You are here: Forums Sedans Mazda6 Mazda6 Accessories and Modifications

Mazda6 Accessories and Modifications

353 messages,  Last post on Sep 13, 2009 at 2:02 PM

You are in the Mazda6 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda MAZDA6, Sedan

Messages Page 34 of 37 1 ... 31 32 33 34 35 36 37 Prev Next Last

Go To Msg # Search This Discussion

#322 of 353 Re: Best cold air intake to intstall....Brand..cheapest...ect [jcotyj] by zzzoom6 Jan 03, 2008 (10:30 pm)
Replying to: jcotyj (Jan 02, 2008 9:14 am) there is a mazdaspeed CAI, but it's essentially a rebadged AEM model. the mazdaspeed one is warranty friendly, but the model made by CPE seems to get the most power and causes the least amount of cel's. it also costs the most... bang for your buck though, the mazdaspeed is a good deal for around 250-ish which I've seen on some mazda6 websites.
#323 of 353 Re: Just bought a 2005 6 GT [scottmsimpson] by zzzoom6 Jan 03, 2008 (10:42 pm)
Replying to: scottmsimpson (Apr 21, 2007 4:49 pm) I also saw a brochure about a device or something that allows ipod's and such to input into the stereo. Anyone done either of these upgrades?   I installed what is called an "auxmod" about 6 months ago (around $50) and it works great. The installation could be pretty intimidating for a newbie, but there are websites that will show you pictures of what to do step by step. Anyway, I printed all the pages and went to work and found it was really very easy. Just a little time consuming since I didn't want to make any mistakes...   But now I have an input in the center console and in the center glove box (the one above the stereo) since I used a splitter. I use one for when I use my gps w/ mp3 capability - nice since the music mutes when voice commands are given from the gps unit and the voices come out my car speakers so it's easier to hear. But the gps unit I have is really a crappy mp3 player, so the center console input is great for when I want to use my better mp3 player.   Basically, you have to remove a few parts from the interior (cup holder, shift console, glove box screw (hard to explain w/ out pics), and the stereo/ hvac faceplate). It took me a couple hours to do after reading the how-to's.
#324 of 353 mazda6 radio by todogg9 Jan 17, 2008 (6:49 pm)
I have a Mazda 6 2004. The battery was disconneted and now my radio beeps every time I change the station. Does anyone know the button sequence to turn th beep off? Replies to this message: mz6greyghost (Jan 18, 2008 4:39 am) todogg9 (Jan 18, 2008 12:04 pm)
#325 of 353 Re: mazda6 radio [todogg9] by mz6greyghost Jan 18, 2008 (4:39 am)
Replying to: todogg9 (Jan 17, 2008 6:49 pm) To turn off the beep do the following:   1. Turn off the radio 2. Press and hold the "seek"-down button 3. Press and hold the "5" button until a beep confirms the setting   The beep should be gone for all radio controls but not for the climate controls. Replies to this message: todogg9 (Jan 18, 2008 12:04 pm)
#326 of 353 Re: mazda6 radio [mz6greyghost] by todogg9 Jan 18, 2008 (12:04 pm)
Replying to: mz6greyghost (Jan 18, 2008 4:39 am) Thank You that worked !
#328 of 353 19"s by seanakio Mar 24, 2008 (8:30 am)
Does anyone have 19"s on there m6. If so how is the ride and was there and mods to get them on? Replies to this message: dateacha (Mar 26, 2008 12:35 pm) zzzoom6 (Apr 26, 2008 6:56 am)
#329 of 353 Re: 19"s [seanakio] by dateacha Mar 26, 2008 (12:35 pm)
Replying to: seanakio (Mar 24, 2008 8:30 am) I don't have them, but I would think 19s would be almost guaranteed to give you a harsher ride. Around here, the short sidewalls would mean bent rims in short order -- it's pothole season.   Does anyone know of a source for the little clip-on parts that fit on the back of the headlights? The white plastic piece that allows you to use a phillips screwdriver to adjust the lights is what I'm talking about. I just had my lights replaced at dealer cost since the dust/moisture cover sockets were damaged, and even the new lights come with only one of these little angle drives. The lights will accept 3 more on each side and having them would make adjusting the lights almost easy. The dealer says they are not available as a part, the junkyards around here don't have any, and neither do the body shops. Apparently all the 6 drivers are being good and not wrecking their cars.
#330 of 353 I love my 18" by chikoo Mar 27, 2008 (1:08 pm)
I love my 18" 48 offset with 235 tire width. looks perfect on the car. in fact it can stand it's own against a merc parked next to it with those wheels.
#331 of 353 Re: 19"s [seanakio] by zzzoom6 Apr 26, 2008 (6:56 am)
Replying to: seanakio (Mar 24, 2008 8:30 am) there are some guys who have switched to 19's on mazda6club ... you may want to check out their comments over there. look for the wheels/ tires section and you should find some answers there. but be ready to roll your fenders!

Messages Page 34 of 37 1 ... 31 32 33 34 35 36 37 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Mazda6 Mazda6 Accessories and Modifications