You are here:
Forums
Pickups
Chevrolet S-10 & GMC S15 Sonoma
Chevy S10 - GMC S15 and Sonoma Owners: Meet the Members

80 messages, Last post on Aug 27, 2009 at 6:59 PM
You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram
|
|
|---|---|
| Ok, to start I have a 1998 s10 2.2. Awhile back I had to replace a new left front spring ( i blew the original one into 2 peices, no idea how i did that) so i went ahead and replaced both springs and shocks. Well a little while later i started noticing some creaking and small popping noises. There were no noises before i replaced the spring and shock. I can push down on the right front bumper and it makes a large popping sound. It also makes the sound when i let the clutch out and start going at a stop, and when i back up, and over large bumps. Does anyone know the reason for this. I think it may have something to do with me replacing the spring or maybe with me mud riding so much. Any solutions. Thanks!! | |
|
Just rebuilt 2.2.ltr. sonoma engine runs fine but don't show oil pressure right it shows 80 plus when running and about 40 when its off, never owned sonoma before and this one was messed up when I bought it so don't know what to try. |
|
|
REPLACED OIL SENDING UNIT WITH GAUGE READS 55-60 LBS PRESSURE WORK FINE, NOW I HAVE REPLACED WITH NEW SENDING UNIT AND IT ALSO READS AROUND 60 LBS EVERYTHINGS GOOD, |
|
You are here:
Forums
Pickups
Chevrolet S-10 & GMC S15 Sonoma
Chevy S10 - GMC S15 and Sonoma Owners: Meet the Members
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2004 Chevrolet S-10
1990 GMC S-15



Browse by Board
Browse by Topic
Today's Chats