You are here:
Forums
Maintenance & Repair
Maintenance & Repair - Archived Discussions
GMC Wiper Motor ![]()

18 messages, Last post on Mar 12, 2003 at 12:03 PM
You are in the Maintenance & Repair - Archived Discussions Forum. Your Host is mr_shiftright
This discussion is ARCHIVED. To reactivate the discussion, post a request in the Lost? Ask the M&R Host for directions! discussion.
|
|
|---|---|
| What does this sorry state of affairs say about Envoy and GM? | |
| It says what we long-time GM buyers have always known, GM's strength is in manufacturing, not engineering, so it takes them 2-3 yrs. to get things right on a new model. | |
|
|
| And I also, USED TO BE a "...long-time GM buyer..." The GM purchases I made in 1997 convinced me to look elsewhere, and I took my own advice. I have become far more open to multiple brands with a far more open mind on the matter. In fact, I remain open to GM if they ever get back over the River Styx. (:o] | |
| A lot of the gremlins can be traced to components made by suppliers. Two-thirds of my DC van was made by suppliers, and that includes some of the best components, made by Bendix and Johnson Controls! Bet your wiper motor was not made by GM! | |
|
|
| I hope you weren't using that as an excuse for GM, because it surely won't suffice! This maelstrom has been boiling for years. In my opinion, Chevrolet is the anchor of the problem. | |
| No, not an excuse, but something to keep in mind if you have to pay for replacement part. In my case, I purchased a rebuilt alternator from a regional supplier with a good reputation, with a 2 yr. warranty, rather than going back to the dealer and getting another OEM part. | |
|
|
| Regardless of the brand of vehicle, I also look for viable alternatives for repair parts other than the (typically) very expensive OEM stuff. | |
| Unfortunately, the controller for the GM wipers, that so often fails because of the solder joints, is a dealer item only. It is not offered in the aftermarket. | |
|
|
| When my wiper motor in my 1986 Olds Custom Cruiser burned out very early, I replaced it with a unit from an automotive junk yard. It went the distance for me. When only OEM is available, used parts are often the best buy. | |
| I got one for my friend for his S-10 from Auto Zone. It was the complete aftermarket unit motor and all. The controller is not available separate. The new one did not have Delphi on the case like the original one did, but we did not open it up to check the board. The motor costs around $75. It really is a shame that the motor outlasts the controller, it used to be the other way around. | |
You are here:
Forums
Maintenance & Repair
Maintenance & Repair - Archived Discussions
GMC Wiper Motor ![]()
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 GMC Yukon XL



Browse by Board
Browse by Topic
Today's Chats