Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Coupes & Convertibles Chevrolet Corvette Corvettes and all things about them
1886 messages, Last post on Jun 16, 2009 at 7:55 PM
You are in the Chevrolet Corvette Forum. Your Host is claires
|
|
|---|---|
|
Replying to: whitey11 (Nov 15, 2008 12:02 pm) |
|
I truly thank you for the advise. It's at the shop now to winterize it and the guy says he has seen many a corvette, but never 1 like this. He even had people stop by yesterday to take a look at it. It is pretty. Thank you for the help.
|
|
|
|
|
Replying to: whitey11 (Nov 15, 2008 12:25 pm) |
|
Please explain guts?
|
|
|
|
|
Replying to: whitey11 (Nov 16, 2008 9:15 am) |
|
|
should it be an original Greenwood, would it be worth more? It looks and sounds great. My mechanic is checking the things you mentioned today for me. Thank You
|
|
|
|
|
Replying to: whitey11 (Nov 17, 2008 2:40 pm) |
|
|
I recently had the 'Service Steering Lock' message come up on my 2003 with 6-speed manual. When I took it in to the dealer (probably a mistake) they replaced the 'Theft Deterrent Steering Column Lock', including the lock assembly and handed me a bill for about $625. My question is, should I 1. Suck it up - after all I get to drive a Corvette 2. Find a new place to have my Corvette serviced 3. Get a lawyer. Any insight or tales of experience that people might have would be welcome.
|
|
|
|
|
Replying to: bhill2 (Jan 13, 2009 1:46 pm) Yep, you have to suck it up. I don't think bringing your Corvette to a Conoco station or Bill's Chevy Repair is a good idea; however, if you found an independent Corvette specialist, you could perhaps save 20% off dealer costs. But you know, the dealer has the experience, the parts right there, so that's worth something. If you get a lawyer, then it will end up costing you as much as a Ferrari repair  I checked on the cost of the lock and it's about $310 bucks. So that, plus diagnosis time plus labor to R&R, plus tax--it all sounds reasonable to me. |
|
|
Replying to: bhill2 (Jan 13, 2009 1:46 pm) should be covered even if the car is out of warranty. I have an '02, my records show that I had the column lock fixed some time in '05, however, it locked again in '08 and the dealer, not the one who did the original work, noted that I already had the work performed. I said, good, but it's locked. They went further and found that the lock plate was still intact, supposed to be removed by prior work. So they removed plate and reflashed system. I did end up paying for one new part in the steering column. But that isn't the end of the story. About 6 months later, I get service CL msg and car dies if you try to pull away. The steering works just fine since the plate is removed but can't drive the car. Finally found the about $50 column lock bypass aftermarket electronic module and had it installed by my local guy, not the dealer. BTW also a 6 sp manual. Randy |
|
You are here:
Forums
Coupes & Convertibles Chevrolet Corvette Corvettes and all things about them
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Chevrolet Corvette
Browse by Board
Browse by Topic
Today's Chats
