You are here: Forums Pickups Ford F-Series Ford F-Series Accessories and Modifications

Ford F-Series Accessories and Modifications

45 messages,  Last post on Jan 21, 2009 at 3:40 PM

You are in the Ford F-Series Forum. Your Host is kcram

What is this discussion about? Ford F-150, Ford F-350, Ford F-250, Truck

Messages Page 5 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

#32 of 45 Re: F150 exhaust system ? [wesbuck4] by tfoster2 Jul 01, 2008 (4:49 pm)
Replying to: wesbuck4 (Apr 19, 2008 5:00 pm) i have a 2005 f150 4,6 v8,i installed a cat back exhaust system .which installs behind muffler,new system muffler has dual outlets and tail pipes mine is magna flow with great sound,but you can get flow master or many others .i got mine at ebay store called madhatter mufflers for 169.00 with chrome tips ,but they are on ebay for as low as 117.00,you will feel the difference,you might also look into cold air kit .from kn,airaid and others ,it gives real horse p[ower kick. hope this helps
#33 of 45 5.4L Triton exhaust backpressure by xtrukker Jul 15, 2008 (4:40 pm)
New to the forum...hope I'm not opening a can of worms. I'm thinking about putting open exhaust (OPEN) on my 02 f250 with the 5.4L, 6spd, 4WD, 3.73's in hopes of improving my mpg. Any thoughts on that (besides the EPA - there's no emissions testing in my state). If I do it, I plan on keeping the OEM system if I wind up having to put it back on. I've been having trouble finding any info on whether this engine needs a certain backpressure reading. There's no sensors in or after the cat, so I'm thinking I could run straights off the manifolds (if I can stand the noise) and the ECM wouldn't know the difference. Right now I'm getting 12-13mpg in town. Have a K&N filter, otherwise truck is stock.
#34 of 45 '95 F150 rail holes by darich Jul 16, 2008 (2:08 am)
My neighbor needs to drill tiedown holes through the railcaps on his short bed pickup, and would like to know if anyone knows the measurements so when he drills he comes through flush with the pre-existing holes on the rails themselves. He has a bedliner installed and thus can't tell from beneath where the holes are located. Precise measurements from the cab/front end of the bed would help him immensely.
#35 of 45 air lift air bags by djm12 Jul 21, 2008 (6:11 pm)
i have a 99 ford f250 standard cab long bed .... im trying to install air lift brand air bags on it... the problem is where they are sopposed to mount the frame has an indentation.... it almost looks like the brackets need to be an inch longer... i checked with the manufacture and its thr right model for the truck.... any suggestions or a picture would be great... thanks dustin
#36 of 45 by richie1515 Jul 25, 2008 (8:34 am)
Hi everyone I'm new to this so I'm a little uncertain how it works? My question is I have a 2006 F250 diesel fx4 lariat 4dr short bed can I put 35' tires on it w/o a lift?...or if a lift is needed what would be the smallest I can get away with? -R
#37 of 45 CONVERTING FROM MANUAL TO P/W, P/L by dbcambo Aug 08, 2008 (3:30 pm)
I WANT TO CONVERT MY 2006 F150 SUPER CAB TO P/W & P/L. I WANT TO USE OEM DOOR PANELS, ETC. WHAT DO I NEED FOR THIS PROJECT BESIDES THE PANELS? WILL PARTS FROM AN F250 OR 350 WORK? ANY HELP WILL BE APPRECIATED. THANKS, DON
#38 of 45 After market tires and rims by dpierce101 Aug 11, 2008 (10:44 am)
I have a 2008 F350 I recently put bigger tires and rims on. The low pressure sensor stays on all the time as these tires use less psi. Ford dealer says there is no way to change pressure sensor to work with these tires, Please help or send electrical tape. Replies to this message: mschmal (Aug 12, 2008 11:37 am) dpierce101 (Aug 13, 2008 6:31 am)
#39 of 45 Re: After market tires and rims [dpierce101] by mschmal Aug 12, 2008 (11:37 am)
Replying to: dpierce101 (Aug 11, 2008 10:44 am) Use the tpm tool that came with the truck, looks like a keyless entry remote. Replies to this message: dpierce101 (Aug 13, 2008 6:31 am)
#40 of 45 Re: After market tires and rims [mschmal] by dpierce101 Aug 13, 2008 (6:31 am)
Replying to: mschmal (Aug 12, 2008 11:37 am) I tried that tool, but it only calibrates between two different pressures. Will not work for my new tires. Thanks for replying though.
#41 of 45 roush f-150 up grades by fordman25 Aug 11, 2008 (8:01 am)
what can you do if you purchase a 2007 roush f-150 stage 3 and you want to inhance the horsepower. After all roush racing is all about speed and performance.

Messages Page 5 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford F-Series Ford F-Series Accessories and Modifications