You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Accessories & Modifications

Chrysler Pacifica Accessories & Modifications

835 messages,  Last post on Aug 18, 2009 at 10:15 AM

You are in the Chrysler Pacifica Forum. Your Host is kcram

What is this discussion about? Chrysler Pacifica, Wagon

Messages Page 5 of 84 1 2 3 4 5 6 7 8 ... 84 Prev Next Last

Go To Msg # Search This Discussion

#41 of 835 pacificaoregon by KarenS HOST Jul 08, 2003 (11:41 am)
RE: posting photos   Check under "Posting a Message into a Discussion" in the Town Hall Help It will tell you how to post a photo there. If you need more assistance, please let me know!
#42 of 835 mudflaps by cluelesspa Jul 08, 2003 (1:42 pm)
yes they are Mopar from the dealer (got it part of my purchase package) dealer cost and paid the dealer price for labor ...   there are two different types one for front and one for rear. Maxmom... guess I am glad the dealer put in the mudflaps. the only thing I am installing is the wheel locks   on your scuff guard is it flush all the way around the lip (I am flush on both ends but have a extremely slight gap in the center section.)   oh the mudflaps come in two colors both don't match the vehicle bottom so best to ask to see both next to your vehicle. one is gray and the other is black.   oh and posting pics very easy if you have them some place viewable via the inter net just use this format in your text : img src="http://url-location-of-photo"> and put < before the IMG ... so that it's boxed in side of < and > ....
#43 of 835 License plate by maxmom Jul 19, 2003 (6:25 am)
Okay, I'm going to ask it. What have you guys done about your license plate? I was amazed when my dealer only put two screws in my license plate, then I realized there are only two holes.   Went to the auto parts store and purchased a cover assembly. It looks better, but still has the two bottom holes and the whole thing makes a clanging noise when I close the liftgate.   Is there a OEM holder for the Pacifica? If so, I'm assuming it has 3M tape on the back to hold it down??   I'm tired of the clanging noise and my husband says it's the only thing about the car, wagon, sports tourer, SUV, etc. that seems cheap.   Any help?
#44 of 835 license plate by cluelesspa Jul 19, 2003 (6:03 pm)
I wouldn't put the 3M on both the plate and the car. I would find some foam or rubber pads with sticky on one side and stick that to the back of your licence plate. that way if it deteroriates it wont be stuck to your Pacifica ... a thick enough pad should be enough to keep it from clanging around... WalMart has those pads for Chairs that may work (probably need to use some good strength super glue to keep it on the plate though   My Highlander was the same with only two bolt holes but they had pads that were on the bottom section of the door as well which padded the plate from hitting the door.
#45 of 835 clueless . . . by maxmom Jul 19, 2003 (7:14 pm)
what are you using? Do you not have this same problem?
#46 of 835 license plate by ms_mayor Jul 19, 2003 (7:34 pm)
Gosh, I gotta tell you...I never even realized there were only two screws holding the plate on up top. I've never heard the clanging noise you describe, maxmom, and my hatch is opened at least twice a day transferring my son's hockey gear in and out of the back.   I'll have to listen more closely to see if its happening.
#47 of 835 ms mayor by maxmom Jul 20, 2003 (3:47 am)
Is your license plate in a holder of some type or just attached by the two top screws?
#48 of 835 My plate holder by ms_mayor Jul 20, 2003 (5:58 am)
The dealer put the plate in a frame, but its still only attached by two screws at the top. I think the frame is only made of plastic.
#49 of 835 ms mayor ... by cluelesspa Jul 21, 2003 (5:17 am)
I had them transfer my clear cover (get them at WalMart) from Highlander over (I hate advertising for dealers for free = licence plates with dealer names) Plus technically they are illegal in somestates (hehe) for anything that covers up your license plate)   I also made sure they didnt stick any of their dealer logos on my car. looks cleaner with out a dealer name on the back ... I dont have the problem of it clanging but I do have the powerhatch closure so I never slam the hatch. I press it down until the automatic system grabs and latches it so probably that is why I dont have the rattling licence plate issue.
#50 of 835 Thanks, clueless. . . by maxmom Jul 21, 2003 (5:31 am)
That explains the difference. I don't have the power liftgate (which doesn't bother me), but that's why you and ms mayor aren't noticing the noise.   We're headed to Chicago for vacation, but when we return I'm going to the dealer to see what their solution would be. I need to get them to install my splash guards. I just haven't had the time.   Thanks again.

Messages Page 5 of 84 1 2 3 4 5 6 7 8 ... 84 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Wagons Chrysler Pacifica Chrysler Pacifica Accessories & Modifications