You are here:
Forums
SUVs
GMC Yukon
GMC Yukon and Yukon Denali Problems

779 messages, Last post on Oct 31, 2009 at 6:36 AM
You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester
|
|
|---|---|
Is it true on the 07 Denali that you can not use the Nav system and the rear DVD at the same time???
|
|
|
Replying to: david4266 (Oct 23, 2006 7:51 pm) I don't have any noise that I consider "gear" noise, but I do get some resonance coming from the exhaust. I will comment that I previously had an '05 Denali XL, and the '07 even with 22" wheels, rides smoother, and handles more like a smaller vehicle, and not the "Cow on Rollerskates" feel of the previous generation. Dave |
|
|
Has anyone had trouble with their keyless entry for the new Yukon. the remote works well when we first exit the vehicle, but after about 30 minutes the remote no longer works. I use the key to open the door and then the remote works again. This happens all the time. Thanks in advance for any help. Andrew |
|
|
|
|
Replying to: rotti92201 (Oct 27, 2006 5:11 pm) -- Gregg Boston, Mass |
|
|
|
|
Replying to: andrewv (Nov 02, 2006 9:03 am) -- Gregg Boston, Mass
|
|
|
Replying to: greggboston (Nov 05, 2006 2:35 pm) --Angel Menlo Park, CA
|
|
|
|
|
Replying to: 3pigologs (Nov 16, 2006 8:56 am) Here is the info they wrote up: "Tech confirmed failure key fobs using recommendation doc 1861180 put system to sleep removed rcdlr reinstalled fuse retested all OK" Since they did this fix a couple of months ago everything has worked fine. Hopefully your dealer can find out what that document says. Good luck, let us know how things work out. -- Gregg Boston, Mass
|
|
|
I have a 2001 Yukon XL 4wd w/ a 3.73 rear end. The rear end has some noise and the dealer told me it's likely the ring and pinion gear needs replacing. The car goes into the dealer this week. Since the rear end needs to be rebuilt could I switch to a 4.10 rear end? Would I have to do something to the front end differential since it's a 4wd? thanks in advance for any advice |
|
|
Replying to: reeftankguy (Aug 21, 2005 6:22 am) I was curious to know the details about the replacing of the solenoid and what it entailed since I seem to be in the same boat. I am not brave enough to venture into a tranny blind, so I was going to AAMCO tomorrow. Any guidance would be greatly appreciated. |
|
Did anyone else get a letter from On Star saying that they will no longer be providing service to older vehicles because the On Star system in running on an anolog system???
|
|
You are here:
Forums
SUVs
GMC Yukon
GMC Yukon and Yukon Denali Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2000 GMC Yukon Denali



Browse by Board
Browse by Topic