You are here:
Forums
Sedans
Buick Park Avenue
Buick Park Avenue Maintenance & Repair

300 messages, Last post on Dec 06, 2009 at 6:50 PM
You are in the Buick Park Avenue Forum. Your Hosts are pat & karens
|
Replying to: imidazol97 (Apr 03, 2009 5:41 am) |
|
|
Replying to: imidazol97 (Apr 03, 2009 5:41 am)
|
|
|
|
|
Replying to: tankbeans (Apr 04, 2009 11:29 am)
|
|
|
Replying to: imidazol97 (Apr 04, 2009 12:09 pm)
|
|
|
Replying to: imidazol97 (Apr 01, 2009 2:14 pm) Thanks sooo much for your reply! On the evening I posted my question, I went back to AZ and had another diagnostic test. That reading indicated that I needed to check my Catalytic "xyz" and Massive Airflow Sensor. I told the young man that I received the MAS reading a week or so before and because of that I purchased a new MAF sensor and had it installed. Now disgusted with these new "codes" I took the car to PB so they could a) just fix the darn thing and b) do inspection afterwards. Well, much to my dismay, they called me at work and said their diagnostic test sited that I needed a Body Control Module. They said they could not service my car nor issue me the inspection stickers because the SE Soon light was still on. They told me the best place for me to go is to a Buick dealership. One good thing, though, PB did not charge me the $89.00 + tax for the diagnostic test. When I called the nearest dealership (which is 1,000,000,00 miles away), they gave me a total price of $545.00 for the part and labor ($595.00 when I called a little later in the day to confirm). Disgusted again, I wound up calling an old mechanic friend. He told me to drop the car off on Friday morning and he would look at it. Well, that was April 3rd but I got my car back on April 5th and that was only because I wanted him to drive it around awhile just in case something was to come up. So far, Thank God, my car has been running fine. Thanks, again, imidazol97 |
|
|
Replying to: tankbeans (Apr 04, 2009 12:26 pm) |
|
|
|
|
where is the fuel vapor canister located. I was told my 00 park ave had a leak but I don't know where to look for it. I checked and replaced the gas cap but the check engine light keeps coming on with the same code. Any info or suggestions will be greatly appreaciated. |
|
|
|
|
Replying to: 94buickgrey (Feb 11, 2009 12:37 pm) |
|
|
I have a '94 Park avenue. The temperature numbers (only) on the temperature display will blink on and off about five times when I hit the auto button on the environmental controls console. Since this has started, the heating/cooling is wacky. The fan will set itself on high, and I will get heat out of the driver vents and cold out of the passenger vents. Does the flashing temp numbers indicate a failure or error? Is there a way to reset this system? TIA
|
|
|
Replying to: dabo (Apr 21, 2009 11:38 am) The temperature digits flash when the car is turned on, not when the auto button is pushed. Thanks.. |
|
You are here:
Forums
Sedans
Buick Park Avenue
Buick Park Avenue Maintenance & Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Buick Park Avenue



Browse by Board
Browse by Topic
Today's Chats