2331 messages,
Last post on Jun 12, 2013 at 8:38 AM
You are in the
Classic Cars Forum.
What is this discussion about?
Mercedes-Benz 300-Class, Engine, Fuel System, Diesel, Coupe, Sedan
#2287 of 2331 84 turbo deisel wont move,but runs fine
by manifesteros
Nov 21, 2010 (7:13 pm)
my 84 turbo deisel benz runs fine but wont go forward or backwards-It is an automatic.what could be the problem.It stopped moving after i shifted it in reverse after going forward without completely stopping
Nov 28, 2010 (4:18 pm)
Any thoughts on how best to find a potential new owner (preferably in Bethesda, MD) of a classic '84 300D in need of some fix-ups?
#2289 of 2331 Re: 300D [1984300d]
by Mr_Shiftright HOST
Nov 28, 2010 (6:28 pm)
Craigslist is really the best venue for this type of car. You want dreamers---big dreamers.
#2290 of 2331 car won't stop running
by benzsilver
Jan 05, 2011 (1:35 pm)
'84 cdt won't stop running when key is turned off! Help
#2291 of 2331 Re: car won't stop running [benzsilver]
by Mr_Shiftright HOST
Jan 05, 2011 (1:41 pm)
It sounds like you have a defective vacuum shut-off valve for the fuel. This is located at the left rear of your engine (driver's side is left).
REPAIR INSTRUCTIONS
#2292 of 2331 Shut-off valve module
by benzsilver
Jan 10, 2011 (1:11 pm)
Mr Shiftright: Thank you for your response. While checking the location of the shut-off valve, I have discovered a black vacuum line that goes thru the fire wall along with two yellow lines a green line, two gold blue strippped lines and another line. The goldblue stripped lines are connected to the ignition switch, the yellow lines go tward the defroster ducts, the green toward the a/c system and the other line somewhere else. these are all connected to something; however the black line is not connected to anything under the dash inside the car. the other end is connected to the y- connector that connects to the big line that goes to the booster and the business that sits on top of the rocker arm cover. I have looked for vacuun diagrams, however, none that I have seen so far illustrate the line that I am seeking a connection point. My vehicle is a "84 300 CDT. I have removed the lower dash panel and instrument cluster to be able to see the area better. I would appreciate your help and info regarding this quest. benzsilver and thank you again
#2293 of 2331 Re: Shut-off valve module [benzsilver]
by Mr_Shiftright HOST
Jan 10, 2011 (4:22 pm)
I don't have such a diagram either. Best thing I always suggest with loose vacuum lines is to extend them as far as they will reach in a 360 circle until it meets up with a connector that it can reach.
#2294 of 2331 Mercedes-Benz Documentary
by stop_motion
Mar 15, 2011 (9:17 am)
Glad to see Mercedes-Benz recognizing the work of Mercedes Motoring out of Los Angeles. They do some incredible work. I've followed them for years and their restorations only get better. Check out this short documentary on http://mercedes-benz.tv/
#2295 of 2331 Re: Mercedes-Benz Documentary [stop_motion]
by Mr_Shiftright HOST
Mar 15, 2011 (9:24 am)
Too bad the people making the video were more interested in their cameras and the music than in actual content.