You are here: Forums Sedans Infiniti G35 Infiniti G35 Maintenance and Repair

Infiniti G35 Maintenance and Repair

2838 messages,  Last post on Dec 04, 2009 at 8:43 AM

You are in the Infiniti G35 Forum. Your Hosts are pat & karens

What is this discussion about? Infiniti G35, Sedan

Messages Page 281 of 284 1 ... 278 279 280 281 282 283 284 Prev Next Last

Go To Msg # Search This Discussion

#2800 of 2838 Re: Problem with a starting hesitation or extended crank? [triblkg] by darrinzramz Aug 03, 2009 (7:46 am)
Replying to: triblkg (Aug 01, 2009 10:08 am) you need to explain it a little better!!,it cranks but won't start or a low battery voltage,could be faulty starter?,cam shaft pos.sensor?,timing off a bit,when you get it started does it run properly!!!.Or does it have hesitation problems??,please try to give me a more accurate symtom(s) your sedan is having!! Replies to this message: triblkg (Aug 03, 2009 9:12 am)
#2801 of 2838 Re: Problem with a starting hesitation or extended crank? [darrinzramz] by triblkg Aug 03, 2009 (9:12 am)
Replying to: darrinzramz (Aug 03, 2009 7:46 am) The car hesitates(takes longer to start) during starting/cranking process; it does crank, after a while, and so far starts. Start time varies taking anywhere between 2 secs and approx. 12 secs before it starts. Battery voltage is good(new battery). Crank/Cam pos. sensors are good - newly replaced as well as IPDM, fuel pump and fuel pressure sensor. The problem does not generate any error msgs.   Sorry about not providing more info this is the first time I have ever posted.
#2802 of 2838 vdc, slip, check-eng-soon lights will not go away!! by salsero63 Aug 04, 2009 (4:29 am)
after scanning the first time, showing the cam sensor #2; put it on and fixed that problem, then was showing the #1 sensor; put new one in and still showing the code for #1; took it back to auto part thinking was damage, got another new sensor and the lights still on; every time I erase the code, lights go out run the car for 1 min and/or 1hr as soon I shut the eng down and crank it back up lights are on again and will not go away and the same code for #1 sensor shows up again with a new sensor; the car runs fine, has power, however, takes few seconds longer to start. I used an $8,000 comp to scan and erase the code, nothing shuts this lights. The car has 108,000 miles never gave me any problems, and still running like a champ, with the same lights on. Has front and back new brakes, new tires, rotors in good shape, however, never machined. need help on this one.
#2803 of 2838 Mileage for G35 by jdonnee1 Aug 22, 2009 (11:04 am)
My son is looking for a G35 Coupe. I see plenty of used ones in his price range with between 50,000 and 80,000 miles. Should I have any concerns with this amount of mileage from a maintenance standpoint. Replies to this message: raizelgs (Aug 23, 2009 7:33 pm) darrinzramz (Aug 24, 2009 6:43 am) lewisw (Aug 24, 2009 6:11 am)
#2804 of 2838 Re: Mileage for G35 [jdonnee1] by raizelgs Aug 23, 2009 (7:33 pm)
Replying to: jdonnee1 (Aug 22, 2009 11:04 am) Not if the car has been maintained. The 2004's had some brake issues, but I have an 2005 with 60,000 miles and have only replaced the rear brakes once, with the fronts having half of the original pads still OK.   I also changed some belts and filters and have had regular oil changes. Replies to this message: darrinzramz (Aug 24, 2009 6:43 am)
#2805 of 2838 Re: Mileage for G35 [jdonnee1] by lewisw Aug 24, 2009 (6:11 am)
Replying to: jdonnee1 (Aug 22, 2009 11:04 am) Have a 2004 w/ 72,000 mi. Have done break pads once, and rear tires about every 22-24,000 miles. I'm a fairly conservative driver. Other than that, the normal maintenance stuff. Been a trouble free car.
#2806 of 2838 2004 infiniti by darrinzramz Aug 24, 2009 (6:27 am)
That's real good!!!!!,the only things I would suggest is:change pads & rotors to after-market ones!!!,OEM on this car wear-out ALOT faster than other cars,I changed my car's rotors and pads to:Hawk HPS pads,and EBC rotors,not very expensive and will hold-up alot longer than OEM pads & rotors PLUS alot better braking and alot less dust!!!
#2807 of 2838 Re: Mileage for G35 [raizelgs] by darrinzramz Aug 24, 2009 (6:43 am)
Replying to: raizelgs (Aug 23, 2009 7:33 pm) I might have to disagree w/you on that brakes issue!!,I have 2004 Infiniti G35 sedan I bought in Jan.2008,had the dealer put new front brake pads and new rotors on and a year & 1/2 later the pads were worn down almost 70%!!!!.I drive around town alot that does increase brake use alot more.Remember also these brakes bite really nice!!,may-be that's WHY they wear out alot quicker than other cars,I changed my brake pads & rotors to:Hawk HPS pads & EBC rotors since that change there is alot less brake dust on my wheels & alot better stopping power,I'll be checking these pads too,soon as I rotate my tires at next interval.
#2808 of 2838 Moonroof Not Closing by mrwatts Aug 25, 2009 (6:22 am)
I attempted to open the moonroof, and it made a grinding sounds. When closing it made the same sound. But didn't close completely, is there a manual way to close it without having to open the headliner? Replies to this message: darrinzramz (Aug 25, 2009 6:44 am)
#2809 of 2838 Re: Moonroof Not Closing [mrwatts] by darrinzramz Aug 25, 2009 (6:44 am)
Replying to: mrwatts (Aug 25, 2009 6:22 am) what year is the car??,If it's under warranty(which I assume it may not be!)be carefull !!!,does it sound like a motor problem or maybe dirt or sand in the track!!???,does it move smoothly when closing or does it stagger or jump a little when closing??.If you are not sure you really should let the dealer service it only!!!,I have an extended warranty on my car to protect me from things like this that might pop-up!!!,Darrin

Messages Page 281 of 284 1 ... 278 279 280 281 282 283 284 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Infiniti G35 Infiniti G35 Maintenance and Repair