You are here: Forums SUVs Toyota 4Runner Toyota 4Runner Accessories

Toyota 4Runner Accessories

659 messages,  Last post on Dec 13, 2008 at 11:05 PM

You are in the Toyota 4Runner Forum. Your Hosts are steve_ & tidester

What is this discussion about? Toyota 4Runner, Performance Mods

Messages Page 52 of 67 1 ... 49 50 51 52 53 54 55 ... 67 Prev Next Last

Go To Msg # Search This Discussion

#505 of 659 Re: Homelink installation details [corancher #504] by my2cents May 11, 2004 (2:50 pm)
Replying to: corancher (May 11, 2004 2:16 pm) Couldn't have described it any better then that. It's probably one of the easiest and most convenient modifications you can do since you use it everyday. I would recommend it to everyone out there that is thinking about getting it.
#506 of 659 Bumper Guards by nick4597 May 30, 2004 (8:18 am)
I HIGHLY recommend getting some sort of guard for the front bumper. I rolled into someone's rear end in a parking lot (woops!)... was barely going a mile or two and received a 4" crack on the front bumper next to the foglamps. Sure enough, her Cavalier was damage-free. I am looking to get one now, but I can never find pictures of newer model 4runners equipped w/ em, not sure how it would look
#507 of 659 PIctures of bumper guards by lukeg Jun 02, 2004 (7:57 pm)
Here it is a link to bumper guards on my 04 4runner. Fully recommend some. Already saved my bumper once. My are manufactured by WAAG company and I think are the best. Installation takes 30 minutes for the front and back. http://f1.pg.photos.yahoo.com/ph/lukeg37211/album?.dir=/Yahoo!+Ph- - oto+Album&.src=ph&store=&prodid=&.done=http%3a//p- - hotos.yahoo.com/lukeg37211 Replies to this message: cub2000 (Jul 28, 2005 9:53 am)
#508 of 659 lukeg by mrwhipple Jun 02, 2004 (10:44 pm)
did you need any special tools to put those on?   how many bolts hold each one on underneath?   they look good.
#509 of 659 RE: PIctures of bumper guards by lukeg by alfster1 Jun 03, 2004 (4:10 am)
Thanks for posting the pics...Very nice
#510 of 659 mrwhipple by lukeg Jun 06, 2004 (8:07 pm)
Takes four bolts to hold each bumper guard. All bolts are provided by Waag. Bolts screw in to existing holes in the frame. Took me 30 minutes to install front and back, as I did it by myself. If you can have someone to hold the bumper guard while putting the bolts in, you can finish the whole project in 10 minutes. No special tools are necessary, just a wrench. Replies to this message: mgabel2 (Jun 07, 2004 3:29 pm)
#511 of 659 JAOS Center Protector & Taillight covers by nick4597 Jun 07, 2004 (9:40 am)
I was planning on purchasing a stainless JAOS center protector and a pair or stainless Manik taillight covers. I have minimal mechanical experience (changing the oil is as far as I go). Would you guys recommend professional installation or is it simple enough to install. From what I understand the center protector just bolts onto existing holes, making installation simple. I don't know about the taillight covers though, in my Durango they had to drill some holes. Any info would be much appreciated. Also, ANY MEMBER PICS OF A JAOS PROTECTOR INSTALLED? If i go ahead with it i'll defenitley post some pics for all to see. THANKS!
#512 of 659 Re: mrwhipple [lukeg #510] by mgabel2 Jun 07, 2004 (3:29 pm)
Replying to: lukeg (Jun 06, 2004 8:07 pm) I heard those bumper guards fool the air bag sensors, so that the bags don't inflate when they are supposed to - either too soon, too late, or, even, when they are not supposed to. True?
#513 of 659 by steve_ HOST Jun 07, 2004 (3:54 pm)
In Australia, "bullbars or roobars may only be fitted to a vehicle with airbags if the bar has been certified by the vehicle's manufacturer as being safe for that vehicle." link   Steve, Host
#514 of 659 lukeg by mrwhipple Jun 07, 2004 (9:27 pm)
thanks for the info. sounds easy enough.   do you know what they weigh, by any chance?

Messages Page 52 of 67 1 ... 49 50 51 52 53 54 55 ... 67 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Toyota 4Runner Toyota 4Runner Accessories