You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Accessories & Modifications

Chrysler Pacifica Accessories & Modifications

835 messages,  Last post on Aug 18, 2009 at 10:15 AM

You are in the Chrysler Pacifica Forum. Your Host is kcram

What is this discussion about? Chrysler Pacifica, Wagon

Messages Page 84 of 84 1 ... 78 79 80 81 82 83 84 Prev Next Last

Go To Msg # Search This Discussion

#831 of 835 Re: looking for help on new purchase and mods [turboed331] by blade1022 Mar 20, 2009 (4:10 am)
Replying to: turboed331 (Mar 19, 2009 7:23 am) I have seen countless pacificas come in with 22" rims that need entire suspension replacement. It wouldn't hurt if the rim was a lightweight design but 40lb rims would kill the mercedes suspension within a year. As far as performance there aren't many companies out there that make bigger brakes or body kits or even engine performance parts for any motor offered other than the 3.5L that is offered in every year in both front and rear wheel drive. The later year productions were offered with a 6 speed automatic that delivers ample acceleration in all motors offered but the 4.0L engine probly produces the most power. Good Luck with your project, you don't really see any customized pacifica's outside of a couple of cromed out wannabe mirror balls, it would be nice to see one done the right way.
#832 of 835 Re: Trailer Hitch Issues/Spare Tire [Kelmey] by duddly101 Jun 30, 2009 (9:26 am)
Replying to: Kelmey (Jan 06, 2009 8:10 pm) I have purchased and installed the same Curt Hitch, and was annoyed like you all the spare tire didnt fit back in readily. I believe if I did not have the dual exhaust, the hitch would have fit normally. My only work around was to deflate the spare, and use a jack to squeeze/push the spare past the hitch. A trade off, but hate to not have a spare available. When researching hitches I found many styles out there for the Pacifica. But went with the Curt because of the additional 2 mounting points near the receiver area for more stability.
#833 of 835 Installing aftermarket screen in 2007 Pacifica by mkeenum Aug 02, 2009 (12:38 pm)
So I've got the infamous 2007 Pacifica with a 6-disk DVD changer and no screens. I've got some experience installing aftermarket parts in cars, but I would like some information on how to get started. I want dual headrest monitors, but I don't have a wiring diagram. Anyone got a "How To" link? Thanks for any information you can send my way.   You can email me at Matt_Keenum Hotmail.com Replies to this message: froggie03 (Aug 07, 2009 7:34 am) helpdvdquest1 (Aug 18, 2009 10:15 am)
#834 of 835 Re: Installing aftermarket screen in 2007 Pacifica [mkeenum] by froggie03 Aug 07, 2009 (7:34 am)
Replying to: mkeenum (Aug 02, 2009 12:38 pm) Did you ever find a wiring diagram, or any information? I just bough a 2006 pacifica and have the same problem? Replies to this message: helpdvdquest1 (Aug 18, 2009 10:15 am)
#835 of 835 Re: Installing aftermarket screen in 2007 Pacifica [froggie03] by helpdvdquest1 Aug 18, 2009 (10:15 am)
Replying to: froggie03 (Aug 07, 2009 7:34 am) Has anyone every responded to the million dollar question?   Pacifica 06 has dvd changer but no screen. I found this link http://starparts.chrysler.com/info/default/k6858779.pdf that shows how to do it with the factory dvd, which I have, but where do you get the wiring? how much is the wiring? I need all the installation kit I guess. Does anyone know where to get it?   I called chrysler parts and they are either not sold or very expensive.   If there's another screen I can get that is cheap and easy to install and works with the factory dvd changer, please someone share...   Thanks!!

Messages Page 84 of 84 1 ... 78 79 80 81 82 83 84 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Accessories & Modifications