Sign In Join 



Corvettes and all things about them

1900 messages,  Last post on Oct 15, 2009 at 5:42 PM

You are in the Chevrolet Corvette Forum. Your Host is claires

What is this discussion about? Chevrolet Corvette, Coupe, Convertible


Messages Page 186 of 191
1
...
183
184
185
186
187
188
189
...
191
Prev
Next
Last
Go To Msg #
Search This Discussion

#1848 of 1900
Re: [whitey11] by Mr_Shiftright HOST
Nov 15, 2008 (4:57 pm)
Reply

Replying to: whitey11 (Nov 15, 2008 11:25 am)

well sure if it has the modern body panels on it, it will look quite unusual. The Greenwood kits aren't sold in large numbers. But it's the "guts" you need to look at to see if it's Real or if its Memorex.
#1849 of 1900
by whitey11
Nov 16, 2008 (8:15 am)
Reply
Please explain guts?
#1850 of 1900
Re: [whitey11] by Mr_Shiftright HOST
Nov 16, 2008 (8:49 am)
Reply

Replying to: whitey11 (Nov 16, 2008 8:15 am)

The suspension, brakes, engine, exhaust, etc that might suggest a car originally modified by Greenwood for racing as opposed to a stock C4 that just has a body kit bolted to it.
#1851 of 1900
by whitey11
Nov 17, 2008 (1:40 pm)
Reply
should it be an original Greenwood, would it be worth more?
It looks and sounds great. My mechanic is checking the things you mentioned today for me. Thank You
#1852 of 1900
Re: [whitey11] by Mr_Shiftright HOST
Nov 17, 2008 (1:47 pm)
Reply

Replying to: whitey11 (Nov 17, 2008 1:40 pm)

Hard to say what the market is. This would require some research.
#1853 of 1900
Corvette Steering Column Lock by bhill2
Jan 13, 2009 (12:46 pm)
Reply
I recently had the 'Service Steering Lock' message come up on my 2003 with 6-speed manual. When I took it in to the dealer (probably a mistake) they replaced the 'Theft Deterrent Steering Column Lock', including the lock assembly and handed me a bill for about $625. My question is, should I
   1. Suck it up - after all I get to drive a Corvette
   2. Find a new place to have my Corvette serviced
   3. Get a lawyer.
 
Any insight or tales of experience that people might have would be welcome.
#1854 of 1900
Re: Corvette Steering Column Lock [bhill2] by Mr_Shiftright HOST
Jan 14, 2009 (8:19 am)
Reply

Replying to: bhill2 (Jan 13, 2009 12:46 pm)

If it were a Ferrari it would have been $6000. And you can go to a Chevy dealer to have it fixed. While I am truly sorry you're out $600 bucks, I really don't see your complaint here. You are after all, driving a high performance automobile requiring special factory training for the technicians.
 
Yep, you have to suck it up. I don't think bringing your Corvette to a Conoco station or Bill's Chevy Repair is a good idea; however, if you found an independent Corvette specialist, you could perhaps save 20% off dealer costs.
 
But you know, the dealer has the experience, the parts right there, so that's worth something.
 
If you get a lawyer, then it will end up costing you as much as a Ferrari repair
 
I checked on the cost of the lock and it's about $310 bucks. So that, plus diagnosis time plus labor to R&R, plus tax--it all sounds reasonable to me.
#1855 of 1900
Re: Corvette Steering Column Lock [bhill2] by starrow68
Jan 14, 2009 (8:27 am)
Reply

Replying to: bhill2 (Jan 13, 2009 12:46 pm)

Actually you don't have to suck it up. The column lock is a recall item and
should be covered even if the car is out of warranty. I have an '02, my records
show that I had the column lock fixed some time in '05, however, it locked
again in '08 and the dealer, not the one who did the original work, noted that
I already had the work performed. I said, good, but it's locked. They went
further and found that the lock plate was still intact, supposed to be removed by
prior work. So they removed plate and reflashed system. I did end up paying
for one new part in the steering column.
But that isn't the end of the story. About 6 months later, I get service CL msg
and car dies if you try to pull away. The steering works just fine since the plate
is removed but can't drive the car. Finally found the about $50 column lock
bypass aftermarket electronic module and had it installed by my local guy, not
the dealer. BTW also a 6 sp manual.
Randy
#1856 of 1900
Re: Corvette Steering Column Lock [starrow68] by Mr_Shiftright HOST
Jan 14, 2009 (8:49 am)
Reply

Replying to: starrow68 (Jan 14, 2009 8:27 am)

Good catch starrow but unfortunately that special extension has expired as of Feb. 2008, so I didn't mention it.
 
HOWEVER, now that you brought it up, I'll post it anyway and maybe he can lever the dealer or Chevy if he wants to spend the time to do so.
 
Bulletin No.: 05081
 
Date: February 08, 2006
 
SPECIAL POLICY
Subject:
05081 - SPECIAL POLICY ADJUSTMENT - ELECTRONIC COLUMN LOCK SYSTEM
 
Models:
1997-2004 CHEVROLET CORVETTE EQUIPPED WITH A MANUAL TRANSMISSION (MM6/M12)
1997-2000 CHEVROLET CORVETTE EQUIPPED WITH AUTOMATIC TRANSMISSION - EXPORT VEHICLES ONLY
2001-2004 CHEVROLET CORVETTE EQUIPPED WITH AUTOMATIC TRANSMISSION - EUROPEAN EXPORT VEHICLES ONLY
 
BEFORE PERFORMING THIS REPAIR, VERIFY THAT RECALL 04006 HAS BEEN PERFORMED ON THE VEHICLE (LABOR CODES V1144, V1145, V1153). IF THE REPAIR WAS NOT PERFORMED, PERFORM THE REPAIR IN RECALL BULLETIN 04006C, AND SUBMIT THE CLAIM USING THE APPROPRIATE RECALL LABOR CODE.
 
Condition
 
Some customers of 1997-2004 Chevrolet Corvettes equipped with a manual transmission (MM6/M12); 1997-2000 Chevrolet Export Corvettes equipped with an automatic transmission; and 2001-2004 Chevrolet European Export Corvettes equipped with an automatic transmission may have a condition where the column lock may fail to unlock the steering column when the vehicle is started.
 
Special Policy Adjustment
 
This special policy covers the condition described above until February 29, 2008, regardless of ownership. The repairs will be made at no charge to the customer.
 
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after February 8, 2006, are covered by this special policy and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to February 8, 2006, must be submiffed to the Service Contract provider.
#1857 of 1900
Re: Corvette Steering Column Lock [Mr_Shiftright] by bhill2
Jan 14, 2009 (1:49 pm)
Reply

Replying to: Mr_Shiftright (Jan 14, 2009 8:49 am)

I thank you, Shifty and Starrow. I am not seriously upset about the $600 (the reference to the lawyer was largely a joke), but given that there had been a recall on this item (the dealer said the recalled part wasn't the cause), and the Corvette is not an exotic, I wanted feedback. I will proceed to suck until it is all up, and go on enjoying my ride.

Messages Page 186 of 191
1
...
183
184
185
186
187
188
189
...
191
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement