Sign In Join 



GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV


Messages Page 57 of 79
1
...
54
55
56
57
58
59
60
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion

#552 of 779
07 Denali paint chipping by wkav
Apr 18, 2007 (5:56 am)
Reply
I have had my red Denali for 3 weeks now. I have only 2000 miles on it and the paint is now chipping off. I have 8 areas on the vehicle...one on the hood (which I can understand), 3 on the driver quarter panel, 2 on the driver quarter panel and 2 on the rear driver quarter panel. There is also evidence of dirt UNDER the paint. I am assuming this will be chipping off too! We have went to the dealer and also contacted GM service dept. They suggest we go back to the dealer and let them break the factory paint and have a new paint job! The dealer noted to us that the dealership paint is not baked on like the factory and wouldn't suggest it. GM informed us that once the car leaves the factory it is no longer their problem!!!! I have had over 12 different GM vehicles and never had a paint problem.
Has anyone else had paint issues with their Yukon?
Thanks! wkav
#553 of 779
Re: 07 Denali paint chipping [wkav] by kimdvm1
Apr 22, 2007 (7:10 am)
Reply

Replying to: wkav (Apr 18, 2007 5:56 am)

I can't imagine that GM won't take care of this; you might just want to continue researching and decide the best way to handle it befor you press them.
 
I had a peeling paint problem with my 1991 Chevy S10 that showed up several years after I bought it... GM admitted a problem with that paint color of that year and they paid for a complete repainting.
 
However, because it wasn't safety, it wasn't an advertised recall. I had to go to the dealer and then call GM (the dealer first said "not covered", GM then tried for only a partial repaint, but finally a got a better dealer behind me who got authorization for a full repaint). I was pretty happy with this as that vehicle was already out-of-warranty.
#554 of 779
Re: 07 Denali paint chipping [kimdvm1] by anderjma
Apr 24, 2007 (6:39 pm)
Reply

Replying to: kimdvm1 (Apr 22, 2007 7:10 am)

I have a 2004 GMC Sierra Extended Cab Pickup Birch in colour and the paint is starting to look like it has dirt specks under it. They weren't there a month ago and are starting to appear randomly all over the vehicle.
 
They eventually break through in a small star shape and start to rust.
 
The dealer I took it to told me it looked like paint pop and called in the GM rep to review it.
 
The rep denied any claim since the vehicle is out of warranty 84,000 km and I am left with the prospect of paying $2500 for a complete paint strip and redo.
 
This will be my last GMC after over 20 years of GMC ownership. It is no wonder GMC is being overtaken by Toyota with their bad quality and poor customer warranty for a problem that is obviously caused by a poor factory paint system.
#555 of 779
Re: GMC "Professional Garbage" not "Pro Grade" [ewaldman] by fcbuilder
Apr 26, 2007 (3:54 pm)
Reply

Replying to: ewaldman (Apr 11, 2007 6:46 am)

I had the same problem today . I am driving along the highway and here a loud noise like there were rocks in the engine and all the warning lights were on and the engine lost its power and died on me . they towed it ti the dealer and told me the same thing that mly engine block was cracked , meaning the engine was blown and that they are going to replace it with a brand new engine from the factory. I hope this solves what ever problem there having.
#556 of 779
Re: 07 Denali paint chipping [wkav] by meandjaedyn
Apr 28, 2007 (12:07 am)
Reply

Replying to: wkav (Apr 18, 2007 5:56 am)

Absolutely. The driver quarter panel is chipping on my truck. I didn't get too excited though because my truck is a 2000 Denali and I just figured it was getting old. It isn't chipping anywhere else, yet, though. People keep telling me to paint the entire truck but I am not about to do that. I am planning to get an estimate for just the door - I have put more than enough money in that truck. I have replaced 3 fuel pumps on that truck and my mechanic has told me that the Yukons are notorious for fuel pump problems, so beware!!
#557 of 779
Re: 99 yukon denali tail light problems [tommy00] by lbooth
Apr 28, 2007 (5:30 am)
Reply

Replying to: tommy00 (Feb 20, 2006 2:27 pm)

Did you ever resolve this issue ? I have the exact problem and they are telling me I need a new signal switch.
 
Lee
#558 of 779
Re: grinding,rubbing noise while turning [rhonda2] by havanajoe
May 02, 2007 (9:40 am)
Reply

Replying to: rhonda2 (Jul 02, 2005 10:04 pm)

Hello, i know this has been a while, Did you ever get this fixed or find out the cause?
#559 of 779
01 Denali XL Loud Knocking when Turning by havanajoe
May 02, 2007 (9:49 am)
Reply
I have a 2001 Yukon Denali and it only happens after I have driven it for a while and it does it when I turn right or left. It almost sounds like the whole front of the car is coming off. Anyone have any ideas as to what it is and/or how to fix it?
 
While I am here, the rear passenger window seems to roll all the way down on it's on, very randomly. When I have the child window locks on, it doesn't happen. And if it does roll down, I have to have the lock on in order to roll it back up from the driver control.
 
Also, the driver heated seat warmer doesnt seem to work. Front passenger works fine and so do both rear seats
#560 of 779
Re: grinding,rubbing noise while turning [havanajoe] by iipacfan
May 03, 2007 (6:04 pm)
Reply

Replying to: havanajoe (May 02, 2007 9:40 am)

hello, i just had mine fixed for the same problem, but my 02 denali only did it when turning left and when i toogled the steering wheel from left to right, there would be like a rubbing noise. I first had them put in a new steering shaft(which per gmc, was a bulletin on this part) but that did not fix the problem, finally i took it to chevy and they changed the power steering gear box and so far, after 1 month, i have not heard the noise. you might want to have the dealer check that out. it corrected my problem. so far ...(knock on wood))
#561 of 779
Amazing by obyone
May 04, 2007 (12:58 pm)
Reply
that a Chevy dealer could solve the problem and not the GMC dealer. What made you take your Denali to a Chevy dealer?

Messages Page 57 of 79
1
...
54
55
56
57
58
59
60
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement