You are here: Forums Pickups Ford F-Series Ford F-Series Accessories and Modifications

Ford F-Series Accessories and Modifications

45 messages,  Last post on Jan 21, 2009 at 3:40 PM

You are in the Ford F-Series Forum. Your Host is kcram

What is this discussion about? Ford F-150, Ford F-350, Ford F-250, Truck

Messages Page 5 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

#36 of 45 by richie1515 Jul 25, 2008 (8:34 am)
Hi everyone I'm new to this so I'm a little uncertain how it works? My question is I have a 2006 F250 diesel fx4 lariat 4dr short bed can I put 35' tires on it w/o a lift?...or if a lift is needed what would be the smallest I can get away with? -R
#37 of 45 CONVERTING FROM MANUAL TO P/W, P/L by dbcambo Aug 08, 2008 (3:30 pm)
I WANT TO CONVERT MY 2006 F150 SUPER CAB TO P/W & P/L. I WANT TO USE OEM DOOR PANELS, ETC. WHAT DO I NEED FOR THIS PROJECT BESIDES THE PANELS? WILL PARTS FROM AN F250 OR 350 WORK? ANY HELP WILL BE APPRECIATED. THANKS, DON
#38 of 45 After market tires and rims by dpierce101 Aug 11, 2008 (10:44 am)
I have a 2008 F350 I recently put bigger tires and rims on. The low pressure sensor stays on all the time as these tires use less psi. Ford dealer says there is no way to change pressure sensor to work with these tires, Please help or send electrical tape. Replies to this message: mschmal (Aug 12, 2008 11:37 am) dpierce101 (Aug 13, 2008 6:31 am)
#39 of 45 Re: After market tires and rims [dpierce101] by mschmal Aug 12, 2008 (11:37 am)
Replying to: dpierce101 (Aug 11, 2008 10:44 am) Use the tpm tool that came with the truck, looks like a keyless entry remote. Replies to this message: dpierce101 (Aug 13, 2008 6:31 am)
#40 of 45 Re: After market tires and rims [mschmal] by dpierce101 Aug 13, 2008 (6:31 am)
Replying to: mschmal (Aug 12, 2008 11:37 am) I tried that tool, but it only calibrates between two different pressures. Will not work for my new tires. Thanks for replying though.
#41 of 45 roush f-150 up grades by fordman25 Aug 11, 2008 (8:01 am)
what can you do if you purchase a 2007 roush f-150 stage 3 and you want to inhance the horsepower. After all roush racing is all about speed and performance.
#42 of 45 F-150 4.9, Turbo? by mike9408 Oct 17, 2008 (4:48 pm)
Hi gang, I have a 91 f-150 that I have been working on for about a year. I am interested in putting a turbo on it. Can anyone give me imformation about this? Like the size of turbo to use, waste gate?, working with the ECM, what about the brakes, can I put a vacuum pump on it like a diesel has. Has anyone ever heard of anyone doing this? Or should I just forget the idea? Any input would be appreciated. Mike
#43 of 45 HEADLIGHT ASSEMBLY by harley19 Jan 06, 2009 (2:24 pm)
#44 of 45 HEADLIGHT ASSEMBLY by harley19 Jan 06, 2009 (2:24 pm)
How do i pullout the entire headlight assembly off of the truck 97 f350, i need to drill 1 inch holes in the back of the directional lenses to put strobe lights in , i see the two screws in the top but cant find anymore.
#45 of 45 1985 ford f250 straight axle swap by zgreene Jan 21, 2009 (3:40 pm)
i have owned a 1985 ford f250 for a while now and am ready to do a little bit of a lift to it but first i want to get the front axle switched. right now it is stock but i want to put a dana 60 in and i was just wondering if anyone knew what year f350 i can use or if the older 250 will work

Messages Page 5 of 5 1 2 3 4 5 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford F-Series Ford F-Series Accessories and Modifications