You are here: Forums SUVs Toyota 4Runner Toyota 4Runner Accessories

Toyota 4Runner Accessories

659 messages,  Last post on Dec 13, 2008 at 11:05 PM

You are in the Toyota 4Runner Forum. Your Hosts are steve_ & tidester

What is this discussion about? Toyota 4Runner, Performance Mods

Messages Page 52 of 66 1 ... 49 50 51 52 53 54 55 ... 66 Prev Next Last

Go To Msg # Search This Discussion

#509 of 659 RE: PIctures of bumper guards by lukeg by alfster1 Jun 03, 2004 (4:10 am)
Thanks for posting the pics...Very nice
#510 of 659 mrwhipple by lukeg Jun 06, 2004 (8:07 pm)
Takes four bolts to hold each bumper guard. All bolts are provided by Waag. Bolts screw in to existing holes in the frame. Took me 30 minutes to install front and back, as I did it by myself. If you can have someone to hold the bumper guard while putting the bolts in, you can finish the whole project in 10 minutes. No special tools are necessary, just a wrench. Replies to this message: mgabel2 (Jun 07, 2004 3:29 pm)
#511 of 659 JAOS Center Protector & Taillight covers by nick4597 Jun 07, 2004 (9:40 am)
I was planning on purchasing a stainless JAOS center protector and a pair or stainless Manik taillight covers. I have minimal mechanical experience (changing the oil is as far as I go). Would you guys recommend professional installation or is it simple enough to install. From what I understand the center protector just bolts onto existing holes, making installation simple. I don't know about the taillight covers though, in my Durango they had to drill some holes. Any info would be much appreciated. Also, ANY MEMBER PICS OF A JAOS PROTECTOR INSTALLED? If i go ahead with it i'll defenitley post some pics for all to see. THANKS!
#512 of 659 Re: mrwhipple [lukeg #510] by mgabel2 Jun 07, 2004 (3:29 pm)
Replying to: lukeg (Jun 06, 2004 8:07 pm) I heard those bumper guards fool the air bag sensors, so that the bags don't inflate when they are supposed to - either too soon, too late, or, even, when they are not supposed to. True?
#513 of 659 by steve_ HOST Jun 07, 2004 (3:54 pm)
In Australia, "bullbars or roobars may only be fitted to a vehicle with airbags if the bar has been certified by the vehicle's manufacturer as being safe for that vehicle." link   Steve, Host
#514 of 659 lukeg by mrwhipple Jun 07, 2004 (9:27 pm)
thanks for the info. sounds easy enough.   do you know what they weigh, by any chance?
#515 of 659 Shifter Knob by nick4597 Jun 09, 2004 (5:38 pm)
Anyone replace their shifter know on their newer model 4runner. I see some sites that have replacement shifters specifically for 03-04 model years, but don't see how one would remove the existing one.
#516 of 659 mrwhipple by lukeg Jun 09, 2004 (8:21 pm)
around 30 lbs for the front and 20 lbs for the rear.
#517 of 659 lukeg by mrwhipple Jun 09, 2004 (10:27 pm)
thanks for the info on that.
#518 of 659 nick4597 by mrwhipple Jun 09, 2004 (10:29 pm)
the shifter knob just unscrews right off.

Messages Page 52 of 66 1 ... 49 50 51 52 53 54 55 ... 66 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Toyota 4Runner Toyota 4Runner Accessories