Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Ford Fusion/Mercury Milan Ford Fusion/Mercury Milan
5511 messages, Last post on Nov 11, 2009 at 9:26 AM
You are in the Ford Fusion/Mercury Milan Forum. Your Hosts are pat & karens
| Spam, spam, spam, spam........... | |
It attracts the spam-flies.  Please keep the comments focused on Fusion/Milan. Thanks! |
|
|
|
|
I test drove a Fusion last night and was very impressed in many aspects of the car. However, the auto trans on the I4 was not one of them. Now, part of that is that I am coming out of a V6/5MT car and I have never owned an automatic. However, I felt there were several places where the car was slow to re-accelerate after slowing because it didn't downshift appropriately (or at least, where I would have already down shifted). The dealer didn't have an MT version on the lot, but I'm going to check with another local dealer to see if they have one. Anyway, if anyone has an I4/MT could you tell me how you like it? How it compares to other MT cars you've driven? I'm shopping for my next car and the other two cars at the top of my list at the moment are VW Jetta and Mazda 3. |
|
|
Replying to: texasnightowl (Sep 24, 2009 7:07 am) If you want an automatic to downshift you have to give it more throttle - probably more than you're used to doing with a manual. The throttle is the only way for the tranny to figure out what to do.
|
|
|
|
|
Replying to: texasnightowl (Sep 24, 2009 7:07 am) i have 18k on my fusion 6/AT. when i first got it, the transmission was very 'geary' sounding in the 2 lower gears and the engine sounded rough. eventually, i would say between 10-15k, the engine and trans both quieted down/smoothed out. unless i push it, the only sound i get out of the engine is a low level 'vvvvvv'. |
|
|
|
|
Replying to: akirby (Sep 24, 2009 10:01 am)
|
|
|
Replying to: texasnightowl (Sep 25, 2009 1:51 pm) |
|
|
|
|
Replying to: texasnightowl (Sep 25, 2009 1:51 pm) I went from a 4 cyl manual (Contour) to a 4 cyl automatic ('07 Mazda6) a couple years ago. I've found the transmission's operation to be pretty acceptable. The only negatives I notice are more vibration when stopped, a bit of slush when initially starting from a stop, and early up-shifting a bit early under light acceleration. I do like that under hard acceleration my Mazda trans shifts at redline, I guess some do not do that and have revs limited to something less than redline. My wife has a Jetta and that is a super-smooth shifting transmission. The 2.5, 5 cyl engine also has more low end torque than my 4 cyl. |
|
|
|
|
I am looking at a 2010 3.0 fusion and was wondering what gas mileage people are seeing with the v6's, awd or fwd. Are you seeing numbers that are better or worse than what is on the sticker? Also, does anyone know where the transmissions are being built or by whom? Thanks
|
|
|
Replying to: noneneeded (Oct 01, 2009 6:01 am) I have a 2006 3.0L and I get around 27 mpg on highway trips. City mileage on my daily commute averages anywhere from 17 to 21 depending on traffic.
|
|
You are here:
Forums
Sedans Ford Fusion/Mercury Milan Ford Fusion/Mercury Milan
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Mercury Milan
2010 Ford Fusion
Browse by Board
Browse by Topic
Today's Chats
