You are here:
Forums
Pickups
Ford F-Series
Ford F-Series Accessories and Modifications

45 messages, Last post on Jan 21, 2009 at 3:40 PM
You are in the Ford F-Series Forum. Your Host is kcram
| Has anyone installed a chip on a 6.0 with a 6 speed? If so what brand and what were the gains? I have an 03 with this config and am thinking about adding a chip. I dont do a lot of towing but when i do its usaully just the Quads and a 16' tandem axle. | |
Does anyone have the factory navigation system in their 08 Super Duty? If so, what are the likes and dislikes of the system.
|
|
|
Replying to: fordz1 (Mar 01, 2008 6:47 pm) |
|
|
|
|
Replying to: fordz1 (Mar 01, 2008 6:47 pm) |
|
|
All, I have a question about improving the sound of my exhaust. I have a 2005 F150 4x4 that I love, but it is missing that mean loud truck sound that I hear from many other trucks on the road. I have a side exhaust that is factory from Ford, but I want to know how I can inexpensively make my exhaust system louder without completely changing out my system. What products are best for loudening my Ford's exhaust, or what changes can I make to give me that good rumble that I hear from many other trucks?
|
|
|
Replying to: wesbuck4 (Apr 19, 2008 5:00 pm) |
|
|
New to the forum...hope I'm not opening a can of worms. I'm thinking about putting open exhaust (OPEN) on my 02 f250 with the 5.4L, 6spd, 4WD, 3.73's in hopes of improving my mpg. Any thoughts on that (besides the EPA - there's no emissions testing in my state). If I do it, I plan on keeping the OEM system if I wind up having to put it back on. I've been having trouble finding any info on whether this engine needs a certain backpressure reading. There's no sensors in or after the cat, so I'm thinking I could run straights off the manifolds (if I can stand the noise) and the ECM wouldn't know the difference. Right now I'm getting 12-13mpg in town. Have a K&N filter, otherwise truck is stock. |
|
| My neighbor needs to drill tiedown holes through the railcaps on his short bed pickup, and would like to know if anyone knows the measurements so when he drills he comes through flush with the pre-existing holes on the rails themselves. He has a bedliner installed and thus can't tell from beneath where the holes are located. Precise measurements from the cab/front end of the bed would help him immensely. | |
| i have a 99 ford f250 standard cab long bed .... im trying to install air lift brand air bags on it... the problem is where they are sopposed to mount the frame has an indentation.... it almost looks like the brackets need to be an inch longer... i checked with the manufacture and its thr right model for the truck.... any suggestions or a picture would be great... thanks dustin | |
|
|
|
Hi everyone I'm new to this so I'm a little uncertain how it works? My question is I have a 2006 F250 diesel fx4 lariat 4dr short bed can I put 35' tires on it w/o a lift?...or if a lift is needed what would be the smallest I can get away with? -R |
|
You are here:
Forums
Pickups
Ford F-Series
Ford F-Series Accessories and Modifications
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Ford F-150
1997 Ford F-350
1999 Ford F-250



Browse by Board
Browse by Topic
Today's Chats