Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Honda Element Honda Element
4704 messages, Last post on Nov 14, 2009 at 3:43 PM
You are in the Honda Element Forum. Your Hosts are steve_ & tidester
|
Hello everyone. I just bought OEM Honda Side Steps and a Hunter Brush Guard for my 2007 Honda Element EX 4wd. I'll post some pics once I receive them and put them on. I was just wondering if anyone has already put these on themself and have any tips for me. Any tips would be greatly appreciated!
|
|
|
Replying to: ragets (May 05, 2009 6:36 am) |
|
|
Well I went ahead and received my accessories and had a friend of mine install them for me. He did all 98% of it and I did like 2% of it. LOL, I wasn't much help anyway here is how we did it and how long it took and some obstacles we faced and had to overcome: Tail Light Guards - eBay - $69 + FREE shipping The directions (which weren't that great) said it would take about 10-15 minutes to complete. Well.... it took us about 15 minutes for each. It was relatively easy but just takes a little time. First you take out the two screws that hold the tail light in place. Then all you do is pop out the taillight. Then we placed the bracket around the piece that pops the tail light in. Pop the taillight back in. Then fit the tail light guard over the tail light and bolt in all the screws. make sure they are on correctly or they WILL scratch your tail gate and hatch. Even when they are on as tight fitting as they can they still leave a tiny scratch but hey, its worth it! They look great! Side Steps - HandA Accessories - $285 + $52.78 shipping Next we did the side steps. These are the OEM Side steps. We just followed the instructions that came with them and they went on relatively easy. They look great and took about an hour and a half to put them on. Hunter Brush Guard - eBay - $180 +$50 shipping The instructions that came with these might as well not have even came with them. Nothing was labeled and took us about 20 minutes to even find out what we needed to do. We bolted on the headlight guards to the main piece first. Next we found the pieces of the plastic that we needed to cut out to find the holes to bolt the guard on to. We almost thought the pieces were not going to bolt on because of 2 reasons: 1) On the drivers side the bracket piece almost didn't have the right spacing for the hole on the frame. 2) On the passenger side the radiator was bolted or connected on the frame by the holes on the frame. So we had to move that to get the main unit connected. That took a while. After that we connected the main unit to the big brackets connected to the frame of the car and turned it up so it was in the correct position on the front of the car. then we took off the two caps under the hood near where the headlight is bolted in. Everything was tightened up and is extremely sturdy. It will not even move when shook. It is very nice. In all, for the brush guard, it took about 4 hours to complete. My Element looks AWESOME now, in my opinion. I already had a few Element owners turning their heads watching, just on my 10 minute drive back home. It almost looks like a totally different vehicle. I really am liking it a lot! |
|
|
Check out what I just found: http://www.ccmoffroad.com/shop/index.php?l=product_detail&p=18 You can see a better picture of the Element here: http://cgi.ebay.com/ebaymotors/HONDA-ELEMENT-3-LIFT-KIT-2003-2009-4WD-2WD-EX-LX-- - SC_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca5102b0bQQitemZ2604673- - 37995QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_987wt_939 I have been waiting for one of these for months. 3" is a little more than I wanted. I was looking for more of a 2" lift but this one looks pretty sweet. I am really considering buying this for my Element. Has anyone else bought one of these or a kit like these? Any suggestions or help would be greatly appreciated. 
|
|
|
Replying to: ragets (Aug 26, 2009 9:33 am) Foresters had lift kits like that, 2" lift from springs, another 2" by adding spacers to the base. 2" was no problem, but folks that lifted them the full 4" had troubles with the transmissions - difficulty shifting and getting in to gears. The angle of the rear driveshaft changes dramatically with a 4" lift. My concern with an Element would be the same - tolerances are fairly tight for these unibody based vehicles.
|
|
|
Replying to: ateixeira (Aug 26, 2009 10:11 am) I talked to someone that did a lift on his, he used this CCM Offroad lift kit. He hasn't had any promblems with his yet, and he has had his for quite a while. No problems with shifting. The only thing he said is that once you get it done you have to find a place that can give it a really good 4 wheel alignment. That was about it. His looks so awesome. I can't wait till I can get it done on my Element
|
|
|
Replying to: ragets (Aug 28, 2009 8:27 am)
|
|
|
Replying to: ateixeira (Aug 28, 2009 8:39 am) If anyone else has any other suggestions or anything, please post them. Thanks |
|
|
|
| Has anyone modified the lower gate so that it swings out rather than down? I'm looking at a Element to transport a power wheelchair using a Bruno lift arm. The Element would be perfect if the lower rear hatch didn't act like a tail gate. | |
|
|
|
Model: Honda Element LX 2006 So I recently bought one of those DC splitter that I can plug in to the DC socket so I can charge my GPS while my daughter watches video. After a few hours of driving, I notice my remote lock is not working --problem #1 (at first I thought I needed a new battery for my remote lock/entry). Then I tried opening the door using the open/close button on the side of the driver seat and it's not working (problem # 2). Now, I have to use the key every time, I want to open/close the car. I also notice on first entry the internal entry light is not coming on (problem #3). The radio is not working as well (problem #4). I noticed however when I turn on the engine, the open/close button on the side of the driver seats work including the internal entry light. But the radio is totally dead. I haven't noticed any problems with my headlights and flashers. I thought I'd also share that I jammed a pair of sneakers under the passenger seat. I noticed there are wires under there and maybe I disconnected something. I also thought it could be a fuse but strangely enough the DC socket (lighter) where I plug in my GPS and my daughter's DVD player still work. It could another fuse??? Any advice would be helpful. Thank you, MaynardHE2006LX |
|
You are here:
Forums
SUVs Honda Element Honda Element
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Honda Element
Browse by Board
Browse by Topic
Today's Chats
