You are here: Forums SUVs GMC Yukon GMC Yukon and Yukon Denali Problems

GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV

Messages Page 55 of 79 1 ... 52 53 54 55 56 57 58 ... 79 Prev Next Last

Go To Msg # Search This Discussion

#537 of 779 Re: Shocks for 2001 Yukon XL [bkcrna1] by rsht Feb 16, 2007 (1:38 pm)
Replying to: bkcrna1 (Feb 13, 2007 8:22 pm) Disregard my previous post, as they only have those for manual adjust not the Autoride system... Sorry! I wonder if standard air shocks can be used as a replacement... i.e. http://www.shockwarehouse.com/site/mon_air.cfm
#538 of 779 Re: Shocks for 2001 Yukon XL [bkcrna1] by obyone Feb 16, 2007 (4:59 pm)
Replying to: bkcrna1 (Feb 13, 2007 8:22 pm) Try here for the front/rear shocks.   http://www.gmpartsdirect.com/   Found the rear shocks listing for $250.00 plus shipping. Fronts are also available. Once you have the parts, you can take them to a local shadetree mechanic or change them yourself. At $2300 the dealer was on the high side.   Good luck!!
#539 of 779 Can't change address in navigation system while moving by kgillis Feb 17, 2007 (12:15 pm)
I have an 05 Denali XL. When I am moving I cannot enter an address. Is there any override for this problem? The address feature locks you out while the vehicle is moving and if for example I want to find a convenience store I need to pull over to enter a search. GM told me this was a safety feature. Every other nav system I have had didn't lock me out while driving. What a pain. Replies to this message: lobsenza (Feb 18, 2007 3:03 pm)
#540 of 779 Re: Can't change address in navigation system while moving [kgillis] by lobsenza Feb 18, 2007 (3:03 pm)
Replying to: kgillis (Feb 17, 2007 12:15 pm) That is getting more common. I have a Lincoln LS that does the same thing.   I saw a device (I don't remember where) that can circumvent that safety feature on GM vehicles. I wish I could find one that would work on Ford.
#541 of 779 Re: Peeling console denali [sher920] by jacyndaearl Feb 20, 2007 (11:10 am)
Replying to: sher920 (Feb 03, 2007 8:40 pm) Yeah, I got my replaced under warranty, but it has done the same exact thing. It looks terrible. They said they would only replace it once. Why GM places such cheap parts in their vehicles I'll never know. I do love my denali, but not the stupid little problems it has. Replies to this message: brewboy (Mar 09, 2007 3:09 pm) lobsenza (Mar 12, 2007 7:03 pm) pamster1 (Nov 16, 2007 9:56 am) and 1 more...
#542 of 779 2007 Yukon Denali XL by hbatten Mar 08, 2007 (3:44 pm)
Since we bought the car in January it has been in the service dept. four times. It idles very low to the point it seems like it almost wants to die. Also, it seems to lose power when driving because it is trying to decide which gear it want to stay in. Now my dash board lights will turn off and on again periodically, they flach once. Anyone else having similar issues? The service dept. cannot find anything wrong because there is "no warning light" on. Give me a break. All this software has the mechanics with their hands tied. It is driving me crazy! I jsut want to drive a new car and have it run like a new car! Replies to this message: obyone (Mar 08, 2007 8:29 pm) jacque383 (Mar 14, 2007 8:43 pm)
#543 of 779 Re: 2007 Yukon Denali XL [hbatten] by obyone Mar 08, 2007 (8:29 pm)
Replying to: hbatten (Mar 08, 2007 3:44 pm) Have you considered giving another dealer a chance?   Try contacting GMC customer service, they may be able to refer you to one.
#544 of 779 Re: Peeling console denali [jacyndaearl] by brewboy Mar 09, 2007 (3:09 pm)
Replying to: jacyndaearl (Feb 20, 2007 11:10 am) I have a 2004 Denali, I complained about the matte finish around the console cracking and peeling. They said GM has a kit for it to be replaced so I said go ahead. Came back and they had covered the console with a trim kit made up of the plastic fake carbon wood grain. Doesnt look to bad, at least it matches the rest of the grey wood grain. Replies to this message: lobsenza (Mar 12, 2007 7:03 pm) pamster1 (Nov 16, 2007 9:56 am) smithsonga (Nov 20, 2007 6:11 am)
#545 of 779 Re: Peeling console denali [brewboy] by lobsenza Mar 12, 2007 (7:03 pm)
Replying to: brewboy (Mar 09, 2007 3:09 pm) Do you have any information on the part number for the kit? Would it be possible to post pictures? If you can't post them, please send them to DenaliAncoAuto.com.   Thanks. Replies to this message: pamster1 (Nov 16, 2007 9:56 am) smithsonga (Nov 20, 2007 6:11 am)
#546 of 779 Re: 2007 Yukon Denali XL [hbatten] by jacque383 Mar 14, 2007 (8:43 pm)
Replying to: hbatten (Mar 08, 2007 3:44 pm) Yes...this happened to my 07 Denali...Except on the 3rd time, this loud clanging noise happened. Each time it would happen more and more seemed to slowly go wrong. Had it towed into the dealership on the 3rd attempt because it just wouldn't even start.   They called me 2 days later to tell me that the piston actually broke inside the engine.   I called GM to request a Lemon buy-back and they've refused. Instead they ordered a new engine to be placed into my car.   I've cleaned out my car and have refused to pick it up. Been to an attorney and now were sueing GM as well as the dealership.   The car has been in the shop for 18 days now and who knows how much longer before they try to get me to come in and pick it up. That won't happen until we see what happens in court.   My engine in the Denali is now being shipped back to the factory so that the engineers can look at it and see if there is a design flaw.   I'll never buy a GM again.

Messages Page 55 of 79 1 ... 52 53 54 55 56 57 58 ... 79 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon and Yukon Denali Problems