You have saved this page | See all saved pages
Dodge Neon SRT-4
528 messages, Last post on May 14, 2012 at 5:50 PM
You are in the Dodge/Plymouth Neon Forum.What is this discussion about? Dodge Neon SRT-4, Exterior, Sedan
#525 of 528 Re: electrical starting problems in 04 srt4 [srt4fool] by hero166
Jun 29, 2011 (2:29 pm)
Replying to: srt4fool (Oct 07, 2009 12:06 pm)
did you figure out your problem with you srt?? cause i am just starting to have problems with my car as well, and i don't know were to start ( all ready changed the camshaft sensor )
#526 of 528 My SRT-4 has some problems and by some i mean a lot. by cmthafknwilson
Nov 25, 2011 (2:43 am)
Hey guys, My SRT-4 is a piece of S$
# to me. It's a 2003 body with a 2005 motor and tranny swap (LSD). I bought it a while back from some hispanic guy who had just took the easy way out of fixing everything pretty much. He just rigged the whole car such as he cracked the oil pan and took some silly puddy and cemented it on to hold the crack. (not literally silly puddy but i don't remember the name) He had also broke the TPS sensor to the car and just cemented the wires back into the slots on the broke sensor and just left it.. Personally, i'm surprised that it still moves. I bought it unaware of all these problems because it was for sale for 4,500.. i knew that there was some problems coming in hand but not like this. ANYWAYS one day, the car stopped going in to gear so easy. It eventually just gave out and it wouldn't go into gear without it being slammed so i put it in the garage and ordered me a new clutch. while i was pulling apart the clutch and tranny, i noticed that the master cyl and the slave were toast so it took me a while to buy my new parts. After i got them both installed, i started my baby back up and it was running fine but then i looked at the cluster gauge and the needles were on the wrong side of the prong that held it at 0MPH and same as the RPM gauge. Only weird thing was that my Temp, Boost, and the gas gauge was working fine. After that i let it warm up and gave it some gas, i'd say it went to about 2.5 RPMS and started cutting out and backfiring. I have no clue what this problem is, nor will it still go into gear. (The RPM and MPH gauge are still stuck saying that i'm at about 310 MPH and at 25 RPMS. I've put well over 2,000 dollars into new parts on this bucket and still WONT go. Just curious if anyone else had any of these problems and can offer me some help . Thanks a lot. Any advice is helpful, please throw it my way!
#527 of 528 STOCK SRT4 by lokillo
Feb 10, 2012 (11:57 am)
Hi im new in here and ive got an 2003 stock srt4 and i was wondering what could be my first mods to do, any help please#528 of 528 Crankshaft Position Sensor by tinnern
May 14, 2012 (5:50 pm)
My grandson’s check engine light on his 05 Dodge Neon came on and the car stumbles under acceleration. He’s also noticed it is sucking down gas. He can get up to speed if he accelerates slowly. Took it to Advanced Auto and they read the code: Crankshaft Position Sensor / Intermittent. He said either the sensor was breaking down or it could have an oil leak that is causing the sensor to not read properly. He also said we should take it to the dealer to have them diagnose the problem as they could tell for sure what the problem is. I’ve never worked on a Neon before, has anyone else had this problem? Where is the crankshaft position sensor located on a 05 Neon? Thanks.To POST a message, please
Sign In.
Advertisement
Most Popular in Forums
Search Forums
Enter Keyword(s):
Learn More, Do More
Edmunds Community
Advertisement