You are here:
Forums
Sedans
Chevrolet Cobalt
Chevrolet Cobalt

2171 messages, Last post on Nov 23, 2009 at 6:04 PM
You are in the Chevrolet Cobalt Forum. Your Hosts are pat & karens
|
Replying to: snappy3 (Aug 06, 2009 12:28 pm) |
|
For the last few days when I get in my car in the morning or the afternoon, the radio automatically will start flipping through a couple of stations on its own. For example; if I am listening to XM 8 it will go to XM 7 or 6. It does te same thing in CD mode too. The tracks start changing and so on. It seems to happen when I touch the volume control, and or go over a bump. I drove over to the dealership this afternoon, but by the time I got there it had stopped. Very hard to duplicate. Of course dealer says "well come in when it is doing it". This is not the first time for this problem, and I am afraid that after the warranty runs out I will be stuck with a bad radio. Any suggestions would be helpful. My car is a 2007 Cobalt LTZ with the CD changer.
|
|
|
|
|
Replying to: bporter1 (Aug 07, 2009 8:31 pm) |
|
|
|
| Going in tomorrow for my second steering column in 6,000 miles on the 09 Cobalt coupe.. If something rattles up front when you are on a washboard surface you might as well take it in. Something to do with the electric steering. Has anyone else had this problem? It seems to be common out here in New Mexico. | |
|
I will be dropping my car off this week overnight at my local dealership to see if they can duplicate the radio problem. I told them it seems to happen in the morning when it is a little cold, and sometimes it happens when it gets hot. My warranty runs out very soon. I really hope that tey can find the problem. To me it seems like a loose connection in a jack plug or something. Anyway I will keep everyone posted. |
|
| Left the car at the dealership, but of course they could not duplicate the problem. The service advisor I did talk to said "that they will order me a new radio anyway". So far the old radio is working fine. I will keep the updates coming. | |
|
|
| hello i went to get my car inspected and i cant get it done because the codes on the car and got them pulled and the codes are P0030,P0036,P0102,P0135,P0141,P0443 and i went to the dealer and asked them and they told me to change some parts which was the Evap Purge Valve and the O2 sensors 1 & 2 and the MAF and the Gas Cap. But the car is still coming up as the P0102 and the P0443 and there Pending codes and i need to find out how to get the Engine light off for good and not come on no more any one help that knows about the Emissions on the Cobalts. Mine is a 2005 Chevy Cobalt (2 Door) | |
|
|
I have an 09 LT1 coupe with the ebony cloth interior and 8,000 miles on the car. I bought it in September 2008. The left side of the driver's seat -the left bolster and the left side of the middle section (where your back would be) are pilling and showing wear. This is amazing for car upholstery. I've had Buicks with velour seats that ran 100,000 miles or more and were 10 years old with no detectible wear on the driver seat. I don't wear sandpaper pants. Does anyone else have this problem? I'll probably have to get leather from now on.
|
|
|
Replying to: dispencer2 (Nov 16, 2009 7:04 am)
|
|
You are here:
Forums
Sedans
Chevrolet Cobalt
Chevrolet Cobalt
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Cobalt



Browse by Board
Browse by Topic
Today's Chats