You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Maintenance & Repair Chrysler Pacifica: Problems & Solutions 

Chrysler Pacifica: Problems & Solutions - READ ONLY

2119 messages,  Last post on Oct 12, 2006 at 4:26 PM

You are in the Chrysler Pacifica Maintenance & Repair Forum. Your Host is kcram

What is this discussion about? Chrysler Pacifica, Wagon

Messages Page 4 of 212 1 2 3 4 5 6 7 ... 212 Prev Next Last

Go To Msg # Search This Discussion

#30 of 2119 Keys ... by cluelesspa Jul 07, 2003 (4:51 pm)
well I want a key that will start the car but wont get into my glove box...
#31 of 2119 rubber trim above rear door by cluelesspa Jul 07, 2003 (4:55 pm)
anyone notice a small rubber strip above the rear door opening (looks like it keeps water from running down off the roof onto you when open.   mine is coming off (looks like double sided sticky tape is all they used to keep this thing on)
#32 of 2119 rubber trim (cluelesspa) by rickstrat Jul 08, 2003 (7:06 am)
Ours was too. Dealership ordered a new one and stuck it on for free. If you have 3M double sticky tape, it will work fine also if you don't want to make another trip to the dealership. BTW, our trailer hitch looked really nice after it was installed (they are ordering a new lower bumper cover as they scratched it as well). We tried it out this weekend with a bike carier (Thule) and it performed really well.
#33 of 2119 tow hitch by cluelesspa Jul 08, 2003 (1:51 pm)
you would think that they will learn from this and go the way of others and provide a bumper already cut out for the trailer hitch. which wiring harness did you get? do you have pics of the hitch with the wiring harness mounted?   I ordered the 7 wire round as I can get a converter to 4 wire flat if needed but dont think you can go from 4 wire to 7 wire.
#34 of 2119 re: tow hitch by rickstrat Jul 09, 2003 (3:46 am)
I didn't get the wiring harness as this hitch (for now) will be used for a bike carrier. Looked like the wiring harness was almost $100 from the dealership. I remember when a few well placed splices would do the trick. I did like how the wiring harness mount is tucked up underneath the bumper to prevent damage though. As for the scuff, that was actually the short end of the story. Appearantly, a lot attendant locked our $100 key inside the vehicle. Instead of calling us to get the spare, he used a coat hanger to try to get in. He was successful, eventually, after scratching up most of the driver's and passenger's side interior door trim. Dealership was very apologetic and is fixing everything today and have waved the installation charges for the tow hitch. Cost them over $1,000 in parts (scratched driver's window) including a new interior door panel which cost $800 alone! Makes those $100 keys seem pretty cheep! Lesson to all - don't use a coat hanger to get into a locked car!
#35 of 2119 rickstrat by cluelesspa Jul 09, 2003 (4:22 pm)
ouch just reading your story makes me cringe ... best wishes that it comes out as good as new. Well they should give you a loaner at least with the new coverage...   what do you mean its tucked up under the bumper for the wiring harness. I have yet to see one installed.
#36 of 2119 Weird grinding noise at 40mph by mrus1 Jul 15, 2003 (8:52 am)
I bought my FWD Pacifica 2 weeks ago. This past week it started making a grinding noise at 35 - 40 mph that lets up after you have been driving for about an hour. I took it to the dealer Saturday, 35 minutes away and of course it wasn't doing it when I went there. They checked it over and couldn't find anything and thought the brakes were just wearing in. Has anyone else heard this noise??? Replies to this message: scooter15 (Oct 04, 2005 4:04 pm)
#37 of 2119 Navigation question by pssimon Jul 16, 2003 (4:21 am)
If you look at page 12 of the documentation for the Navigation system, you will see a graphic that shows a split screen display. On the left side, it shows the "big picture" as to where you are along your path to your destination. On the right side, it shows the turn you should make as you get to it.   I can't find how to make my display go into the split screen mode. Does anyone have a clue how to do this? When I give it a destination, I just get a display that shows the upcoming turn, even if that turn is 20 miles away! That isn't very valuable if you are trying to plot your progress.   All help appreciated.
#38 of 2119 RE: Navigation question by kalathiparambi Jul 16, 2003 (5:43 am)
I agree the split screen mode gives you a better picture of the destination. To switch to split screen go to System Settings/Guidance and choose Both (both Arrow & Map screens).
#39 of 2119 RE: RE: Navigation Question by pssimon Jul 16, 2003 (2:22 pm)
Thanks... that was exactly what I was looking for!

Messages Page 4 of 212 1 2 3 4 5 6 7 ... 212 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Maintenance & Repair Chrysler Pacifica: Problems & Solutions