Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Wagons Subaru Crew Subaru Crew Problems & Solutions
18377 messages, Last post on Dec 01, 2009 at 6:15 PM
You are in the Subaru Crew Forum. Your Host is kcram
Your Community Leaders are ateixeira and rsholland.
|
|
|---|---|
|
Replying to: aatherton (Oct 11, 2008 3:36 pm)
|
|
|
Replying to: wade8 (Oct 01, 2008 10:20 pm) MNSteve |
|
| Thanks for the suggestions. I will see what the dealer says tomorrow when I get my car towed there, and I'll report back with any relevant news. | |
|
Replying to: kurtamaxxxguy (Oct 12, 2008 9:14 am) |
|
Here are my latest (fairly somber) options:  1) have my independent mechanic, who has taken great care of me in the past, put an '05 Forester engine in my car with 58K miles for $4600. 2) authorize Subaru to do a tear-down and inspection, which will cost $850. Only then can they determine if there is damage to the cylinder heads and cam shaft, and only then can Subaru headquarters provide an answer on what type of assistance, if any, they can give me. If no damage is found to the above-mentioned components, I'm looking at a remanufactured shortblock with new engine gaskets for $4150. This price includes the $850 for tear-down. If I had a crystal ball and knew there would be no further damage found, this would be the way to go because Subaru's warranty on a remanufactured engine is better than what my independent mechanic will get at a scrap-yard. BUT....if there is damage to the heads and shaft, the total estimate for repair is $8000. Every day I am shocked by some new piece of news. If that's the case, I can't do it. I'll have to bring it back to my mechanic and cut my losses on the $850 for tear-down. This is getting ridiculous. I feel like every option I have is awful. I called Subaru headquarters again today (in tears) and someone is supposed to call me back later to further discuss my options. But I know they need that tear-down before they can guarantee me anything. At their request, I provided all of my records to my Subaru dealer so they can see that I have taken care of the car to an anal degree. Don't know if this will help. Is there a third option? Does anyone have any idea what I can get, if anything, for a Forester that---with the exception of the ENGINE--is in really good shape, with new, high-quality tires, new timing belt and pulleys, and new brakes? Would anyone give me anything for this car? At this point I would feel lucky to be able to just pay off my loan and start from scratch. 
|
|
|
That sucks... and, I'm sure.. it's the not knowing that makes it worse... Seem obvious that you are going to have to pay for that tear-down.. If everything else is as you describe, then I feel there is a good chance that Subaru will step up and help out with this. (At least, that is the healthful attitude to take). Try to stay positive with the Subaru reps, letting them know that you have no doubt that they will come through for you, even if you have major doubts.. Because, I sure wouldn't want to have to pay $4600 for a used engine....  Good luck.. and hang in there! |
|
|
|
|
Replying to: tanager (Oct 16, 2008 7:39 am) My suggestion would be to give Subaru some time to respond, if possible. If they don't come through, it sounds like your independent mechanic is the way to go. An engine swap's a major piece of work, unfortunately.
|
|
|
Replying to: kurtamaxxxguy (Oct 16, 2008 8:35 am)
|
|
|
Replying to: xwesx (Oct 16, 2008 1:56 pm)
|
|
|
|
I have a Subaru Outback that started overheating as many others in forums have written obout. Temperature guage buried on H, bubbles in the reserve tank with a light film of dark solution, and loss of antifreeze in the radiator regularly. I would assume it was the head gasket as I changed out the radiator as it blew out and replaced the top radiator hose as it continually collapsed. This is what I did to remedy MY problem and it may not work for everyone BUT if it works for you as it did for me, it is a whole lot cheaper than tearing into the engine. I removed the 2 bolts by the lower radiator hose at the thermostat and let it drain. Took out old thermostat and took a garden hose and flushed out radiator good. Then plugged radiator hose and engine outlet with rags and filled radiator full. Did this a few times to flush ALL antifreeze from engine and radiator. Then I cut the guts out of the old thermostat so it was free flowing . I installed it in the car and installed 2 bolts. Also remove overflow tank and drain. I put in about a quart of water and purchased a quart of BLUE DEVIL from Schucks Auto and poured all of it in radiator and filled with water. Need to make sure radiator is full and engine burped. Jack up front of car. Let car idle for 45 minutes then you can drive around if you want. Temp guage will fall to cold but that was ok, in all I let my car run constantly for 2 1/2 hours. Kept an eye on guages so it never got hot. Stayed in mid range where it should. Drain solution from thermostat area, let cool down for 2 hours or more, install new 170 thermostat, gallon antifreeze and water. It took me a half hour to burp system of air with front of car in air. I squeezed upper radiator hose and all to help it along. As this is going on have car running with heater on and blower on high. All should be well when HOT air comes out of heater. It fixed my problem and it could help you. I have been on the road for 3 months now and it cost $65
|
|
You are here:
Forums
Wagons Subaru Crew Subaru Crew Problems & Solutions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Subaru Impreza
2010 Subaru Outback
2010 Subaru Forester
2010 Subaru Legacy
Browse by Board
Browse by Topic
Today's Chats
