELP.
#626 of 779
Re: grinding,rubbing noise while turning [rhonda2] by thatworks
Apr 15, 2008 (10:52 am)
Reply

Replying to: rhonda2 (Jul 02, 2005 10:04 pm)

Hey there, my Denali has started making the same noises you described only after driving awhile (20-30min) did you ever find out what was wrong?
 
Thanks!
#627 of 779
Popping in steering column by ma2sk
Apr 16, 2008 (11:57 am)
Reply
I have a 2004 Yukon and for a couple of years now there has been a loud popping somewhere in the steering column. It has became louder and worse over the past couple of years. Of course this problem didn't pop up until my warranty expired. I took it to a local mechanic who couldn't figure out what the problem was. Has anyone else had this problem? If so, did they find out what was causing and how to fix it? I sure could use all the help I can get.
 
I am also having problems with the air conditioner. For no reason at all it will start blowing hot hot air. It will be working fine one moment and then poof the hot air comes. I live in Texas so we use our air conditioners a lot!
#628 of 779
Re: Popping in steering column [ma2sk] by rsht
Apr 16, 2008 (1:57 pm)
Reply

Replying to: ma2sk (Apr 16, 2008 11:57 am)

I think the loud popping sound has to do with the Intermediate Shaft (or I-Shaft), it can be heard as well as felt (if I am not mistaken) in the steering wheel and/or the steering column area. Hope I am still on track to what you have experienced so far. If yes, you may verify and consider the possibility of replacing the Upper I-Shaft Assembly (Bulletin #00-02-35-003M), where I recall quite a few GM vehicles were affected in addition to those I can recall below:
2000-2006 GMC Yukon, Yukon XL Models
2003-2006 HUMMER H2
The replacement I-Shaft Part Number is: 19153614
 
Make sure that is indeed the problem, and Good Luck!
#630 of 779
Re: Popping in steering column [ma2sk] by capnjak
Apr 26, 2008 (6:03 am)
Reply

Replying to: ma2sk (Apr 16, 2008 11:57 am)

Hello all. This is my first post to this site, so hopefully it will be helpful. I own a 2001 yukon xl denali that I bought in feb of 08. Everything worked except a/c. I was told it was too cold to check but it did work. Last week with the warmer weather I tried a/c. Just blows warm air. Checked everything( even all the answers in this site. ) Tried disconnecting battery, all fuses etc. My mechanic checked freon - full. no leaks. He figured it must be compressor. Anyway,long story short, it wasn't the compressor, it was the belt and tensioner. Seams that the tensioner got stuck and wouldn't engage the compressor. My $1400 repair turned into $200. Maybe this isn't your issue, but have a look at the a/c tensioner and belt.
#631 of 779
Re: 2007 Yukon Keyless Entry [andrewv] by kendog2
May 14, 2008 (10:57 am)
Reply

Replying to: andrewv (Nov 02, 2006 9:03 am)

Yes I have I recently purchased the 2007 yukon denali 6.2liter and the keyless sometimes unlocks the rear doors and most of the time it dont. I cant figure it out. It will always unlock the front two but sometimes not the rear ones. ????? If you do please let me know.
#632 of 779
Re: 2007 Yukon Keyless Entry [kendog2] by rsht
May 15, 2008 (3:57 am)
Reply

Replying to: kendog2 (May 14, 2008 10:57 am)

Checkout Message #499 from "greggboston" in this discussion, if you have not already.. Not sure what is "doc 1861180" though... perhaps take that information to your dealership for help.

Messages Page 64 of 79
1
...
61
62
63
64
65
66
67
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement