You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Accessories & Modifications

Chevy S10 - GMC S15 and Sonoma Accessories & Modifications

121 messages,  Last post on Dec 08, 2009 at 7:05 AM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, GMC S-15, Truck

Messages Page 9 of 12 1 ... 6 7 8 9 10 11 12 Prev Next Last

Go To Msg # Search This Discussion

#81 of 121 Re: Nothing is Impossible.... [damurf] by jpf Jul 08, 2006 (12:12 pm)
Replying to: damurf (May 01, 2006 12:04 pm) Go to your local supermarket or bookstore and check out the magazine section. There are usually several magazines that feature modifications and upgrades to pick up trucks. The back sections of the magazines provide information about the companies that do the modifications or parts. Good luck.
#82 of 121 1995 S10 with lift kit by pechols Jun 26, 2006 (7:13 am)
#83 of 121 1995 S10 with lift kit by pechols Apr 30, 2006 (7:49 am)
Bought my son a 1995 S10 4wd pickup that has a lift kit. The shifter hits the dash when you shift. Does anyone know if someone sells a rear transmission support bar that will lower the back of the transmission slightly.
#84 of 121 Tough one by whosyourwookie Jun 26, 2006 (7:13 am)
I don't know of any supports that are manufactured for this situation. How high is your lift? You may be better off trying to replace the shifter. That may be even easier than trying to locate or make your own bar (which can be done. Either by you or a company or friend that knows how to fabricate one to the correct specs. You may find one with 45 degree bend towards the rear that will ollow the shifter do fully move forward without hitting the dash. If you can't find something like this you may be able to remove the shifter and heat it with an torch and bend it yourself o(or someone with an oxy/acy set-up. I hope this helps. Good luck.
#85 of 121 1990 GMC S15 as a Tank by s15tank Jun 26, 2006 (3:07 pm)
#86 of 121 1990 GMC S15 as a Tank by s15tank Jun 26, 2006 (3:07 pm)
I just got a 1990 GMC s15 given to me and I love this truck, I need some input from some people pertaining to my idea of converting it to a tank. Me and a few buddies came up with this crazy idea of painting it with Rhino liner insted of paint, all black with chrome grill, bumpers, black 5 spoke rims low pro's with chrome dishes. I personally think it would look pretty crazy, what does everyone think? Replies to this message: hoodlatch (Oct 08, 2006 4:00 pm) s15tank (Sep 01, 2007 10:26 am)
#87 of 121 Re: S10 wheels [rbhoppe] by whitetrash Oct 08, 2006 (11:39 am)
Replying to: rbhoppe (Apr 08, 2006 2:41 pm) I have a 94 s10 2wd. I just bought a set of rims from a 78 trans-am and they bolt up fine and look great.
#88 of 121 Re: 1990 GMC S15 as a Tank [s15tank] by hoodlatch Oct 08, 2006 (4:00 pm)
Replying to: s15tank (Jun 26, 2006 3:07 pm) Sounds cool, however, don't you think all the chrome will clash with the black Rhino liner? Replies to this message: s15tank (Sep 01, 2007 10:26 am)
#89 of 121 Re: Question about my S-10 pickup [tmac449] by stuartmay Nov 18, 2006 (12:40 pm)
Replying to: tmac449 (May 09, 2005 9:46 pm) i have an 88 s-15 with the 4.3, honestly if u wanna get more power when u lift the trcuk just buy the 350 conversion kit, the motor mounts are about 50$ and u can find a cheap 350, but the 4.3 gets good milage for its size and its got a good amount of power, also you can get a crate 4.3 for around 1000$ so its a relatively cheap motor
#90 of 121 Re: tach install [robocop98] by stuartmay Nov 18, 2006 (1:10 pm)
Replying to: robocop98 (Jan 15, 2006 7:07 am) as for ther tach. one wire goes to ur + battery terminal, one to ur negative distributor cable, one to ur lights and one to ground, its a 10 minute installation

Messages Page 9 of 12 1 ... 6 7 8 9 10 11 12 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Accessories & Modifications