Sign In Join 



Ford Freestyle - Taurus X

7456 messages,  Last post on Nov 14, 2009 at 7:03 PM

You are in the Ford Freestyle Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Freestyle, Ford Taurus X, SUV


Messages Page 745 of 747
1
...
741
742
743
744
745
746
747
Prev
Next
Last
Go To Msg #
Search This Discussion

#7433 of 7456
Re: Pulling the plug [vrm] by stevedebi
Jan 15, 2009 (5:16 pm)
Reply

Replying to: vrm (Jan 15, 2009 3:55 pm)

"According to a local Ford dealer, the TaurusX is going to face a shortage of spare parts after 3 years. A few of the parts suppliers are on the verge of filing for bankruptcy. The suppliers who will remain in business will be overwhelmed with supporting the various models on the production line.
  
Discontinued models like the TaurusX will not be high on the list of these suppliers. "
 
Let's hope not, because the mechanical components used in the T-Rex are the same as the other Ford corporate platforms; same engine and transmission. So I wouldn't worry about major repairs. Maybe some of the smaller components, but I should imagine that if there is a market, some small overseas firm (i.e., China or similar) will step in and produce the parts.
 
I would be much more concerned about the Freestyle components. The engine has been used for a long time, so there should be no problem there, but that CVT is not common. Uncertainty about the CVT is the main reason I chose to not purchase my FS at the end of its lease.
#7434 of 7456
Re: Pulling the plug [stevedebi] by coldcranker
Jan 15, 2009 (5:46 pm)
Reply

Replying to: stevedebi (Jan 15, 2009 5:16 pm)

On another thread, we figured out there are about 350,000 CVT/3.0L_V6 tranny/engine combos out there in Ford500/Freestyle/Montegos out there in the world creating a market and cores.
#7437 of 7456
Re: Pulling the plug [coldcranker] by baggs32
Jan 26, 2009 (10:05 am)
Reply

Replying to: coldcranker (Jan 15, 2009 5:46 pm)

On another thread, we figured out there are about 350,000 CVT/3.0L_V6 tranny/engine combos out there in Ford500/Freestyle/Montegos out there in the world creating a market and cores.
 
Ford bought that CVT from another mfr right? If that's the case, what other models from other mfrs was it used in if any?
#7438 of 7456
Re: Pulling the plug [baggs32] by coldcranker
Jan 26, 2009 (10:33 am)
Reply

Replying to: baggs32 (Jan 26, 2009 10:05 am)

"Ford bought that CVT from another mfr right? If that's the case, what other models from other mfrs was it used in if any?"
 
Great question. Ford enlisted the German company ZF to modify the CVTs currently found in some models of MiniCoopers (at BMW dealerships) and Audi's. I don't know of any other applications of ZF's CVT transmission. The Freestyle's ZF-brand CVT (assembled in Ohio, by the way) is not exactly the same CVT found in those other vehicles, but it is similar, although I think our Freestyles use the same internal CVT chain as the Audi. I doubt the other models of ZF-brand CVTs would fit (external housing, bolt pattern, mechatronics).
 
The only advantage may be that BMW and Audi dealerships might be willing to work on our CVT, since there might be enough similarities. Some internal parts are probably shared between all these ZF family of CVTs. Ford dealerships are still probably our best hope.
#7439 of 7456
Re: Pulling the plug [coldcranker] by baggs32
Jan 29, 2009 (9:42 am)
Reply

Replying to: coldcranker (Jan 26, 2009 10:33 am)

I wouldn't worry about finding someone to work on the CVT. Finding parts would be my concern if anything. Since Ford, Audi, and BMW used similar CVT trannies I'd cross that worry off now. The parts should be plentiful for years to come if needed and don't forget about totalled models sitting in junk yards. Parts can easily be pulled out of them for use in another.
#7440 of 7456
Re: Pulling the plug [baggs32] by coldcranker
Feb 03, 2009 (10:09 am)
Reply

Replying to: baggs32 (Jan 29, 2009 9:42 am)

Good point, baggs32. Oddly, I do like junkyard diving. Haven't done it in about 5 years, but there may now be some good Freestyle carcasses (get it? -- 'car'casses) out there to pick some flesh off of. That CVT will be hard to get out of there. Sometimes the junkyard guy will pull the tranny out and hang if from a big hook in his warehouse.
#7441 of 7456
Re: Pulling the plug [coldcranker] by baggs32
Feb 03, 2009 (6:37 pm)
Reply

Replying to: coldcranker (Feb 03, 2009 10:09 am)

Sometimes the junkyard guy will pull the tranny out and hang if from a big hook in his warehouse.
 
I hear that's where Rocky goes to punch some 'car'casses now.
#7442 of 7456
Powertrain warranty by mchappell
Feb 22, 2009 (4:50 pm)
Reply
Am considering a used Freestyle. Can somebody confirm when the 5yr/60k powertrain warranty went into effect? According to Edmunds, the '05 and '06 powertrain is 3/36, and only the '07 has the 5/60. Some forum posts seem to imply that the 5/60 might have been on the '05 and/or the '06.
 
Thanks,
 
Mark

Messages Page 745 of 747
1
...
741
742
743
744
745
746
747
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement