You are here: Forums Pickups Toyota Tacoma Toyota Tacoma (2004 and earlier)

Toyota Tacoma (2004 and earlier)

539 messages,  Last post on Nov 30, 2009 at 9:33 AM

You are in the Toyota Tacoma Forum. Your Host is kcram

What is this discussion about? Toyota Tacoma, Truck

Messages Page 50 of 55 1 ... 47 48 49 50 51 52 53 ... 55 Prev Next Last

Go To Msg # Search This Discussion

#487 of 539 squeaky cluth by taco98 Sep 25, 2007 (6:59 pm)
i have a 98 tacoma trd. The clutch seems to squeak mostly when it is colder weather outside. I have no idea what weather could have to do with it but I have tried spraying anti squeak stuff on there and nothing seems to help. does anybody have an answer??
#488 of 539 Squeaky Clutch by mysport Sep 28, 2007 (4:12 am)
My '02 Tacoma squeaked as well. Good news is that it didn't effect operation of the clutch or pose a safety hazzard. Bad news is that the bushing around the clutch/pedal needs to be replaced. Cost is about $300. I decided to put up with the intermittent squeak - have it sprayed from time to time. Maybe if I win the lottery I'll get 'her fixed lol.
#489 of 539 need a little info by sndman2k Oct 14, 2007 (11:43 am)
I have the chance to buy a 98 Tacoma that has spun a bearing on a main. Three questions, first does anyone know where I can get either a short block or bottom end rebuild kit. Second Maybe a used engine. Third would it take alot to upgrade it to the v6, it's the 2.7 and a 5spd. would it take alot to change it( bell housing bolt pattern, size, mounts....). Any help would be appreciated... Thanks
#490 of 539 2003 tranny whine by jackoski Oct 22, 2007 (11:15 am)
at between 55 and 60 mph my 2003 tacoma V6 4x4, 5 speed gives a high pitch wine in 5th gear. Is this normal or is a bearing going? also with the ABS when I brake my foor is hitting the gas pedal. Brakes were bled and plenty of fluid and brake pads.
#491 of 539 interested in 02-03 taco by mdawg25 Oct 24, 2007 (4:24 pm)
I've been conidering buying a taco v6 4Wd for awhile now. I'm looking at anywhere between an 01 and 04. Ive been looking at this discussion and the frame problems scared me.Has anyone with an 02 or 03 had this problem? Thanks
#492 of 539 Frame rust issues.... by dasman12 Oct 24, 2007 (6:56 pm)
I've heard the frame design changed somewhere in the 200X timeframe. You might want to ask a service dept about it.   My 98 was one of the rusted out ones.... welded it up with 1/4 inch steel plating.
#493 of 539 Re: Hi, I'm a newbee [swlago] by dion1 Nov 07, 2007 (10:34 am)
Replying to: swlago (Mar 20, 2006 11:32 am) You can buy anything other than Hunter grill guards. They are junk. They vibrate a lot when you drive. I got their guard last year and it rusts badly just after a few months. They do not honor their warranty and ignored my calls. I do not recommand anyone buying Hunter Truck products.
#495 of 539 Re: Tires [jdm5] by patusaf Jan 07, 2008 (6:25 pm)
Replying to: jdm5 (Apr 12, 2007 1:58 pm) Try turning your rotors. I have a 2003 double cab 4x4 with a similiar problem. I bought new OEM pads and turned both front rotors. Fixed the problem and it stops like new.
#496 of 539 Re: moparbad.... [smgilles] by madmike5 Jan 24, 2008 (8:16 am)
Replying to: smgilles (Oct 18, 2002 12:56 pm) Trade it! I have a 2003 Tacoma TRD pak 4x4 That sound like it 20 years old springs squeaking like it has 300000 miles.Dealer has no answers,dash also squeaking,also getting a value stem if it sits for a day get small puff of smoke when cold starting. purchased this truck new a thought i was buying a reliable truck . I will never buy a toyota. Stick with GMAC NEVER A HAD ANY PROBLEMS. Replies to this message: jazzbeau (Jan 25, 2008 11:46 am) tmiller159 (Jan 25, 2008 7:01 pm)

Messages Page 50 of 55 1 ... 47 48 49 50 51 52 53 ... 55 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Toyota Tacoma Toyota Tacoma (2004 and earlier)