You are here: Forums Pickups Ford F-Series Ford F-Series Accessories and Modifications

Ford F-Series Accessories and Modifications

45 messages,  Last post on Jan 21, 2009 at 3:40 PM

You are in the Ford F-Series Forum. Your Host is kcram

What is this discussion about? Ford F-150, Ford F-350, Ford F-250, Truck

Messages Page 2 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#10 of 45 bed rail liner by aspesisteve May 17, 2006 (7:50 pm)
I need to replace my bed-rail liner on the top of the lift gate on my '04 F150.   Anyone know a place other than Ford where I can buy that?   Ford wants $75 for this piece of plastic.
#11 of 45 f250 5.4l perfomance by knob Jun 02, 2006 (10:41 pm)
I HAVE A AUSTRALIAN F250 5.4L 2004 MODEL, I WAS WONDERING IF ANYONE HAS FITTED HEADERS OR CHIP AND WHAT RESULTS IF ANY DID YOU GET. I HAVE MADE EXHAUST FROM MANIFOLDS BACK AND CHASIS DYNOED BEFORE AND AFTER WITH VERY LITTLE GAIN, MANIFOLDS LOOK VERY RESTRICTIVE. CANNOT BUY HEADERS IN AUSTRALIA SO I NEED TO KNOW IF IT IS WORTH BUYING FROM THE USA OR MAKING THEM MYSELF. WHICH BRAND IS THE BEST. I HAVE TRIED SUPERCHIPS MODULE ON DYNO DID NOT CHANGE POWER OUTPUT BUT MADE TRANSMISSION SHIFT BETTER, IS THERE A MODULE THAT WORKS? THANKS KNOB
#12 of 45 rear end gears by mcfarlain Jun 14, 2006 (4:13 pm)
I just inherited a dually from my dad. It gets about 10 mpg. I am thinking about going with 373gears instead of 411gears to improve mpg.I dont pull much more than a boat or utility trailer. 373's should do right? Replies to this message: bboone52 (Jun 28, 2006 1:42 pm)
#13 of 45 Suspension Modfications by ford624 Jun 18, 2006 (9:13 am)
I am considering lowering my new 2wd F 150 Supercrew. Has anyone heard or experienced anything about the different kits that are avaliable? What is the best all around set-ups? "Thanks"
#14 of 45 Re: rear end gears [mcfarlain] by bboone52 Jun 28, 2006 (1:42 pm)
Replying to: mcfarlain (Jun 14, 2006 4:13 pm) I have an F350 ( just bought used)and probably have the 411 gear too. I am trying to determine that now. I talked to one person who seemed knowledgeable and there is another gear higher? than the 373 you may want to research if all you are towing is a boat. I plan to have a 3000lb slide in camper and a small boat to tow and I think I have enough power to do this and still change the gear for better fuel economy. I basically am trying to find sources to learn about towing and gears as well as who to trust to do the work. Any leads would be grately appreciated
#15 of 45 88 F-250 by casper3 Sep 10, 2006 (5:32 pm)
I am thinking of buying a 88 F-250 and I was wondering if I can put a turbo on it.
#16 of 45 Ford Transmission by routemanron Dec 26, 2006 (12:06 pm)
I have a 1997 F150 4x4 4.6. the auto transmission no good and I have a 1991 F150 4X4 300 6cyl and a 1990 F150 4X4 5.0 V8 Both have standard shift. Is there any way to put the standard shift in the 1997.
#17 of 45 tranmission swap by ksp Apr 10, 2007 (5:37 pm)
#18 of 45 tranmission swap by ksp Apr 10, 2007 (5:37 pm)
is it possibale to put a 4 speed from 300 6cyl to a 351w with bellhouseing swap
#19 of 45 2008 Super Duty Billet Vents by abp1 Jul 28, 2007 (11:13 pm)
This is my billet vent insert. I Replaced the stock insert with this one it looks so muck better. This is black ano it also comes in polished for around 200 installed.   I am also working on a vent kit for all f-series models. You will have to do some cutting. It will be worth it though. Would you guys want to see something like that?

Messages Page 2 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford F-Series Ford F-Series Accessories and Modifications