Sign In Join


Toyota Tacoma (2004 and earlier)

531 messages,  Last post on Jun 13, 2009 at 5:22 PM

You are in the Toyota Tacoma Forum. Your Host is kcram

What is this discussion about? Toyota Tacoma, Truck


Messages Page 22 of 53
1
...
19
20
21
22
23
24
25
...
53
Prev
Next
Last
Go To Msg #
Search This Discussion

#211 of 531
Thanks everyone..beach driving by emt
Jan 22, 2004 (7:42 am)
Reply
Thanks to everyone who responded to my request about beach driving. I just thought while I am there, I might as well have some more fun in the sand. Jeff(indacurl2k), I will be doing my beach driving on Hateras Island, in the area south of Salvo. I will keep my cell phone and tow truck service number handy! Hopefully I will not need it. Take care everyone
 
Joe
#213 of 531
Re: '04 Tacoma V6 valve noise by nomorevw1
Jan 23, 2004 (6:34 pm)
Reply
I also have a 2004 Tacoma V6, in my case a Prerunner Xtracab with an automatic. I've got about 1000 miles on it. I've noticed a lot of engine noise when accelerating with the engine cold. I don't know if it's the same thing that you're hearing. It sounds like valve lifters or something, its very loud, and I'm guessing that it's normal. The noise is still there when the engine warms up, but it's not as loud. More bothersome to me is a subtle engine vibration that seems to occur when the engine is running at about 2000 rpm, about 50-60 mph. This is also much more noticeable when the engine is cold, but it happens all the time. I noticed the other day that if I rev the engine up to about 2000 to 2500 rpm and hold it steady, with the truck in neutral, I can feel the vibration fade in and out. I've seen reviews that describe how smooth the V6 in the Tacoma is, but the engine in mine seems to be anything but smooth. If what I have is normal, this is the noisiest, roughest V6 I've ever driven. For the most part, I really like the truck, but between the engine noise, vibrations, and 14.5 mpg I'm getting so far, I'm not sure I can live with it for very long.
#214 of 531
Re: '04 Tacoma V6 valve noise by apicalsys
Jan 24, 2004 (1:05 am)
Reply
I called my dealer about the valve(??) noise and the service manager said not to be concerned. He said that if the timing were off, it would be very difficult to start, which it isn't. He also said that if the knock sensor was bad, the check engine light would be on, but it isn't. My knocking, or pinging, isn't so bad that I cannot live with it but I want to be sure that I am not gong to cause any long term damage. The dealer said that I should not be concerned about engine damage from the pinging so I'm not taking it in yet. In your case, nomorevw1, the vibration you are experiencing may be the knock sensor kicking in to retard the pinging. This is the purpose of the knock sensor. You should try a tank of 89 or 93 octane to see if the same behavior occurs to confirm this. It sounds like you and I are experiencing the same "problem" but I have not noticed the vibration, maybe because I did go ahead and fill up with 93.
 
Let's keep the dialog open to see how it goes for the next few thousand miles.
 
Thanks for the responses.
#215 of 531
87 Octane 03 V6 by moparbad
Jan 25, 2004 (9:44 am)
Reply
Regular unleaded in my area is 87 octane and no pinging/detonation in my 03 V6.
#216 of 531
Re: '04 Tacoma V6 valve noise by apicalsys
Jan 27, 2004 (7:51 am)
Reply
Since we've only got ~1000 miles, maybe the engine hasn't "loosened up" yet. Gonna give mine some more time before I let dealer look at it. I'll see what it's like around 4000 miles when I go in for 1st oil change.
#217 of 531
Maintenance intervals by mtngal
Jan 27, 2004 (1:04 pm)
Reply
I've managed to lose my maintenance manual for my 2000 2WD Xtra Cab 4 cylinder Tacoma. I'm overdue for the 120,000 mile servicing and starting to think about the 150,000 mile servicing. Does anyone know of a link to a web site that would call out what is supposed to be done for each servicing? Or else, take a look at their manual and let me know which one (I vaguely recollect that they are different) is the more extensive, and what is required? I sure would appreciate it!
 
Also, could I get a new one from the dealer?
#218 of 531
mtngal by steveeast
Jan 27, 2004 (1:41 pm)
Reply
You can get that info from Toyota's web site.
 
http://www.toyotapartsandservice.com/smg/pdfs/auto_truck_service_- 00.pdf
 
has the complete info for a 2000, but you can also request it for just a specific mileage.
 
Steve.
 
Steve.
#219 of 531
steveeast by mtngal
Jan 27, 2004 (2:01 pm)
Reply
Thank you very much - that is exactly what I was looking for! I went ahead and printed out the truck portion so I'll be able to figure it out later.
#220 of 531
RE: magnaflow muffler by chorton
Feb 03, 2004 (11:29 am)
Reply
I got the 1 in, 2 out system, It's not REAL dual exhaust, but I LOVE IT! It keeps sounding better with age. The gas mileage is up to about 21mpg hwy! my all around mileage is about 17mpg. Took it off roading a few weeks ago, that exhaust really sounds good when there is a slight strain at 2k-3k rpm. I put the dual pipes out both sides between the back tires and the rr bumper so it would look as close to factory as possible. The power increase is mostly at hwy speeds, but itr seems to have taken about 1/2 to 3/4 of a second off my 0-60 time. it's still around 10 seconds though. My White 00 Tacoma X-cab SR5 V6 Auto came with the 3:9 rear end(bought it used w/48,000 miles). I wish it had the 4:1. But the 31/10.50's seem to do fine even without it.
does anyone here have any advice on finding a USED 4:1,maybe at a junkyard or somthing. with the locking diff? That would top it off!!!

Messages Page 22 of 53
1
...
19
20
21
22
23
24
25
...
53
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement