Sign In Join 



GMC Yukon and Yukon Denali Problems

779 messages,  Last post on Oct 31, 2009 at 6:36 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, SUV


Messages Page 50 of 79
1
...
47
48
49
50
51
52
53
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion

#485 of 779
perryd1 by perryd1
Sep 21, 2006 (7:59 am)
Reply
have a 99 also - same problem. Intermittently the radio, wipers, and windows cut out. Get this - if i slam the center console lid most of the time all systems cone back to life.
  
Spoke to several dealers and no common fuse, relay, circuit breaker exisits and no connection in the console area is common - according to them.
  
Everything is stock. Have you had any luck.
#486 of 779
Headlamp Problems by 3babies
Oct 02, 2006 (4:29 pm)
Reply
I have a 2001 Denali and my lowbeams do not work. My highbeams work, my fog lamps work and my parking lights work, but I have no lowbeams. I've checked all of my fuses and they seem to be fine. Also tried to replace bulbs but to no avail. Used a meter to make sure there was voltage coming from the connection. It's all good.
Also the lights on my steering column (volume controls for radio) are out. And my 3rd brake light.
Has anyone else had this problem?
#487 of 779
Re: went to dealer for surging/bouncing idle with ac on [2002gmcdenali] by bct
Oct 02, 2006 (6:30 pm)
Reply

Replying to: 2002gmcdenali (Jun 23, 2005 11:18 am)

It is possible That you had a carbon deposit in your intake plenum, it is the part between the throttle body and the block/heads. If it where blocking a passage it would have created the problem you are describing. Not sure on the warranty end of that. Your lucky it wasn't the EGR valve that clogged and they wanted to charge you for. A buddy of mine worked at a dealership and he would replace the whole part even though all you have to do is take it out and knock the carbon out of the valve seat.
#488 of 779
Re: RPM issues w/2003 Yukon XL [keisha40] by bct
Oct 02, 2006 (6:35 pm)
Reply

Replying to: keisha40 (Aug 15, 2006 7:07 am)

Not sure of that particular motor but most newer cars with a tach run off a cam sensor to measure the motors RPM. It is a little device that runs off a magnetic pick up. That is most likely the prob.
#489 of 779
2003 GMC Yukon Denali by kmeyers
Oct 03, 2006 (6:08 pm)
Reply
I'm wondering if anyone has had problems with the two rear doors and hatch not locking. I have tried both manually locking from front doors as well as pushing the remote. The two front doors lock but when I go to open the two back doors and hatch, they do not lock and the alarm system goes off. Any ideas or suggestions?
#490 of 779
Re: Whistling while I drive [boogga] by josie16
Oct 11, 2006 (7:31 am)
Reply

Replying to: boogga (May 12, 2004 5:25 pm)

Boogga, did your dealer ever get this issue fixed? Some people say the TXV replacement (Document ID #594045) does it and others say it's a normal whistle noise related to the unused IAC passage in the throttle body (Document ID #1580607).
 
My 2004 Yukon Denali makes the exact same noise and it drives me crazy!
 
Thanks!!
#491 of 779
Re: Low Idle '02 Denali [cdog51] by carhobby
Oct 13, 2006 (4:36 pm)
Reply

Replying to: cdog51 (Aug 06, 2006 5:26 pm)

It does work. I wish I had done it before having the fuel pressure regulator replaced in a failed attempt to solve the problem. It has been good for about a year so far.
#492 of 779
2007 Denali Gear Noise by david4266
Oct 23, 2006 (7:51 pm)
Reply
I used to be the happy owner of a 2005 Yukon XL that rode good, was quiet and a pleasure to drive. I traded it for a 2007 Denali and what a disappointment. At 38 mph plus there is gear noise. If you let off the gas or take it out of gear it stops. I only have 700 miles on it and the noise has been there after about 100 miles. It is loud enough to hear inside the cabin. The dealer says this is a normal noise in the AWD Denali. I drove several other Denali's and they all had the noise, mine was louder. Has anyone experienced this and if so did you get it fixed. This issue is driving me nuts.

Messages Page 50 of 79
1
...
47
48
49
50
51
52
53
...
79
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement