Jeep Liberty Diesel

Replying to: Eastcoastz (Jan 16, 2009 8:17 am)

In your service manual, belts are to be inspected for cracks or signs of wear. Ours are changed by default.
Your timing belts should be changed at 100,000 miles; ours at 60,000!
The problem is: the vehicle is the same
 
When all these 'worst case conditions' are put together, the vehicle becomes excessively expensive and Jeep sales suffer from such policy.

Replies to this message:
• farout (Jan 17, 2009 11:24 am)
  • caribou1 (Jan 17, 2009 12:47 pm)

Replying to: caribou1 (Jan 17, 2009 1:11 am)

Replies to this message:
• caribou1 (Jan 17, 2009 12:47 pm)

Replying to: farout (Jan 17, 2009 11:24 am)

Hi farout,
Yes, the VM 2.8 CRD is still alive
http://www.jeep.fr/cherokee/jeep-cherokee-tarifs.html
 
It's the only engine offered, and I will not change mine for this newer model.
 
I do my maintenance (engine oil + air filter) every 20,000 miles and I check the axles and transfer case oil level every 4 years. My fuel filter cartridge is good for 30,000 miles, and that's it
 
I've had this Jeep 5 1/2 years and my only regret comes from the business attitude of Chrysler who imposes to sell everything at the price level of a Mercedes. This kills the American car spirit after a while.

Replying to: caribou1 (Jan 09, 2009 11:46 am)

Replies to this message:
• caribou1 (Jan 19, 2009 1:30 am)
  • kntrygurl (Jan 22, 2009 2:56 pm)
    • CRD_Bullydog (Jan 23, 2009 1:08 pm)
    • caribou1 (Jan 25, 2009 9:02 am)

Replying to: lightnin3 (Jan 18, 2009 7:37 pm)

Hi lightnin,
A small proportion of gasoline helps diesel fuel 'filtration' at lower temperatures. It gives mobility to the paraffin (wax) contained in the fuel, in other words the paraffin does not rapidly turn into solid wax and block the flow of fuel. If you put too much gasoline the fuel will self ignite and you're in real trouble especially when you have an automatic
I used 'White Spirit', an oily paint thinner that comes out of the refining process well before diesel fuel. It's close to Kerosene that we have in our winterized fuel.
 
I have no experience with alcohol based additives.
I just read a local article saying methanol will catch water stagnating in your diesel fuel tank and make it a combustible solution. The amount of water you can mix/catch with a quart of pure methanol corresponds to 12-15 fluid oz. This suits the common rail technology assuming every filter and water separator is in good working order. We should not go beyond this volume.
If you use a quart of 'burning alcohol', you can only absorb 3-5 fluid oz of water. In this case you are putting water in the tank

Replies to this message:
• kntrygurl (Jan 22, 2009 2:56 pm)
  • CRD_Bullydog (Jan 23, 2009 1:08 pm)
  • caribou1 (Jan 25, 2009 9:02 am)

Replying to: storageguy (Jan 16, 2009 9:06 am)

Replies to this message:
• nicku812 (Jan 21, 2009 9:32 am)
  • drudgery (Jan 21, 2009 3:32 pm)
    • caribou1 (Jan 22, 2009 1:29 am)

Replying to: jek443 (Jan 16, 2009 10:31 am)

Replies to this message:
• jek443 (Jan 20, 2009 12:28 pm)
  • drudgery (Jan 20, 2009 1:08 pm)
• nicku812 (Jan 25, 2009 8:26 pm)

Replying to: drudgery (Jan 20, 2009 11:56 am)

Replies to this message:
• drudgery (Jan 20, 2009 1:08 pm)

Replying to: jek443 (Jan 20, 2009 12:28 pm)

Replying to: drudgery (Jan 20, 2009 11:48 am)

Replies to this message:
• drudgery (Jan 21, 2009 3:32 pm)
  • caribou1 (Jan 22, 2009 1:29 am)