You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado: Problems & Solutions 

Chevy Silverado: Problems & Solutions - READ ONLY

1497 messages,  Last post on Oct 17, 2006 at 8:34 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, Truck

Messages Page 149 of 151 1 ... 145 146 147 148 149 150 151 Prev Next Last

Go To Msg # Search This Discussion

#1472 of 1497 Re: SHIFT INDICATOR [donbal] by geo9 Sep 22, 2006 (6:28 am)
Replying to: donbal (Sep 20, 2006 1:35 pm) DON........You checked all your fuses right? A LOT of 03-04 cluster failures reported in many GM truck threads............   Check your owners manual on how to set the auto locks on your truck...........
#1473 of 1497 Need body bushing by 85scottsdale Sep 22, 2006 (9:58 am)
Got an '85 Scottsdale that needs a body bushing replaced. Problem is, I'm not having any luck tracking one down. I didn't think it would be that hard to find one. The only other option I can think of would be to buy a small body lift kit and have them all replaced...thing is, this is a beater truck that just helps me move firewood, home depot runs, and craigslist purchases...not really looking to drop $300-$500 on having it lifted. Anyone have any ideas? My guy in the shop said he has a Dodge Durango that is scrap...he'd take one off of there and put it on mine if I wanted.
#1474 of 1497 Re: RayT, [chevy4life] by kurtschev Sep 27, 2006 (6:57 pm)
Replying to: chevy4life (May 11, 2004 12:04 pm) Sorry to butt in... I'm new to this. the thermometer on my 2001 Silverado says NC in the mirror readout. Any ideas....   Thanls!
#1475 of 1497 2001 Silverado Thermometer problems by kurtschev Sep 27, 2006 (6:59 pm)
the mirror readout says "NC" any body know the fix?
#1476 of 1497 Spring slap by evergreen Sep 28, 2006 (6:52 pm)
I have a 2000 Sierra Z71 with 60,000 miles on it. Within the first year of ownership, I started hearing a noise from the rear of the truck that sounded like a loose traler hitch. I had to hit a pretty good bump to make the noise so it wasn't normally bothersome. Every time I took it in for service, A I mentioned this noise and they always said they couldn't get it to make any noise and everything looked ok. I recently moved to a different town and took the truck to a Chev dealer for service. They checked out the noise and said there was some special lubricant they could apply to the spring that might possibly help and the total fix would cost about $100. I had previously determined that the noise was just on the passenger side wheel area so a spring problem could be the cause of the noise. Springs aren't exactly complex and I don't understand why one spring was fine and the other makes this noise. I go fishing and hunting a lot more since moving to this new town and riding over some washboard gravel road really makes some noise. I guess nothing is being harmed but it sure sounds bad. Any thoughts as too the cause of this noise and the appropriate cure? Replies to this message: bulldog59 (Sep 28, 2006 7:08 pm) obyone (Oct 05, 2006 3:27 pm)
#1477 of 1497 Re: Spring slap [evergreen] by bulldog59 Sep 28, 2006 (7:08 pm)
Replying to: evergreen (Sep 28, 2006 6:52 pm) I agree there is no "rocket science" in springs,BUT you haven't mentioned anything about TIRES, try rotating while they are off look for a busted leaf in the spring assy. That and maybe you have bad SHOCK, something could be bouncing around in there!
#1478 of 1497 Re: 2001 Chevrolet 3500HD Startup Failure [bigtrck] by tdare Sep 29, 2006 (8:17 am)
Replying to: bigtrck (May 09, 2005 10:58 am) I am having similar problems. Have you found out anything on what the problem is/was...???? I am still having the problems... and getting worse.
#1479 of 1497 1996 4WD Problems by tbar32 Sep 29, 2006 (11:54 am)
I have a 1996 silverado Z71 that runs great but the 4wd recently quit working the front driveshaft spins but the front tires dont. It is a push button 4wd system and when I push the button it just blinks and stays in 2WD. I have no idea what is going on. any ideas or ways to fix this would be great
#1480 of 1497 Re: Driveline Clunk [canayjun64] by 04silveado Oct 02, 2006 (1:04 pm)
Replying to: canayjun64 (Aug 29, 2002 11:26 am) sorry guys i don't mean to take over this post, but i have no idea how to create a new one.   I recently just bought an 04 silverado 4x4 extended cab w/ the vortec 4.8. When I bought the truck it had 66,500 miles on it. The dealer that I had bought it from took it to a garage and got it inspected for me, as well as an oil change. The sticker that was put in my windshield says that the next service should be 70,500. Well i am at somewhere around 69,200 right now.   This morning i got in my truck and everything looked fine, but when i got done work i got in my truck and started it and i noticed that the change engine oil came over the display. Now my engine light is on. Is this on because my truck is saying to change the engine oil or should i bring it to a garage and get the code checked? Any help would be greatly appreciated.   Once again i apologize if i am taking over someones post.   p.s. Could someone explain to me how to create a new post? Replies to this message: matman98 (Oct 02, 2006 3:09 pm) evergreen (Oct 02, 2006 6:50 pm) the_big_al (Jun 27, 2008 3:16 pm) l204 (Oct 08, 2006 7:35 pm)
#1481 of 1497 Re: Driveline Clunk [04silveado] by matman98 Oct 02, 2006 (3:09 pm)
Replying to: 04silveado (Oct 02, 2006 1:04 pm) Check your owners manual. In it where it says when to check your oil it will tell you how to reset the change oil message. Your dealer should be able to reset this at no or little cost. It takes about 30 seconds to do.....Matman98 Replies to this message: evergreen (Oct 02, 2006 6:50 pm)

Messages Page 149 of 151 1 ... 145 146 147 148 149 150 151 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado: Problems & Solutions