Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Coupes & Convertibles Chevrolet Corvette Corvettes and all things about them
1908 messages, Last post on Dec 02, 2009 at 5:37 PM
You are in the Chevrolet Corvette Forum. Your Host is claires
Has anybody out there tried 5PDCoatings scratch remover? It sounds to good to be true! They claim it takes out swirl marks and scratches with very little effort. My vette is a black daily driver and if this stuff works I would think I died and went to Heaven!
|
|
|
Replying to: 55396 (Oct 31, 2007 9:27 pm) I just stumbled across it. You want brute power? Here ya go. Outlaw driving school http://outlawdrivingschool.com/classes.html |
|
|
Replying to: vettever (Nov 03, 2007 7:58 am) http://www.tintdude.com/auto-detailing.html I just use a polisher with just a touch of compound - scratch remover, whatever. Buff lightly until the compound burnishes out to a shine with just a light residue of compound left, then remove that with a cloth or towel. Experiment to find the method that works for you. On bad surfaces, I color sand with 1500-2500 wet-or-dry sand paper, then rubbing or polishing compound. Hand waxers may shudder, but it works. Once you get to this point, you can hand wax if you like. If a scratch has gone through the clear coat. there isn't much you can do, although I always wanted to carefully fill one like that with clear coat. and then color sand starting with a block, to get the surface level. Has anyone done this? Other methods/products?
|
|
|
Replying to: 55396 (Nov 03, 2007 9:37 am) I have a 99 C5 and in the next month I am going to strip off all the old wax , clean the paint, clay magic it, and reapply wax. Probably a 2 day project but the car should look pretty good. I find the scratch and swirl removers make for good marketing. just remembered i have to get a new air filter--just did a hard drive thru AZ and Nevada. |
|
|
Replying to: vettever (Nov 03, 2007 7:58 am) both our Vette's done a couple times. Whatever he did the last time on my Electron Blue took out the vast majority of the swirls and it looks good, except for the rock chips on the head light covers and hood, not to mention under the door panels. The wife's is Mill... Yellow and always seems to look good. Then again it never runs on race tracks. Zaino has some very good stuff. I use the spray on spot cleaner and it does wonders. Randy |
|
|
|
When I fill the tank on my 2007 C6 it will run over if I try to put any more gas in after it kicks off the first time. Does anyone else have this problem or jut me?
|
|
|
Replying to: motorhead1 (Nov 04, 2007 5:23 pm) |
|
|
Replying to: motorhead1 (Nov 04, 2007 5:23 pm) Don't do it. When it stops, it's full. |
|
|
|
|
Replying to: bolivar (Nov 04, 2007 7:59 pm)
|
|
|
Replying to: motorhead1 (Nov 05, 2007 1:52 pm) overfill. However, my '02 is like most older cars, it will take whatever I want to add to round up to even $ amount. Randy |
|
You are here:
Forums
Coupes & Convertibles Chevrolet Corvette Corvettes and all things about them
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Corvette
Browse by Board
Browse by Topic
Today's Chats
