Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Jeep Liberty and Jeep Liberty Diesel Jeep Liberty Diesel
10698 messages, Last post on Nov 30, 2009 at 5:16 PM
You are in the Jeep Liberty and Jeep Liberty Diesel Forum. Your Hosts are steve_ & tidester
|
Replying to: nescosmo (Sep 22, 2008 1:43 pm) I have always put in six full quarts and twelve ounces from another and have never seen the engine overfilled. The level on the dipstick is always between the "MIN" and "MAX'. As to the CCVC, I believe it did fail. I have been driving for the past day or so with the oil filler cap loose and no oil has appeared around the CCVC. As to adding a Provent device, maybe later on. First I need to have the trans evaluated to see what is going on in there. One question; is the CCVC available as an aftermarket part or is it still a dealer only part? |
|
|
Replying to: winter2 (Sep 20, 2008 5:08 pm) Nescosmo....
|
|
|
Replying to: nescosmo (Sep 22, 2008 9:48 pm)
|
|
|
The dealer called me today and told me of two issues. 1. The oil leak was caused by a blown rear main seal. How the oil got on the top of the engine I will never know. It leaked around the CCVC. 2. Torque converter is toast and probably the front pump too. Had the F37 done in December of 2006. They replaced the TC at that time. I am going to speak with the tech tomorrow PM. and see what else he has to say. I would like to retain that nice firm shift if possible. |
|
|
Replying to: winter2 (Sep 23, 2008 4:15 pm) Could you try to explain what "toast" means? Is it excessive wear of the clutch plates or destruction of the central element within the TC? You had given the name of a company proposing a reinforced component that could handle the extra torque. Even if you change this component, the lockup clutch plates remain the same  I have to admit, 5 years ago my local Jeep tech understood well the latent problem of automatic shifting under high torque.
|
|
|
Replying to: winter2 (Sep 23, 2008 4:18 am)
|
|
|
Replying to: caribou1 (Sep 24, 2008 12:25 am) Nescosmo....
|
|
|
Replying to: nescosmo (Sep 24, 2008 10:15 pm)  The torque converter unit and the set of clutches are two distinct parts of the transmission. The first can typically become out of balance after overheating and the second should trigger a high oil temperature warning signal before the gearbox gets damaged. |
|
|
Replying to: winter2 (Sep 23, 2008 4:15 pm) Are you going with stock parts or aftermarket?
|
|
|
Replying to: mdamick (Sep 25, 2008 9:27 am) As to parts, I am doing this under warranty (stock parts). Before the year is over, the trans gets the transgo kit. If the TC fails again, then I will put a Suncoast or other high performance part in. |
|
You are here:
Forums
SUVs Jeep Liberty and Jeep Liberty Diesel Jeep Liberty Diesel
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Jeep Liberty
Browse by Board
Browse by Topic
Today's Chats
